STMicroelectronics

TS931BID - Micropower Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS931BID ✓ פעיל
2.7 V to 10 V Vdss 0.0003 uA Id 8-SOIC, 0.154 in (3.90 mm) body width Package
כמות הזמנה מינימלית: 1 |

TS931BID סקירה

The STMicroelectronics TS931BID is a single-circuit, micropower, rail-to-rail operational amplifier with a 2.7 V to 10 V supply range, packaged in an 8-pin SOIC. It is designed for general-purpose signal conditioning where low power consumption, rail-to-rail output capability, and operation from low-voltage supplies are important. The TS931BID combines a listed quiescent current of 0.0003 uA, input bias current of 1 pA, and a gain-bandwidth product of 100 kHz.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. The rail-to-rail output architecture allows the output signal to approach the supply rails more closely than a conventional amplifier with limited output swing. This makes the TS931BID useful for portable instruments, battery-powered sensors, low-voltage industrial controls, and other embedded systems that require amplification without a high-power supply.

Key characteristics include one amplifier circuit, rail-to-rail output operation, a 2.7 V minimum supply voltage, and a 10 V maximum supply voltage. The low 0.0003 uA quiescent-current figure supports energy-conscious designs, while the 1 pA input-bias-current specification reduces input-loading effects in high-impedance measurement paths. A listed 55 dB gain-bandwidth-related figure and 100 kHz bandwidth suit low-to-moderate-frequency precision signal applications.

The TS931BID belongs to the STMicroelectronics TS931 family of low-power operational amplifiers. Its 8-SOIC package supports conventional surface-mount assembly and provides a practical option for designs requiring a single amplifier in a small, standard package. Because the device operates from a 2.7 V supply, system-level signal ranges should be checked against the input common-mode and output-swing limits in the manufacturer datasheet.

Typical uses include low-voltage sensor interfaces, portable measurement equipment, battery-operated data-acquisition modules, industrial process monitoring, and embedded control systems. In a sensor interface, the amplifier can increase the usable signal level before an ADC samples it. In a portable instrument, its low quiescent current helps limit standby consumption. The relatively modest 100 kHz bandwidth favors precision and low-frequency measurements rather than high-speed signal processing.

PCB design should place input and feedback components close to the amplifier pins and maintain short, low-impedance traces to reduce noise pickup and parasitic feedback. Decoupling capacitors should connect directly between the supply and ground pins. Before substituting the TS931BID, verify supply voltage, input common-mode range, output swing, stability with the selected load capacitance, noise performance, and the exact pin assignment.

This page combines the identified TS931BID electrical characteristics, package information, sourcing context, and practical design guidance. It also organizes same-family alternatives and a parameter comparison to help engineers determine whether the device fits the required footprint, voltage range, bandwidth, and power budget.

חלופות תחליף ישיר עבור TS931BID — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם TS931BID (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Number of Circuits, RoHS Status.

STMicroelectronics
Amplifier Type: General Purpose, CMOS, Micropower
Number of Circuits: 1
RoHS Status: Compliant
השווה עם TS931BID →

TS931AID

✅ Drop-In ⚠️ מפרטים לא מאומתים
STMicroelectronics
📦 8-SOIC
Single operational amplifier, rail-to-rail output · 1 · 100 kHz · 2.7 V · 2.9 Vpp with RL = 100 kOhm

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TS931CID

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-SOIC
Same TS931 family and 8-SOIC footprint; ordering grade differs, requiring temperature-grade verification

📋 חלופה להתייחסות (לא בקטלוג)

TS931A

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-SOIC
Same TS931 family and 8-SOIC footprint; base ordering code may differ in grade and temperature range

📋 חלופה להתייחסות (לא בקטלוג)

TS931BILT

✅ Drop-In ⚠️ מפרטים לא מאומתים
STMicroelectronics
📦 8-SOIC
STMicroelectronics · General Purpose, CMOS, Micropower · 1 · Rail-to-Rail · 100 kHz · 2.7 V to 10 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TS931C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 8-SOIC
Same TS931 family and 8-SOIC footprint; base ordering code may differ in grade and temperature range

📋 חלופה להתייחסות (לא בקטלוג)

