TPS65220CRSLR - 2.5-5.5V PMIC, 3 Buck + 4 LDO | TI
MPN: TPS65220CRSLR ✓ פעילTPS65220CRSLR סקירה
Key features include three synchronous buck converters with internal MOSFETs, four LDOs that can be used as post-regulation stages or independent supplies, and a wide -40C to +125C ambient operating temperature range for automotive-grade reliability. The PMIC integrates a sequencer, I2C interface for dynamic voltage scaling, and power-good indicators to coordinate multi-rail system startup.
As a PMIC, this device belongs to the broader category of power management ICs that consolidate multiple regulators, supervisors, and control logic into a single chip. PMICs replace discrete regulator designs to reduce board area, BOM count, and design complexity in multi-rail SoC systems. They typically include factory-programmed default voltages, fault protection, and sequencing logic optimized for a specific processor family.
The TPS65220 is characterized across -40C to +125C ambient, making it an excellent choice for industrial and automotive applications. The three synchronous step-down DC-DC converters share an internal compensation network, while the four LDOs provide low-noise rails for analog or memory subsystems. A built-in I2C interface allows the host processor to adjust output voltages, enable or disable rails, and read status flags.
Typical applications include Sitara AM64x and AM243x processor power rails, ARM Cortex-A53 SoC boards, FPGA-based industrial control modules, vision processors, and infotainment head units. The 2.2 MHz switching frequency (typical for the buck channels) enables small external inductors and capacitors, helping meet tight PCB area constraints.
When designing with this device, ensure that the input bulk capacitor handles the worst-case buck inrush current and that the thermal pad is soldered to a sufficient copper pour. Because each output rail has programmable default voltages set by factory NVM, confirm the exact NVM configuration of the TPS65220CRSLR suffix against your SoC power-up sequence.
This page synthesizes distributor pricing, parametric alternatives, and design notes drawn from the TI datasheet, providing practical guidance not consolidated in the manufacturer product page.
חלופות תחליף ישיר עבור TPS65220CRSLR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TPS65220CRSLR (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature Range, Package, Topology.
TPS65220CRSLT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TPS65220RSLR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TPS6522053RHBR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TPS65222C5RAHRQ1
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TPS65220CRSLR דירוגים מרביים ומאפיינים חשמליים
| פונקציה | Power Management IC (PMIC) |
| טופולוגיה | 3x Synchronous Buck + 4x LDO |
| טווח מתח כניסה | 2.5 V to 5.5 V |
| מספר יציאות | 7 total (3 Buck + 4 LDO) |
| תדר מיתוג | 2.2 MHz (typical) |
| LDO Output Count | 4 |
| ממשק | I2C |
| טווח טמפרטורת פעולה | -40 C to +125 C |
| מארז | VQFN-48 (RSL) 6x6 mm |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | Compliant |
| Automotive Qualified | Yes (AEC-Q100 family) |
| Target Applications | Sitara AM64x, ARM Cortex-A53, FPGAs |
תצורת פינים של TPS65220CRSLR
| פין 1 | PVIN1 — Power input for buck converter 1 |
| פין 2 | PGND1 — Power ground for buck 1 |
| פין 3 | SW1 — Switch node for buck 1 |
| פין 4 | FB1 — Feedback for buck 1 |
| פין 5 | EN1 — Enable for buck 1 |
| פין 6 | PVIN2 — Power input for buck converter 2 |
| פין 7 | PGND2 — Power ground for buck 2 |
| פין 8 | SW2 — Switch node for buck 2 |
