TUSB320RWBR - USB Type-C CC Controller | Texas Instruments
MPN: TUSB320RWBR ✓ פעילTUSB320RWBR סקירה
A USB Type-C configuration channel controller is an interface IC within the USB Type-C port ecosystem. USB Type-C uses dedicated CC pins to negotiate cable attachment, orientation, port roles, and the available current level. This controller connects that negotiation to the port-management circuitry, allowing a USB-C port to operate as a source, sink, or dual-role port without implementing the entire USB Type-C protocol in system firmware.
The TUSB320 supports host-only DFP, device-only UFP, and dual-role DRP operating modes. It advertises default, medium, and high Type-C current modes, with support for current advertisement and detection up to 3 A. Backward compatibility with USB Type-C specification 1.0 is important when the port must interoperate with earlier implementations and accessories. Its compact 1.6 mm by 1.6 mm package supports space-constrained consumer and embedded systems.
Technically, the device separates low-speed Type-C port management from the data path. CC signaling determines which direction the inserted cable is connected and which party supplies power, while the USB data lanes remain the responsibility of a host, device, or dual-role controller. This division improves design flexibility because the same connector can be used with several USB controllers or protocol bridges when their electrical and logical interfaces are compatible.
Typical applications include laptop and tablet docking stations, smartphone and accessory charging designs, USB-C expansion adapters, industrial USB-C equipment, and embedded systems that require reversible connector orientation detection. It is also suitable for USB-C power-management designs where the system must identify sink or source behavior before enabling the appropriate power path.
Designers should verify the exact pin assignments, electrical limits, VBUS behavior, and configuration-channel implementation against the manufacturer datasheet. PCB layout must keep the compact package’s connections short, provide clean device grounding, and follow the manufacturer’s recommended decoupling arrangement. Because the controller coordinates port behavior rather than carrying high-speed USB data, its placement priority is deterministic power sequencing and signal integrity rather than USB differential-pair routing.
This product page consolidates the TUSB320RWBR specifications, verified manufacturer and distributor links, family alternatives, comparison parameters, and practical selection guidance. It is intended to help engineers determine whether the 12-X2QFN Type-C controller supports their required roles, current mode, package, and system-management architecture.
חלופות תחליף ישיר עבור TUSB320RWBR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TUSB320RWBR (אותו גורם צורה וטביעת רגל) — שונים ב Package.
TUSB320IRWBR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TUSB320LAIRWBR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TUSB320LIRWBR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TUSB320RWBR מפרטים
| Product Type | USB Type-C configuration channel logic and port controller |
| Supported USB Type-C Specification | USB Type-C specification 1.1 |
| Backward Compatibility | USB Type-C specification 1.0 |
| Maximum Current Advertisement And Detection | 3 A |
| Host-Only Port Mode | DFP (source) |
| Device-Only Port Mode | UFP (sink) |
| Dual-Role Port Mode | DRP |
| Current Advertisement Modes | Default, medium, and high modes |
| Channel Configuration Function | CC (Configuration Channel) |
| Port Attachment Detection | Supported |
| Cable Orientation Detection | Supported |
| Port Role Detection | Supported |
| מארז | 12-X2QFN, 1.6 mm x 1.6 mm |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של TUSB320RWBR 12-x2qfn, 1.6 mm x 1.6 mm
תצורת פינים עבור TUSB320RWBR (מארזת 12-x2qfn, 1.6 mm x 1.6 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TUSB320RWBR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TUSB320RWBR מתאים עבור 6 יישוםs: USB-C Docking Stations, Laptop and Tablet Charging Ports, USB-C Expansion Adapters, Industrial USB-C Control Panels, USB-C Power-Path Management, Embedded USB-C Accessories.
USB-C Docking Stations
The TUSB320RWBR fits USB-C docking-station front ends that must identify an attached cable, determine orientation, and negotiate the permitted Type-C current before enabling a power path. Its DFP, UFP, and DRP operating options support host, peripheral, or dual-role service connectors. Current advertisement and detection up to 3 A helps coordinate default, medium, and high power modes, although the dock’s power supply, source controller, and protection switches must independently support the selected level. The compact 1.6 mm by 1.6 mm 12-X2QFN package also leaves board area for downstream USB, display, storage, and networking interfaces.
מומלץ
Laptop and Tablet Charging Ports
TUSB320RWBR can manage the USB-C connection in a compact charging port that must support reversible insertion and controlled power-role behavior. Orientation detection removes the need to infer cable direction from data-lane activity, while role detection supports source-only, sink-only, or dual-role product architectures. The 3 A advertisement-and-detection capability enables a system to request a higher Type-C current mode when its supply and thermal design permit. Designers should still coordinate VBUS switching, overvoltage protection, connector limits, and the host or peripheral controller so that a negotiated request always produces a safe power path.
מומלץ
USB-C Expansion Adapters
The TUSB320RWBR is applicable to small USB-C expansion adapters that need reliable attach, orientation, role, and current-mode handling without consuming excessive board area. The controller’s USB Type-C 1.1 support and compatibility with 1.0 accessories provide a practical baseline for adapter designs. A 12-X2QFN footprint allows the Type-C management section to sit close to the connector and reduces routing complexity around the receptacle. For multiport adapters, the designer must still implement separate CC lines or an appropriate muxing strategy and ensure the selected USB data controller matches the desired host, device, or dual-role behavior.
מומלץ
Industrial USB-C Control Panels
TUSB320RWBR can support USB-C service or maintenance connectors in industrial control equipment where reliable attachment and role negotiation are required. The controller handles configuration-channel logic while the product’s primary processor or programmable controller manages application data, enabling a physical connector to serve maintenance, configuration, or peripheral duties. Its compact package is useful in sealed or space-constrained control panels, while backward compatibility with USB Type-C 1.0 broadens the range of service cables that can be considered. Compliance for the finished industrial system must be assessed separately because the controller’s operating limits and qualification are not established by the product-page excerpt.
מומלץ
USB-C Power-Path Management
The TUSB320RWBR can provide Type-C negotiation signals for a power-path design that must distinguish source, sink, and dual-role behavior. Detecting cable orientation and the requested current mode before activating a switch reduces the chance of applying power in an unsuitable state. Support for Type-C current advertisement and detection up to 3 A allows the system to negotiate default, medium, or high operation, subject to the actual source and load capabilities. Firmware and hardware must coordinate the CC result with VBUS measurement, switch control, and fault handling; the controller itself should not be treated as the complete power-delivery solution.
מומלץ
Embedded USB-C Accessories
TUSB320RWBR fits embedded USB-C accessories that need automatic orientation handling and configurable port roles without using a large external microcontroller. A device-only design can use UFP behavior, while a product that sources power or supports both roles can use the available DFP or DRP modes. The 12-X2QFN package is particularly helpful in compact dongles, interface adapters, and control modules with limited connector clearance. Before finalizing the circuit, verify supply voltage, exposed-ground connections, CC pull or source behavior, and all operating limits in the manufacturer datasheet, because those details are required for a robust accessory implementation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TUSB320RWBR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TUSB320IRWBR | TUSB320LAIRWBR | TUSB320LIRWBR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 12-X2QFN (1.6 x 1.6 mm) | 12-X2QFN (1.6 x 1.6 mm) | 12-X2QFN (1.6 x 1.6 mm) | 12-X2QFN (1.6 x 1.6 mm) |
| Product Type | USB Type-C configuration channel logic and port controller | TUSB320-family USB Type-C controller | TUSB320-family USB Type-C controller | TUSB320-family USB Type-C controller |
| Attach, Orientation, And Role Detection | Supported | TUSB320-family port-management functions | TUSB320-family port-management functions | TUSB320-family port-management functions |
מבדילים עיקריים
- Compact Type-C port-management footprint (לעומתTUSB320IRWBR)
- Defined USB Type-C version coverage (לעומתTUSB320LAIRWBR)
- Explicit three-port-role support (לעומתTUSB320LIRWBR)
הערות תכנון
Place the TUSB320RWBR and its required support components close to the USB-C connector, keeping configuration-channel and VBUS-related routing short and away from noisy power-conversion stages. The 12-X2QFN package requires careful fanout from a 1.6 mm by 1.6 mm land pattern. Follow the manufacturer layout example for exposed-pad, ground, and component-placement details rather than generalizing from another QFN device.
Separate CC negotiation from power delivery. The controller can advertise and detect Type-C current up to 3 A, but the source, sink, VBUS switch, protection devices, connector, and cable must support the selected operating level. Add fault handling for VBUS overvoltage, reversed or invalid cable conditions, and failed power-path switching so that a configuration result cannot directly energize an unsafe load.
Do not treat TUSB320RWBR as a high-speed USB data controller. It manages configuration-channel signaling, attachment, orientation, role, and current mode, while USB data lanes remain connected to a separate host, device, or dual-role controller. Verify that software state transitions match the electrical role and that the CC implementation follows the manufacturer recommendation for the selected DFP, UFP, or DRP architecture.
Use a stable reference and ground strategy around the compact package, and observe the manufacturer’s recommended decoupling and exposed-pad connection instructions. Check the final assembly for adequate solder-joint access and verify the package drawing rather than relying only on the 1.6 mm by 1.6 mm body dimension. Pin numbering, pad geometry, and thermal construction must come from the exact TUSB320RWBR package drawing.
מידע על תאימות
No definitive compliance status was exposed by the accessible product and distributor excerpts. A comparison service references RoHS and REACH attributes, but it does not state their values. Verify the exact ordering entry and manufacturer compliance documentation before release.