TS931BID דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Single-circuit general-purpose operational amplifier
Number of Circuits 1 circuit
סוג פלט Rail-to-rail
Supply Voltage Range 2.7 V to 10 V
זרם מנוחה 0.0003 uA
Input Bias Current 1 pA
Gain-Bandwidth Product 100 kHz
Listed Gain-Bandwidth Figure 55 dB
מארז 8-SOIC, 0.154 in (3.90 mm) body width
מספר פינים 8 pins
סוג הרכבה Surface mount
סטטוס RoHS ROHS3 compliant
Export Control Classification EAR99
Lead-Binish Nickel/Palladium/Gold (Ni/Pd/Au)

מדריך תצורת פינים של TS931BID 8-soic, 0.154 in (3.90 mm) body width

תצורת פינים עבור TS931BID (מארזת 8-soic, 0.154 in (3.90 mm) body width). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-soic, 0.154 in (3.90 mm) body width עבור TS931BID

אין נתוני פריסת פינים מפורטים עבור TS931BID.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TS931BID מתאים עבור 6 יישוםs: Battery-Powered Sensor Interfaces, Portable Measurement Instruments, Industrial Process Monitoring, Low-Voltage Data Acquisition, Smart Sensor and IoT Nodes, Audio and Bio-Signal Front Ends.

🔋

Battery-Powered Sensor Interfaces

The TS931BID is appropriate for amplifying weak sensor signals in battery-operated equipment because it operates from 2.7 V to 10 V and has a listed quiescent current of only 0.0003 uA. Its 1 pA input bias current also helps preserve the signal integrity of high-impedance sources. Place the amplifier between the sensor and an ADC or comparator, and keep the feedback network short and stable. The main trade-off is its 100 kHz gain-bandwidth product, which favors precision and low-frequency measurement rather than wideband acquisition.

🧰

Portable Measurement Instruments

The TS931BID can serve as the input amplifier in a handheld meter, recorder, or portable diagnostic instrument. Its low 0.0003 uA quiescent current helps conserve energy between measurements, while the 100 kHz bandwidth is sufficient for many slow analog signals. The 8-SOIC package also allows straightforward surface-mount assembly. Designers should calculate the closed-loop gain against the gain-bandwidth product and verify input offset, noise, and output-swing requirements at the lowest operating supply voltage.

🏭

Industrial Process Monitoring

The TS931BID is suitable for conditioning low-level industrial sensor signals when the system operates from a 2.7 V to 10 V rail. Its rail-to-rail output architecture helps preserve dynamic range in low-voltage instrumentation, while the 1 pA input bias current minimizes disturbance to high-impedance sensing elements. For process-control use, confirm the required temperature grade, noise performance, and long-term offset behavior in the STMicroelectronics datasheet. The 100 kHz bandwidth is appropriate for many slow process variables rather than fast transient capture.

📟

Low-Voltage Data Acquisition

The TS931BID can provide the analog gain stage ahead of a low-voltage ADC in a compact data-acquisition module. Its 2.7 V minimum supply allows operation from low-energy rails, and the 1 pA input bias current reduces loading of sensitive source networks. With a 100 kHz gain-bandwidth product, the amplifier is best matched to low-bandwidth or multiplexed acquisition channels. Validate the ADC input range, antialiasing network, settling requirements, and amplifier stability under the actual source impedance before layout release.

🧩

Smart Sensor and IoT Nodes

The TS931BID is appropriate for compact IoT nodes that amplify a sensor output before digitization or threshold detection. Its very low 0.0003 uA quiescent current supports battery-life objectives, and operation from 2.7 V suits low-energy supply rails. The single amplifier in an 8-SOIC package leaves board area for the radio, sensor, and digital controller. Avoid high closed-loop gains near the bandwidth limit, and check input bias, offset, noise, and common-mode behavior against the sensor's full operating range.

🎧

Audio and Bio-Signal Front Ends

The TS931BID can support low-frequency audio or bio-signal front ends when very low quiescent current is more important than wide bandwidth. The rail-to-rail output helps maximize signal range on a 2.7 V supply, while the 1 pA input bias current is favorable for high-impedance bioelectrodes. The 100 kHz gain-bandwidth product supports low-frequency instrumentation but not full audio-band amplification. For audio applications, verify noise density, input capacitance behavior, output drive, and the required frequency response in the manufacturer datasheet.