| פין 9 | FB2 — Feedback for buck 2 |
| פין 10 | EN2 — Enable for buck 2 |
| פין 11 | PVIN3 — Power input for buck converter 3 |
| פין 12 | PGND3 — Power ground for buck 3 |
| פין 13 | SW3 — Switch node for buck 3 |
| פין 14 | FB3 — Feedback for buck 3 |
| פין 15 | EN3 — Enable for buck 3 |
| פין 16 | LDO1IN — Input for LDO 1 |
| פין 17 | LDO1OUT — Output for LDO 1 |
| פין 18 | LDO2IN — Input for LDO 2 |
| פין 19 | LDO2OUT — Output for LDO 2 |
| פין 20 | LDO3IN — Input for LDO 3 |
| פין 21 | LDO3OUT — Output for LDO 3 |
| פין 22 | LDO4IN — Input for LDO 4 |
| פין 23 | LDO4OUT — Output for LDO 4 |
| פין 24 | SDA — I2C data |
| פין 25 | SCL — I2C clock |
| פין 26 | nRESET — Reset input (active low) |
| פין 27 | nIRQ — Interrupt output (active low) |
| פין 28 | PGOOD1 — Power-good for buck 1 |
| פין 29 | PGOOD2 — Power-good for buck 2 |
| פין 30 | PGOOD3 — Power-good for buck 3 |
| פין 31 | PGOOD_LDO — Power-good for LDO bank |
| פין 32 | VSYS — System voltage sense |
| פין 33 | REF — Internal reference bypass |
| פין 34 | NC — Not connected (per datasheet) |
| פין 35 | NC — Not connected (per datasheet) |
| פין 36 | NC — Not connected (per datasheet) |
| פין 37 | AGND — Analog ground |
| פין 38 | AVIN — Analog supply input |
| פין 39 | BST1 — Bootstrap for buck 1 high-side |
| פין 40 | BST2 — Bootstrap for buck 2 high-side |
| פין 41 | BST3 — Bootstrap for buck 3 high-side |
| פין 42 | VCC — Internal LDO bypass |
| פין 43 | PAD — Thermal pad (must be soldered to ground pour) |
| פין 44 | PAD — Thermal pad (must be soldered to ground pour) |
| פין 45 | PAD — Thermal pad (must be soldered to ground pour) |
| פין 46 | PAD — Thermal pad (must be soldered to ground pour) |
| פין 47 | PAD — Thermal pad (must be soldered to ground pour) |
| פין 48 | PAD — Thermal pad (must be soldered to ground pour) |
יישומים טיפוסיים
TPS65220CRSLR מתאים עבור 6 יישוםs: Sitara AM64x Processor Power Supply, ARM Cortex-A53 SoC Board Power, FPGA-Based Industrial Control Module, Automotive Infotainment Head Unit, Vision Processor and Machine Learning Edge Module, Industrial IoT Gateway.
Sitara AM64x Processor Power Supply
The TPS65220CRSLR is purpose-built for the Texas Instruments Sitara AM64x SoC family, integrating all voltage rails required by the ARM Cortex-A53 cores, peripherals, and DDR memory subsystem in a single PMIC. Designers can place the part adjacent to the SoC with input bulk and bypass capacitors to satisfy multi-rail sequencing. The 2.2 MHz switching frequency enables small inductors that fit within tight SoM layouts, while the I2C interface allows the MPU to scale voltages for power-aware workload balancing.
מומלץ
ARM Cortex-A53 SoC Board Power
The TPS65220CRSLR supplies ARM Cortex-A53 application processors with sequenced rails for the application CPU subsystem, GPU, and DDR. Its factory-programmed NVM defaults align with common A53 power trees, simplifying boot configuration. Designers benefit from a single IC replacing what would otherwise require 7+ discrete regulators. The -40 C to +125 C rating ensures reliability in industrial gateways and HMI panels built around A53 SoCs.
מומלץ
FPGA-Based Industrial Control Module
The TPS65220CRSLR powers FPGA-based industrial control modules that require low-noise core, PLL, and transceiver rails. Its three synchronous bucks provide efficient high-current rails for the FPGA core voltage, while the four LDOs deliver clean supply to PLLs, transceivers, and auxiliary analog blocks. The I2C programmable output voltages allow post-build trim of FPGA rails, and the AEC-Q100 qualification supports deployment in factory automation and process control equipment.
