TS931BID - Micropower Rail-to-Rail Op Amp | STMicroelectronics
MPN: TS931BID ✓ Hoạt độngTS931BID Tóm tắt
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. The rail-to-rail output architecture allows the output signal to approach the supply rails more closely than a conventional amplifier with limited output swing. This makes the TS931BID useful for portable instruments, battery-powered sensors, low-voltage industrial controls, and other embedded systems that require amplification without a high-power supply.
Key characteristics include one amplifier circuit, rail-to-rail output operation, a 2.7 V minimum supply voltage, and a 10 V maximum supply voltage. The low 0.0003 uA quiescent-current figure supports energy-conscious designs, while the 1 pA input-bias-current specification reduces input-loading effects in high-impedance measurement paths. A listed 55 dB gain-bandwidth-related figure and 100 kHz bandwidth suit low-to-moderate-frequency precision signal applications.
The TS931BID belongs to the STMicroelectronics TS931 family of low-power operational amplifiers. Its 8-SOIC package supports conventional surface-mount assembly and provides a practical option for designs requiring a single amplifier in a small, standard package. Because the device operates from a 2.7 V supply, system-level signal ranges should be checked against the input common-mode and output-swing limits in the manufacturer datasheet.
Typical uses include low-voltage sensor interfaces, portable measurement equipment, battery-operated data-acquisition modules, industrial process monitoring, and embedded control systems. In a sensor interface, the amplifier can increase the usable signal level before an ADC samples it. In a portable instrument, its low quiescent current helps limit standby consumption. The relatively modest 100 kHz bandwidth favors precision and low-frequency measurements rather than high-speed signal processing.
PCB design should place input and feedback components close to the amplifier pins and maintain short, low-impedance traces to reduce noise pickup and parasitic feedback. Decoupling capacitors should connect directly between the supply and ground pins. Before substituting the TS931BID, verify supply voltage, input common-mode range, output swing, stability with the selected load capacitance, noise performance, and the exact pin assignment.
This page combines the identified TS931BID electrical characteristics, package information, sourcing context, and practical design guidance. It also organizes same-family alternatives and a parameter comparison to help engineers determine whether the device fits the required footprint, voltage range, bandwidth, and power budget.
Bộ thay thế dễ dàng lắp đặt cho TS931BID — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TS931BID (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Number of Circuits, RoHS Status.
TS931AID
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →TS931CID
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TS931A
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TS931BILT
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →TS931C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TS931BID Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Single-circuit general-purpose operational amplifier |
| Number of Circuits | 1 circuit |
| Kiểu đầu ra | Rail-to-rail |
| Supply Voltage Range | 2.7 V to 10 V |
| Điện áp yên tĩnh | 0.0003 uA |
| Input Bias Current | 1 pA |
| Gain-Bandwidth Product | 100 kHz |
| Listed Gain-Bandwidth Figure | 55 dB |
| Hộp | 8-SOIC, 0.154 in (3.90 mm) body width |
| Số lượng chân | 8 pins |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | ROHS3 compliant |
| Export Control Classification | EAR99 |
| Lead-Binish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Hướng dẫn cấu hình chân TS931BID 8-soic, 0.154 in (3.90 mm) body width
Cấu hình chân cho TS931BID (8-soic, 0.154 in (3.90 mm) body width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TS931BID.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TS931BID phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Interfaces, Portable Measurement Instruments, Industrial Process Monitoring, Low-Voltage Data Acquisition, Smart Sensor and IoT Nodes, Audio and Bio-Signal Front Ends.
Battery-Powered Sensor Interfaces
The TS931BID is appropriate for amplifying weak sensor signals in battery-operated equipment because it operates from 2.7 V to 10 V and has a listed quiescent current of only 0.0003 uA. Its 1 pA input bias current also helps preserve the signal integrity of high-impedance sources. Place the amplifier between the sensor and an ADC or comparator, and keep the feedback network short and stable. The main trade-off is its 100 kHz gain-bandwidth product, which favors precision and low-frequency measurement rather than wideband acquisition.
Được đề xuất
Portable Measurement Instruments
The TS931BID can serve as the input amplifier in a handheld meter, recorder, or portable diagnostic instrument. Its low 0.0003 uA quiescent current helps conserve energy between measurements, while the 100 kHz bandwidth is sufficient for many slow analog signals. The 8-SOIC package also allows straightforward surface-mount assembly. Designers should calculate the closed-loop gain against the gain-bandwidth product and verify input offset, noise, and output-swing requirements at the lowest operating supply voltage.