What is the TS931BID?
The TS931BID is a single-circuit, rail-to-rail, micropower operational amplifier from STMicroelectronics. According to the manufacturer datasheet, it operates from a 2.7 V to 10 V supply, offers a 100 kHz gain-bandwidth product, and is packaged in an 8-pin SOIC. It is intended for general-purpose low-voltage signal conditioning, measurement, and portable applications.
What is the supply voltage range of TS931BID?
The TS931BID operates from 2.7 V to 10 V. According to the STMicroelectronics datasheet, this range supports single-cell and low-voltage systems while avoiding the higher supply requirements of many conventional operational amplifiers. The actual signal and output ranges remain subject to the device's input common-mode and output-swing limits.
Is TS931BID a rail-to-rail operational amplifier?
Yes, the TS931BID has a rail-to-rail output stage. This allows its output to approach the positive and negative supply rails more closely than a conventional output architecture. The STMicroelectronics datasheet identifies the TS931 as a rail-to-rail micropower amplifier, but input common-mode coverage and exact output swing must still be checked for each design.
What are the key specifications of TS931BID that engineers should know?
The main TS931BID specifications are one amplifier circuit, a 2.7 V to 10 V supply range, rail-to-rail output, 0.0003 uA quiescent current, 1 pA input bias current, and a 100 kHz gain-bandwidth product. The STMicroelectronics datasheet lists the device in an 8-pin SOIC package, making it suitable for compact, low-frequency, low-power analog signal-conditioning circuits.
Where can I download the TS931BID datasheet PDF?
The TS931BID datasheet and technical documentation are available through STMicroelectronics and the linked documentation listings for this exact MPN. According to the manufacturer datasheet, use the electrical-characteristics table for operating limits and the pin-description table when assigning PCB tracks. The 8-SOIC footprint and exact pin names should always be checked against the current manufacturer document.
Where can I find the TS931BID pinout?
The TS931BID pinout is defined in the manufacturer datasheet for its 8-pin SOIC package. Use the pin-description table to identify the supply, ground, input, and output connections before laying out the board. The available product information confirms the 8-SOIC package but does not reproduce the complete numbered pin description, so the current datasheet remains the controlling document.
Where can I buy TS931BID online?
Use the Request a Quote form on this page to request TS931BID availability, order quantities, and current commercial terms. The form is the direct route for a response covering the exact TS931BID ordering code. Confirm the package, quantity, delivery schedule, and traceability requirements with the supplier before placing an order.
What is the price of TS931BID?
The current TS931BID commercial price depends on quantity, package, and supply status. Use the Request a Quote form on this page for a current quotation rather than relying on a historical catalog amount. When requesting the quote, state the required order quantity, target date, and whether reel, cut-tape, or another approved delivery format is needed.
What is the lead time for TS931BID?
The current TS931BID lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. Lead time can change with order quantity, manufacturing allocation, and packaging requirements. Include the planned installation date and annual usage estimate so the supplier can respond with an actionable delivery schedule.
Is TS931BID in stock?
Stock availability for TS931BID should be checked through the Request a Quote form on this page. Provide the quantity and required packaging so the supplier can confirm the current position for the exact TS931BID order code. Do not infer availability from a distributor index or general listing status without a direct confirmation.
What can replace TS931BID?
The closest replacements should use the same 8-SOIC footprint and remain within the 2.7 V to 10 V supply, bandwidth, power, and common-mode limits. The TS931 family variants TS931AID and TS931CID are same-brand drop-in candidates for ordering-code assessment. Confirm pinout, temperature grade, offset voltage, noise, and load stability in the manufacturer documentation before replacement.
Is TS931AID a drop-in replacement for TS931BID?
The TS931AID is a same-family candidate for a drop-in assessment because it uses the TS931 architecture and 8-SOIC package. The STMicroelectronics ordering codes can differ in grade or qualification, so verify the exact temperature and qualification requirements for the installed product. Confirm electrical limits and pin assignments before treating it as a production replacement.
When should I choose TS931BID over a lower-power op amp?
Choose the TS931BID when the circuit needs a 2.7 V to 10 V supply, rail-to-rail output, and a 100 kHz gain-bandwidth product while still prioritizing very low 0.0003 uA quiescent current. Select a lower-power amplifier only when its bandwidth, output swing, noise, offset, and input common-mode limits are also acceptable. The STMicroelectronics datasheet should drive the final comparison.
Is TS931BID suitable for battery-powered sensor interfaces?
The TS931BID is well suited to battery-powered sensor interfaces because it operates from a 2.7 V minimum supply and has a listed 0.0003 uA quiescent current. Its 1 pA input bias current can also minimize loading of high-impedance sensors. The STMicroelectronics datasheet should still be checked for input offset, noise, and common-mode behavior at the actual operating voltage.
TS931BID vs TS931CID - which is better for industrial equipment?
The TS931BID and TS931CID are same-family 8-SOIC candidates, but the appropriate ordering code depends on the required temperature grade and qualification. The TS931BID is the identified ordering option; the TS931CID may suit a different grade requirement. Compare the manufacturer ordering table, temperature ratings, and electrical limits before selecting either part for industrial equipment.
What is the best cross-brand equivalent for TS931BID?
No cross-brand drop-in equivalent can be confirmed from the available cross-reference information. A valid replacement must match the 8-SOIC footprint, 2.7 V to 10 V supply range, input common-mode behavior, output swing, 100 kHz-class bandwidth, and low-power requirements. Use the Request a Quote form to request a quote for TS931BID or ask the supplier to cross-reference the exact ordering code.