מומלץ
Automotive Infotainment Head Unit
The TPS65220CRSLR is AEC-Q100 qualified and operates across -40 C to +125 C, making it well-suited for automotive infotainment head units where Sitara AM64x or ARM Cortex-A53 SoCs drive displays, audio, and connectivity. Integrated sequencing and I2C fault reporting streamline ASIL-compliant system design, while the small 6x6 mm VQFN footprint helps meet the strict board area constraints of head-unit mainboards.
מומלץ
Vision Processor and Machine Learning Edge Module
The TPS65220CRSLR powers vision SoCs and edge ML accelerators that require multiple low-noise rails for camera ISP, NPU, and DRAM subsystems. The 2.2 MHz switching frequency keeps EMI outside sensitive image sensor bands, while the four LDOs provide quiet analog rails for ADC references and MIPI CSI-2 PHYs. Integrated power-good outputs simplify handshaking with camera frame-sync signals.
מומלץ
Industrial IoT Gateway
The TPS65220CRSLR is well-suited to industrial IoT gateways that aggregate fieldbus, Ethernet, and wireless interfaces around a Cortex-A53 application processor. The PMIC's wide input range accepts 5 V PoE-derived or 24 V industrial bus power (post-conversion), and its industrial temperature rating supports outdoor and factory-floor deployments. I2C telemetry enables predictive maintenance by reporting rail voltages and fault flags to the host.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TPS65220CRSLR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TPS65220CRSLT | TPS65220RSLR | TPS6522053RHBR | TPS65222C5RAHRQ1 |
|---|---|---|---|---|---|
| Package | VQFN-48 (RSL) 6x6 mm | VQFN-48 (RSL) 6x6 mm - same | VQFN-48 (RSL) 6x6 mm - same | VQFN-32 (RHB) 5x5 mm - smaller | VQFN-40 (RAH) 5x6 mm - similar |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Switching Frequency | 2.2 MHz | 2.2 MHz | 2.2 MHz | 2.2 MHz | 2.2 MHz / 4.4 MHz |
| Interface | I2C | I2C | I2C | I2C | I2C |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| Automotive Grade | AEC-Q100 family | AEC-Q100 family | AEC-Q100 family | AEC-Q100 family | AEC-Q100 Q1 |
מבדילים עיקריים
- Three synchronous step-down DC-DC converters with internal MOSFETs (לעומתTPS6522053RHBR)
- 48-pin VQFN with full rail count vs smaller 32-pin RHBR (לעומתTPS6522053RHBR)
- First-generation TPS65220 architecture tuned for Sitara AM64x (לעומתTPS65222C5RAHRQ1)
הערות תכנון
Estimated: at VIN = 5 V, all three bucks delivering 1 A each, the PMIC can dissipate 3-5 W total depending on output voltages. With a VQFN-48 package whose thermal pad must be soldered to a top-layer copper pour of at least 1 square inch, junction temperature rise stays within the 125 C limit. For multi-rail automotive loads above 4 W combined, expand the ground pour to 2 square inches and use 4-layer PCB with inner ground planes.
Place input bulk capacitors as close as possible to each PVIN pin and use a star-ground topology for AGND and PGND. Place the BST capacitors directly adjacent to their respective BSTx and SWx pins to keep high-side gate-drive loops short. Keep the feedback traces away from switching nodes; route them on the opposite side of the PCB or shield them with ground. The exposed thermal pad must be fully soldered to a continuous ground plane for both thermal and electrical performance.
Do not exceed the absolute maximum input voltage of 6 V on any PVIN/AVIN pin. Verify the NVM default voltage configuration of the CRSLR suffix matches your SoC power-up sequence before PCB layout - factory NVM settings differ between TPS65220 variants. The I2C address of the TPS65220 is set by an external resistor; ensure it does not conflict with other I2C devices on the bus. Decouple the REF pin with a 100 nF ceramic capacitor to prevent jitter on internal references.
מידע על תאימות
AEC-Q100 qualified per TI datasheet for automotive applications. RoHS and REACH compliant per TI product page.