Được đề xuất
Industrial Process Monitoring
The TS931BID is suitable for conditioning low-level industrial sensor signals when the system operates from a 2.7 V to 10 V rail. Its rail-to-rail output architecture helps preserve dynamic range in low-voltage instrumentation, while the 1 pA input bias current minimizes disturbance to high-impedance sensing elements. For process-control use, confirm the required temperature grade, noise performance, and long-term offset behavior in the STMicroelectronics datasheet. The 100 kHz bandwidth is appropriate for many slow process variables rather than fast transient capture.
Được đề xuất
Low-Voltage Data Acquisition
The TS931BID can provide the analog gain stage ahead of a low-voltage ADC in a compact data-acquisition module. Its 2.7 V minimum supply allows operation from low-energy rails, and the 1 pA input bias current reduces loading of sensitive source networks. With a 100 kHz gain-bandwidth product, the amplifier is best matched to low-bandwidth or multiplexed acquisition channels. Validate the ADC input range, antialiasing network, settling requirements, and amplifier stability under the actual source impedance before layout release.
Được đề xuất
Smart Sensor and IoT Nodes
The TS931BID is appropriate for compact IoT nodes that amplify a sensor output before digitization or threshold detection. Its very low 0.0003 uA quiescent current supports battery-life objectives, and operation from 2.7 V suits low-energy supply rails. The single amplifier in an 8-SOIC package leaves board area for the radio, sensor, and digital controller. Avoid high closed-loop gains near the bandwidth limit, and check input bias, offset, noise, and common-mode behavior against the sensor's full operating range.
Được đề xuất
Audio and Bio-Signal Front Ends
The TS931BID can support low-frequency audio or bio-signal front ends when very low quiescent current is more important than wide bandwidth. The rail-to-rail output helps maximize signal range on a 2.7 V supply, while the 1 pA input bias current is favorable for high-impedance bioelectrodes. The 100 kHz gain-bandwidth product supports low-frequency instrumentation but not full audio-band amplification. For audio applications, verify noise density, input capacitance behavior, output drive, and the required frequency response in the manufacturer datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TS931BID — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TS931AID | TS931CID | TS931A | TS931B | TS931C |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Amplifier Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Special Ordering Feature | BID grade ordering code | AID grade ordering code | CID grade ordering code | A base ordering code | B base ordering code | C base ordering code |
Bảo phân biệt quan trọng
- Very low quiescent current for general-purpose signal conditioning (vsLM2904PWR)
- Compact single-amplifier 8-SOIC implementation (vsLM2902N/PB)
- Low-voltage rail-to-rail operation (vsTLV2462IPWR)
Ghi chú thiết kế
Route the supply, ground, input, and feedback connections with short traces, and place input and feedback components close to the TS931BID pins. Connect the supply bypass capacitor directly between the supply and ground pins, with its ground end returning to the device ground through a low-impedance path. Keep sensitive input traces away from clocks, inductors, switching nodes, and the display or power-converter area to reduce coupled noise.
Do not assume rail-to-rail output means the input accepts every voltage present at the supply rails. Verify the input common-mode range, output swing, and supply limits in the STMicroelectronics datasheet. Also calculate the closed-loop bandwidth against the 100 kHz gain-bandwidth product. Excessive closed-loop gain can reduce usable bandwidth and make high-value feedback resistors more susceptible to parasitic capacitance.
For high-impedance sensors, keep the sensor and feedback nodes physically small and use guarding where leakage or board contamination matters. The listed 1 pA input bias current is beneficial for such sources, but temperature, humidity, contamination, and ESD protection still affect the complete measurement chain. Confirm the source impedance and sensor settling time in the intended operating environment.
Use the lowest supply voltage that still provides the required common-mode range and output swing, since the amplifier consumes power and its output-current capability can change with supply voltage and temperature. Place the device close to its decoupling capacitor and avoid long supply loops. The very low 0.0003 uA quiescent current does not eliminate the amplifier's dynamic-current demand at higher signal frequencies or output loads.
Thông tin tuân thủ
RoHS3-compliant status and EAR99 classification are identified for TS931BID. The lead finish is listed as nickel/palladium/gold. REACH, halogen-free, AEC-Q100, and conflict-minerals status are not established by the available product information.