נתוני עזר הנדסיים עבור TS931BID — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the TS931BID when a design needs one low-power amplifier operating from a 2.7 V to 10 V supply, particularly when battery life and high source impedance are important. Its 0.0003 uA quiescent current, 1 pA input bias current, rail-to-rail output, and 100 kHz bandwidth form a useful combination for portable instruments, sensor interfaces, and low-speed process monitoring. Choose a faster amplifier such as the LM2904PWR when signal bandwidth or drive requirements exceed the TS931 capability. Choose a dual amplifier when two channels are needed in one package. TS931AID and TS931CID may be considered for same-family footprint reuse, but their ordering-grade and temperature requirements must be confirmed before substitution. No cross-brand drop-in candidate is established here, so any cross-brand redesign requires verification of pinout, common-mode range, output swing, noise, offset, stability, and supply limits.

השוואה עם חלופות

פרמטר מוצר זה TS931AID TS931CID TS931A TS931B TS931C
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Special Ordering Feature BID grade ordering code AID grade ordering code CID grade ordering code A base ordering code B base ordering code C base ordering code

מבדילים עיקריים

  • Very low quiescent current for general-purpose signal conditioning (לעומתLM2904PWR)
  • Compact single-amplifier 8-SOIC implementation (לעומתLM2902N/PB)
  • Low-voltage rail-to-rail operation (לעומתTLV2462IPWR)

הערות תכנון

Route the supply, ground, input, and feedback connections with short traces, and place input and feedback components close to the TS931BID pins. Connect the supply bypass capacitor directly between the supply and ground pins, with its ground end returning to the device ground through a low-impedance path. Keep sensitive input traces away from clocks, inductors, switching nodes, and the display or power-converter area to reduce coupled noise.

Do not assume rail-to-rail output means the input accepts every voltage present at the supply rails. Verify the input common-mode range, output swing, and supply limits in the STMicroelectronics datasheet. Also calculate the closed-loop bandwidth against the 100 kHz gain-bandwidth product. Excessive closed-loop gain can reduce usable bandwidth and make high-value feedback resistors more susceptible to parasitic capacitance.

For high-impedance sensors, keep the sensor and feedback nodes physically small and use guarding where leakage or board contamination matters. The listed 1 pA input bias current is beneficial for such sources, but temperature, humidity, contamination, and ESD protection still affect the complete measurement chain. Confirm the source impedance and sensor settling time in the intended operating environment.

Use the lowest supply voltage that still provides the required common-mode range and output swing, since the amplifier consumes power and its output-current capability can change with supply voltage and temperature. Place the device close to its decoupling capacitor and avoid long supply loops. The very low 0.0003 uA quiescent current does not eliminate the amplifier's dynamic-current demand at higher signal frequencies or output loads.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS3-compliant status and EAR99 classification are identified for TS931BID. The lead finish is listed as nickel/palladium/gold. REACH, halogen-free, AEC-Q100, and conflict-minerals status are not established by the available product information.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

TS931BID datasheet TS931BID datasheet pdf TS931BID pinout TS931BID specifications TS931BID equivalent TS931BID replacement TS931BID price TS931BID stock TS931BID SOIC-8 amplifier TS931BID micropower op amp STMicroelectronics TS931BID TS931BID vs TS931AID TS931BID sensor interface TS931BID application circuit TS931BID footprint

רכיבים ומונחים קשורים

STMicroelectronics TS931BID TS931AID TS931CID TS931A TS931B TS931C operational amplifier op amp single-supply amplifier rail-to-rail output micropower amplifier analog signal conditioner semiconductor 8-SOIC SOIC family surface-mount package 2.7 V minimum supply 10 V maximum supply 100 kHz gain-bandwidth product 1 pA input bias current 0.0003 uA quiescent current RoHS EAR99
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר