STMicroelectronics

TS321IDT - 30V Single 800kHz Op Amp | STMicroelectronics

MPN: TS321IDT ✗ סוף ייצור
30 V Vdss 8-pin SOIC Package
כמות הזמנה מינימלית: 1 |

TS321IDT סקירה

The STMicroelectronics TS321IDT is a single bipolar operational amplifier with an 800 kHz gain-bandwidth product, a 30 V total supply rating, and an 8-pin SOIC package. Designed for cost-sensitive applications where space efficiency matters, the TS321IDT provides a practical general-purpose amplification stage for industrial control, instrumentation, sensor interfaces, and low-frequency signal-conditioning circuits.

An operational amplifier is an active analog component that uses high-gain differential feedback to amplify the difference between two input voltages. Within the product hierarchy, the TS321IDT is a general-purpose operational amplifier, a bipolar linear amplifier, and a member of the broader analog IC and semiconductor families. Its role is to increase signal amplitude while maintaining the closed-loop behavior established by external resistors or feedback networks.

Key characteristics include the single-amplifier configuration, 800 kHz bandwidth, and 30 V maximum supply voltage. The manufacturer describes the device as a bipolar operational amplifier intended for compact, cost-sensitive designs. Its performance approach is intended to match or better selected industry-standard devices such as the LM358A and LM324 families, providing a familiar general-purpose solution without requiring a high-speed or precision-amplifier architecture.

The TS321IDT operates from a dual supply extending to plus or minus 15 V, equivalent to a maximum total supply of 30 V. Its single-amplifier organization makes it appropriate when the PCB does not justify a dual or quad amplifier. Because it is a bipolar part rather than a CMOS amplifier, engineers should pay particular attention to input bias current, offset behavior, common-mode range, and output-swing limits during precision signal-chain design.

Typical uses include buffering sensor outputs, amplifying low-level analog signals, active filtering, gain stages in measurement systems, and general industrial signal conditioning. It is particularly useful in compact equipment where an 8-pin SOIC footprint provides more mechanical flexibility than a small-outline package while maintaining low cost and straightforward PCB assembly.

When laying out a TS321IDT circuit, place input, output, and decoupling connections according to the manufacturer pin-description table and keep feedback resistors close to the amplifier where practical. Confirm the required input common-mode voltage and output swing against the actual signal range. Stable operation also depends on suitable output loading and the compensation or feedback network selected for the intended gain.

This page combines manufacturer and distributor information with an obsolete-lifecycle assessment, same-footprint alternatives, application guidance, and design considerations. It helps engineers distinguish a genuine circuit-compatible replacement from a merely similar single amplifier before committing a redesign to an active device.

חלופות תחליף ישיר עבור TS321IDT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם TS321IDT (אותו גורם צורה וטביעת רגל) — שונים ב Package, Number of Channels, Product Type.

Texas Instruments
Package: SOT-23-5 (DBV)
Number of Channels: 1 (Single)
השווה עם TS321IDT →
Texas Instruments
Package: SOIC-8 (D)
Product Type: Single bipolar operational amplifier
השווה עם TS321IDT →
STMicroelectronics
Package: SOT-23-5
השווה עם TS321IDT →

TS321ID

✅ Drop-In
Texas Instruments
📦 SOIC-8
Single bipolar operational amplifier · 1 circuit · 30 V · 800 kHz · -40 °C to +125 °C · SOIC-8 (D) · 8 pins · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TLV9301IDBVR

✅ Drop-In
Texas Instruments
📦 SOIC-8
1 (Single) · Standard (General Purpose) Op Amp · Rail-to-Rail Output (RRO) · CMOS (MUX-friendly, rail-to-rail on positive rail) · 1 MHz · ±0.5 mV (typ) · ±2 µV/°C (typ)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TL031CDR

✅ Drop-In
📦 SOIC-8
Same 8-pin SOIC footprint, but bandwidth and input-bias behavior differ and must be checked for the intended circuit

📋 חלופה להתייחסות (לא בקטלוג)

TS321IDT דירוגים מרביים ומאפיינים חשמליים

Product Type Single general-purpose operational amplifier
Amplifier Architecture Bipolar operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 800 kHz
Maximum Total Supply Voltage 30 V
Nominal Supply Configuration Plus or minus 15 V
מארז 8-pin SOIC
סוג הרכבה Surface mount

מדריך תצורת פינים של TS321IDT 8-pin soic

תצורת פינים עבור TS321IDT (מארזת 8-pin soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin soic עבור TS321IDT

אין נתוני פריסת פינים מפורטים עבור TS321IDT.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TS321IDT מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Measurement and Instrumentation Front Ends, Active Filtering and Gain Stages, Power Supply and Control Monitoring, Audio and Communication Interface Circuits, Legacy Equipment Maintenance.

🏭

Industrial Sensor Signal Conditioning

The TS321IDT can condition low-level sensor signals in industrial equipment when the source operates within the amplifier's input common-mode range. Its single bipolar channel is useful for buffering, gain adjustment, or active-filter functions where a dual or quad amplifier would leave unused circuitry. The 800 kHz gain-bandwidth product supports modest-bandwidth measurements, while the 30 V total supply rating accommodates plus or minus 15 V analog rails. Engineers should calculate the closed-loop gain against bandwidth, verify output swing, and assess the sensor's source impedance because bipolar input bias current can affect high-impedance sources.

🔧

Measurement and Instrumentation Front Ends

The TS321IDT is suited to low-frequency measurement front ends that require a compact, single-channel general-purpose amplifier. It can amplify a bridge-derived or buffered sensor signal, add gain around a transducer, or drive the input of a subsequent converter. Its 800 kHz gain-bandwidth product is appropriate for many instrumentation channels that do not require high-frequency precision, and the 30 V supply limit supports laboratory and industrial rails. The circuit must maintain the input and output inside the common-mode and swing limits defined by the manufacturer datasheet, with particular attention to offset and bias-current requirements.

🌐

Active Filtering and Gain Stages

The TS321IDT can implement an active low-pass filter, inverting stage, or non-inverting gain block when component count and PCB area are important. A single SOIC-8 amplifier allows a feedback network to be placed close to the device, reducing parasitic effects in moderate-frequency designs. The 800 kHz gain-bandwidth product should be compared with the desired closed-loop gain and phase margin, while the output load must remain within the device's drive capability. Because the TS321IDT is obsolete, an existing filter should preserve its network values and verify an active replacement's stability and output behavior before production release.

⚡

Power Supply and Control Monitoring

The TS321IDT can amplify a scaled voltage from a power-supply or industrial control circuit when a dedicated precision amplifier is unnecessary. A resistive divider can bring the monitored level into the amplifier's input common-mode range, after which closed-loop feedback establishes the required gain. Its plus or minus 15 V capability is useful in equipment that already uses bipolar analog rails. The key design checks are the input offset at the monitored level, output headroom during fault conditions, and whether the loop remains stable at the selected gain. An active replacement should be preferred for newly designed monitoring systems.

🎧

Audio and Communication Interface Circuits

The TS321IDT can be used in low-frequency audio or communications interface paths where a compact, economical single amplifier is sufficient. It may buffer a line-level signal, provide modest voltage gain, or form part of an active equalizer and filtering network. The 800 kHz gain-bandwidth product covers a substantial audio-band application while remaining modest compared with modern high-speed amplifiers. Designers should calculate the required gain, check headroom for the largest expected waveform, and confirm that the input bias current does not excessively load the source. Existing audio boards should validate an obsolete-status replacement for channel-to-channel behavioral differences.

🖥️

Legacy Equipment Maintenance

The TS321IDT is most appropriate for maintaining an existing piece of industrial or test equipment whose circuit has already been qualified around the original amplifier. Its 800 kHz bandwidth, 30 V supply capability, and single-channel organization allow a direct circuit-level comparison with the installed device. Since the STMicroelectronics part is obsolete, use the original schematic, manufacturer pin table, and electrical-characteristics data to verify any substitute before installation. Legacy maintenance also requires attention to traceability, storage, soldering practices, and the possibility that the amplifier is no longer the only obsolete component in the assembly.

What are the key specifications of TS321IDT that engineers should know?
The TS321IDT is a single bipolar general-purpose operational amplifier with an 800 kHz gain-bandwidth product, a 30 V total supply limit, and an 8-pin SOIC package. According to the STMicroelectronics TS321 datasheet, it is intended for cost-sensitive applications where space saving is important. The device can operate from a dual plus or minus 15 V supply, while its exact input offset, bias current, slew rate, common-mode range, and operating-temperature limits should be confirmed from the manufacturer specifications before final circuit release.
Where can I download the TS321IDT datasheet PDF?
The TS321IDT datasheet PDF can be opened through the datasheet link on this page or through the STMicroelectronics TS321 documentation listed in the data sources. The manufacturer document identifies the TS321 as a low-power, single, bipolar operational amplifier for cost-sensitive and space-constrained applications. Use the manufacturer pin-description table and electrical-characteristics tables to verify the exact supply limits, common-mode range, input offset, bias current, output swing, and temperature-grade information for the ordered device.
Where can I find the TS321IDT pinout?
The TS321IDT pinout is found in the manufacturer datasheet under the pin-description table for the 8-pin SOIC package. The package drawing identifies the physical terminal arrangement, while the pin table maps each terminal to its circuit function. Assign PCB tracks from that table rather than inferring connections from an amplifier block diagram, because unused and supply terminals must be connected according to the exact ordering information. The public pinout is not reproduced here to avoid introducing any discrepancy with the manufacturer package drawing.
Is the STMicroelectronics TS321IDT still active?
No, the STMicroelectronics TS321IDT is marked obsolete, so new production purchasing is not appropriate without an approved lifecycle exception. Obsolete status creates supply-continuity and counterfeit-control concerns for long-lived equipment. According to the manufacturer and distributor lifecycle information associated with this device, engineers should qualify an active replacement, migrate existing assemblies, and use the Request a Quote form on this page when checking availability or sourcing support for legacy inventory.
What is TS321IDT used for?
The TS321IDT is used as a general-purpose signal-conditioning amplifier in low-frequency analog circuits. According to the STMicroelectronics datasheet, its single bipolar channel is suitable for cost-sensitive applications where space saving is important and its characteristics are intended to match or better selected LM358A and LM324-family devices. Typical roles include sensor buffering, non-inverting and inverting gain stages, active filtering, measurement-signal conditioning, and general industrial control interfaces operating within the device's supply and common-mode limits.
What supply voltage can TS321IDT operate from?
The TS321IDT supports a maximum total supply voltage of 30 V and is commonly described for operation at plus or minus 15 V. This rating describes the overall span from the negative supply terminal to the positive supply terminal, not the permitted magnitude of each rail independently. According to the TS321 manufacturer datasheet, applications must also respect the input common-mode range and output-voltage swing, which can be narrower than the total supply rating. Confirm both limits when designing single-supply or asymmetric-rail circuits.
TS321IDT vs TLV9301 - which is better for a new design?
The TLV9301 is generally the better starting point for a new design because it is active and offers upgraded functionality, whereas the STMicroelectronics TS321IDT is obsolete. According to the TI TS321 product information, the TLV9301 is a drop-in replacement for the compared TS321 device. It is specified as a single, 40 V, 1 MHz low-power operational amplifier. The higher supply rating and bandwidth add capability, but engineers should verify the exact package suffix, pinout, electrical limits, and stability for the intended feedback network.
TS321IDT vs TL031CDR - can TL031CDR replace TS321IDT?
The TL031CDR can be considered as a same-footprint single-amplifier alternative, but it should not be treated as an automatic functional substitute. The available comparison identifies both devices as 8-pin SOIC amplifiers, which supports footprint compatibility. Their input characteristics and internal design differ, however, so bias current, offset voltage, common-mode range, noise, stability, and output behavior must be reviewed for the intended circuit. The TS321IDT is the safer baseline for an existing design because its function and lifecycle status are well defined.
When should I choose TS321IDT over an active alternative?
Choose the TS321IDT only when maintaining an existing assembly, reproducing a qualified legacy circuit, or securing previously manufactured inventory takes priority over lifecycle risk. For new designs, an active device is preferable because it provides a clearer path for replenishment, documentation, and long-term support. If the original circuit must remain unchanged, verify the replacement's pinout, supply range, common-mode range, output swing, stability, and noise behavior against the manufacturer datasheet before treating it as interchangeable.
Is TS321IDT suitable for sensor signal conditioning?
Yes, the TS321IDT is suitable for many low-frequency sensor signal-conditioning applications within its electrical limits. Its 800 kHz gain-bandwidth product provides bandwidth for common temperature, pressure, level, and position sensing interfaces, while the single bipolar channel can buffer sensor outputs or implement closed-loop gain. The engineer should verify that the sensor output lies within the input common-mode range and that the selected closed-loop gain is stable. For high-impedance sources, input bias current should be checked because bipolar amplifiers can load the sensor.
Where can I buy TS321IDT online?
Use the Request a Quote form on this page to inquire about TS321IDT availability, minimum order quantity, and sourcing support. The STMicroelectronics TS321IDT is obsolete, so availability may depend on legacy inventory rather than active production. A quote request is the appropriate route for checking exact suffix, package, delivery status, and counterfeit-control requirements. Buyers should avoid treating an unrestricted marketplace listing as proof of current production or long-term supply continuity.
What is the price of TS321IDT?
The current commercial terms for the obsolete TS321IDT should be requested through the Request a Quote form on this page. Pricing can vary with exact ordering suffix, quantity, inspection requirements, inventory age, and traceability needs. Because the device is obsolete, a quote should confirm whether the offered units are original manufacturer stock, whether documentation is available, and whether suitable testing or traceability can be provided. Do not rely on a historical distributor figure as a guarantee of current availability.
What is the lead time for TS321IDT?
The lead time for TS321IDT must be confirmed through the Request a Quote form because the STMicroelectronics device is obsolete and is not represented as an actively produced catalog component. Lead time depends on remaining manufacturer inventory, lot traceability, order quantity, inspection, and shipping destination. For maintenance programs, request a lot-specific quotation and ask whether any replacement qualification is available. For new production, establish an active alternative rather than designing around an open-ended legacy supply commitment.
Is TS321IDT in stock?
Stock for the obsolete TS321IDT cannot be established reliably from a historical manufacturer status, so current availability should be requested through the Request a Quote form on this page. The response should identify whether units are immediately available, reserved from prior production, or subject to sourcing and inspection lead time. Because counterfeit exposure increases for obsolete components, ask for lot information, original manufacturer markings, traceability documentation, and inspection requirements before adding any quantity to a bill of materials.
What can replace TS321IDT?
The TLV9301 is the clearest published upgrade path, while the TL031CDR is a same-package alternative whose electrical characteristics require careful review. According to the TI TS321 product information, the TLV9301 provides a drop-in replacement with upgraded functionality and a 40 V, 1 MHz specification. For an existing board, confirm that the selected exact suffix uses the same 8-pin SOIC footprint and that the common-mode range, output swing, bias current, offset, and stability remain acceptable. Use the Request a Quote form for sourcing support.

נתוני עזר הנדסיים עבור TS321IDT — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Select the TS321IDT when maintaining a previously qualified legacy circuit and verified legacy inventory is more important than lifecycle continuity. Its single bipolar channel, 800 kHz bandwidth, and 30 V total supply rating make it suitable for conventional low-frequency signal conditioning, sensor buffering, filtering, and gain stages. For a new production design, prefer the TLV9301 because it is active, permits a 40 V total supply, offers 1 MHz bandwidth, and is identified as an upgraded drop-in path. The TI TS321ID is useful as a same-rating, same-package reference when evaluating manufacturer availability and qualification. The TL031CDR may suit an 8-pin SOIC design, but its differing input and dynamic characteristics require more careful validation. Before approving any replacement, check the exact package suffix, pin assignment, common-mode range, output swing, offset, bias current, stability, and operating-temperature grade.

השוואה עם חלופות

פרמטר מוצר זה TS321ID TLV9301 TL031CDR
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand STMicroelectronics Texas Instruments Texas Instruments Texas Instruments
Amplifier Channels 1 channel 1 channel 1 channel 1 channel
Product Class General-purpose operational amplifier General-purpose operational amplifier Low-power operational amplifier General-purpose operational amplifier

מבדילים עיקריים

  • Direct 800 kHz and 30 V functional baseline (לעומתTS321ID)
  • Higher-voltage active upgrade path (לעומתTLV9301)
  • Single-channel SOIC-8 implementation (לעומתTL031CDR)

הערות תכנון

Do not treat identical package dimensions as proof of electrical interchangeability. Before replacing the TS321IDT, compare the manufacturer pin-description table, input common-mode range, output swing, input offset, input bias current, supply current, gain-bandwidth product, and stability behavior. The TL031CDR uses the same 8-pin SOIC footprint but has different internal characteristics, while the TLV9301 offers higher voltage and bandwidth ratings. Preserve the original feedback and compensation network until the revised circuit has been verified.

Keep feedback resistors and compensation components close to the amplifier, and route the inverting input with a short, low-leakage trace to reduce parasitic capacitance and noise pickup. Place the device ground connection directly into the quiet analog-ground system rather than forcing return current through a long loop beneath noisy switching nodes. Because the TS321IDT is a bipolar amplifier, high-impedance input traces can be affected by bias current and surface leakage; guard techniques may be useful when the source resistance is very high.

The 30 V rating is the total voltage between the positive and negative supply terminals, not permission to apply 30 V to either rail. Include startup and transient headroom when selecting supply rails, and add local supply bypassing with the capacitance and placement specified by the manufacturer. Check output-current demand against the device's load capability and verify that the feedback network does not pull the output into an unsupported region during saturation or shutdown.

Because the STMicroelectronics TS321IDT is obsolete, sourcing controls matter as much as electrical matching. Specify the exact MPN and package, request lot or traceability information where available, and define inspection requirements before approval. Avoid mixing the TS321IDT with another manufacturer's TS321 designation without verifying its temperature range, qualification status, documentation, and lifecycle. For new production, use the Request a Quote form to coordinate an active replacement and avoid extending dependence on legacy stock.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact TS321IDT ordering suffix. The device is an obsolete general-purpose operational amplifier rather than an automotive-qualified part.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

TS321IDT datasheet TS321IDT pinout TS321IDT specifications TS321IDT datasheet pdf TS321IDT equivalent TS321IDT replacement TS321IDT cross reference TS321IDT SOIC-8 op amp TS321IDT vs TLV9301 TS321IDT price TS321IDT stock STMicroelectronics TS321IDT

רכיבים ומונחים קשורים

STMicroelectronics TS321IDT TS321ID TLV9301 TL031CDR operational amplifier general-purpose amplifier bipolar operational amplifier single amplifier analog IC semiconductor signal conditioning sensor interface active filter gain stage gain-bandwidth product 800 kHz 30 V total supply voltage input common-mode range input bias current input offset voltage output swing SOIC-8 surface mount bipolar linear amplifier
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר