Texas Instruments

TUSB320RWBR - USB Type-C CC Controller | Texas Instruments

MPN: TUSB320RWBR ✓ فعال
3 A Id 12-X2QFN, 1.6 mm x 1.6 mm Package
MOQ: 1 |

TUSB320RWBR جائزہ

Texas Instruments TUSB320RWBR is a USB Type-C configuration channel logic and port-control IC supporting USB Type-C specification 1.1, backward compatibility with specification 1.0, and current advertisement and detection up to 3 A. The device is offered in a 12-X2QFN surface-mount package measuring 1.6 mm by 1.6 mm. It handles configuration-channel attachment, cable-orientation detection, port-role detection, and Type-C current-mode selection.

A USB Type-C configuration channel controller is an interface IC within the USB Type-C port ecosystem. USB Type-C uses dedicated CC pins to negotiate cable attachment, orientation, port roles, and the available current level. This controller connects that negotiation to the port-management circuitry, allowing a USB-C port to operate as a source, sink, or dual-role port without implementing the entire USB Type-C protocol in system firmware.

The TUSB320 supports host-only DFP, device-only UFP, and dual-role DRP operating modes. It advertises default, medium, and high Type-C current modes, with support for current advertisement and detection up to 3 A. Backward compatibility with USB Type-C specification 1.0 is important when the port must interoperate with earlier implementations and accessories. Its compact 1.6 mm by 1.6 mm package supports space-constrained consumer and embedded systems.

Technically, the device separates low-speed Type-C port management from the data path. CC signaling determines which direction the inserted cable is connected and which party supplies power, while the USB data lanes remain the responsibility of a host, device, or dual-role controller. This division improves design flexibility because the same connector can be used with several USB controllers or protocol bridges when their electrical and logical interfaces are compatible.

Typical applications include laptop and tablet docking stations, smartphone and accessory charging designs, USB-C expansion adapters, industrial USB-C equipment, and embedded systems that require reversible connector orientation detection. It is also suitable for USB-C power-management designs where the system must identify sink or source behavior before enabling the appropriate power path.

Designers should verify the exact pin assignments, electrical limits, VBUS behavior, and configuration-channel implementation against the manufacturer datasheet. PCB layout must keep the compact package’s connections short, provide clean device grounding, and follow the manufacturer’s recommended decoupling arrangement. Because the controller coordinates port behavior rather than carrying high-speed USB data, its placement priority is deterministic power sequencing and signal integrity rather than USB differential-pair routing.

This product page consolidates the TUSB320RWBR specifications, verified manufacturer and distributor links, family alternatives, comparison parameters, and practical selection guidance. It is intended to help engineers determine whether the 12-X2QFN Type-C controller supports their required roles, current mode, package, and system-management architecture.

کے لیے ڈراپ اِن متبادل TUSB320RWBR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TUSB320RWBR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Texas Instruments
Package: X2QFN-12 (RWB) 1.6 mm x 1.6 mm
موازنہ کریں TUSB320RWBR →

TUSB320IRWBR

✅ ڈراپ-اِن
📦 12-X2QFN (1.6 x 1.6 mm)
Same TUSB320 Type-C controller family and 12-X2QFN footprint; suffix-specific electrical and qualification delta is not quantified in the comparison excerpt.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TUSB320LAIRWBR

✅ ڈراپ-اِن
Texas Instruments
📦 12-X2QFN (1.6 x 1.6 mm)
USB Type-C Configuration Channel Logic and Port Control · USB Type-C 1.1 (backward compatible with 1.0) · USB 2.0 (CC logic only, no USB-PD negotiation) · 2.7 V to 5 V · Default / 1.5 A / 3 A (USB Type-C) · Host Only (DFP), Device Only (UFP), Dual Role Port (DRP) · GPIO/strap (no I2C on 'L' variant) · -40 C to +85 C

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

TUSB320LIRWBR

✅ ڈراپ-اِن
📦 12-X2QFN (1.6 x 1.6 mm)
Same TUSB320 Type-C controller family and 12-X2QFN footprint; suffix-specific electrical and qualification delta is not quantified in the comparison excerpt.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TUSB320RWBR تفصیلات

Product Type USB Type-C configuration channel logic and port controller
Supported USB Type-C Specification USB Type-C specification 1.1
Backward Compatibility USB Type-C specification 1.0
Maximum Current Advertisement And Detection 3 A
Host-Only Port Mode DFP (source)
Device-Only Port Mode UFP (sink)
Dual-Role Port Mode DRP
Current Advertisement Modes Default, medium, and high modes
Channel Configuration Function CC (Configuration Channel)
Port Attachment Detection Supported
Cable Orientation Detection Supported
Port Role Detection Supported
پیکیج 12-X2QFN, 1.6 mm x 1.6 mm
ماؤنٹنگ ٹائپ Surface mount

TUSB320RWBR 12-x2qfn, 1.6 mm x 1.6 mm پن کنفیگریشن گائیڈ

TUSB320RWBR (12-x2qfn, 1.6 mm x 1.6 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

TUSB320RWBR کے لیے 12-x2qfn, 1.6 mm x 1.6 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TUSB320RWBR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

TUSB320RWBR کے لیے موزوں ہے 6 ایپلیکیشنs: USB-C Docking Stations, Laptop and Tablet Charging Ports, USB-C Expansion Adapters, Industrial USB-C Control Panels, USB-C Power-Path Management, Embedded USB-C Accessories.

🖥️

USB-C Docking Stations

The TUSB320RWBR fits USB-C docking-station front ends that must identify an attached cable, determine orientation, and negotiate the permitted Type-C current before enabling a power path. Its DFP, UFP, and DRP operating options support host, peripheral, or dual-role service connectors. Current advertisement and detection up to 3 A helps coordinate default, medium, and high power modes, although the dock’s power supply, source controller, and protection switches must independently support the selected level. The compact 1.6 mm by 1.6 mm 12-X2QFN package also leaves board area for downstream USB, display, storage, and networking interfaces.

📱

Laptop and Tablet Charging Ports

TUSB320RWBR can manage the USB-C connection in a compact charging port that must support reversible insertion and controlled power-role behavior. Orientation detection removes the need to infer cable direction from data-lane activity, while role detection supports source-only, sink-only, or dual-role product architectures. The 3 A advertisement-and-detection capability enables a system to request a higher Type-C current mode when its supply and thermal design permit. Designers should still coordinate VBUS switching, overvoltage protection, connector limits, and the host or peripheral controller so that a negotiated request always produces a safe power path.

🔧

USB-C Expansion Adapters

The TUSB320RWBR is applicable to small USB-C expansion adapters that need reliable attach, orientation, role, and current-mode handling without consuming excessive board area. The controller’s USB Type-C 1.1 support and compatibility with 1.0 accessories provide a practical baseline for adapter designs. A 12-X2QFN footprint allows the Type-C management section to sit close to the connector and reduces routing complexity around the receptacle. For multiport adapters, the designer must still implement separate CC lines or an appropriate muxing strategy and ensure the selected USB data controller matches the desired host, device, or dual-role behavior.

🏭

Industrial USB-C Control Panels

TUSB320RWBR can support USB-C service or maintenance connectors in industrial control equipment where reliable attachment and role negotiation are required. The controller handles configuration-channel logic while the product’s primary processor or programmable controller manages application data, enabling a physical connector to serve maintenance, configuration, or peripheral duties. Its compact package is useful in sealed or space-constrained control panels, while backward compatibility with USB Type-C 1.0 broadens the range of service cables that can be considered. Compliance for the finished industrial system must be assessed separately because the controller’s operating limits and qualification are not established by the product-page excerpt.

⚡

USB-C Power-Path Management

The TUSB320RWBR can provide Type-C negotiation signals for a power-path design that must distinguish source, sink, and dual-role behavior. Detecting cable orientation and the requested current mode before activating a switch reduces the chance of applying power in an unsuitable state. Support for Type-C current advertisement and detection up to 3 A allows the system to negotiate default, medium, or high operation, subject to the actual source and load capabilities. Firmware and hardware must coordinate the CC result with VBUS measurement, switch control, and fault handling; the controller itself should not be treated as the complete power-delivery solution.

🧩

Embedded USB-C Accessories

TUSB320RWBR fits embedded USB-C accessories that need automatic orientation handling and configurable port roles without using a large external microcontroller. A device-only design can use UFP behavior, while a product that sources power or supports both roles can use the available DFP or DRP modes. The 12-X2QFN package is particularly helpful in compact dongles, interface adapters, and control modules with limited connector clearance. Before finalizing the circuit, verify supply voltage, exposed-ground connections, CC pull or source behavior, and all operating limits in the manufacturer datasheet, because those details are required for a robust accessory implementation.

What is the TUSB320RWBR?
The TUSB320RWBR is a Texas Instruments USB Type-C configuration channel logic and port-control IC in a 12-X2QFN package. According to the manufacturer product page, it supports USB Type-C specification 1.1, is backward compatible with specification 1.0, and advertises or detects current up to 3 A. It handles configuration-channel attachment, cable orientation, port-role detection, and Type-C current-mode control.
What are the key specifications of TUSB320RWBR that engineers should know?
The TUSB320RWBR supports USB Type-C 1.1, remains backward compatible with USB Type-C 1.0, and provides configuration-channel, attachment, orientation, and role-detection functions. Its current advertisement and detection capability extends to 3 A. Texas Instruments packages the controller in a compact 12-X2QFN surface-mount package measuring 1.6 mm by 1.6 mm for space-constrained USB-C designs.
Can TUSB320RWBR operate as both a source and a sink?
Yes, the TUSB320RWBR supports host-only DFP, device-only UFP, and dual-role DRP operating modes. According to the Texas Instruments TUSB320 product page, this allows the controller to manage source, sink, or dual-role behavior. The appropriate mode must still match the system’s power-path and USB-controller architecture, and the selected port must satisfy the applicable Type-C current requirements.
Where to download the TUSB320RWBR datasheet PDF?
The official TUSB320RWBR datasheet can be obtained through the Texas Instruments TUSB320 product page at https://www.ti.com/product/TUSB320. The ordering information for TUSB320RWBR is also listed at https://www.ti.com/product/TUSB320/part-details/TUSB320RWBR. Use the manufacturer document for the authoritative pin descriptions, absolute-maximum ratings, timing values, and recommended application circuit.
Where can I find the TUSB320RWBR pinout?
The TUSB320RWBR pinout is defined in the Texas Instruments manufacturer datasheet for the TUSB320 family. The exact package is a 12-X2QFN measuring 1.6 mm by 1.6 mm. Use the datasheet pin-description table and land-pattern example when assigning tracks, particularly for CC, VBUS-related, ground, and configuration pins. A complete numbered pin map is not stated on the accessible product-page excerpt.
What USB Type-C specification does TUSB320RWBR support?
The TUSB320RWBR supports USB Type-C specification 1.1 and is backward compatible with USB Type-C specification 1.0. The Texas Instruments product information also identifies support for configuration-channel control, attach detection, cable-orientation detection, role detection, and default, medium, and high Type-C current modes. These functions establish the port-management behavior without replacing a high-speed USB data controller.
What is the maximum current supported by TUSB320RWBR?
The TUSB320RWBR supports Type-C current advertisement and detection up to 3 A. The manufacturer product page identifies default, medium, and high current-mode options as part of the supported port-control functions. Actual current delivery remains a system-level requirement: the power-path switch, voltage source, connector, cable, and thermal design must also support the selected operating current.
TUSB320RWBR vs TUSB320IRWBR - which is better for a new design?
TUSB320IRWBR is a closely related Texas Instruments TUSB320-family configuration that should be reviewed as a same-family alternative. Both address USB Type-C configuration-channel and port-control requirements, but the available comparison information does not quantify every ordering-code, qualification, or lifecycle difference. Check the manufacturer ordering table for the exact temperature grade, device status, and suffix-specific conditions before selecting either part.
What is the difference between TUSB320RWBR and TUSB320LAIRWBR?
TUSB320RWBR and TUSB320LAIRWBR are both identified as members of the Texas Instruments TUSB320 product family and are compared by part-search services. The available comparison excerpt does not expose the exact electrical or qualification delta. Review both ordering entries and their common family datasheet, then verify package, temperature range, status, and required Type-C behavior before treating either ordering code as a substitute.
When should I choose TUSB320RWBR over another TUSB320-family option?
Choose TUSB320RWBR when the design requires a compact Type-C configuration controller in the 12-X2QFN package and needs DFP, UFP, or DRP behavior plus current-mode control. The Texas Instruments family supports specification 1.1, backward compatibility with 1.0, and current advertisement or detection up to 3 A. Select another family ordering code only after confirming its suffix-specific qualification and availability requirements.
Is TUSB320RWBR suitable for a dual-role USB-C product?
The TUSB320RWBR is suitable for a dual-role design because its manufacturer product information lists DRP operation alongside host-only DFP and device-only UFP modes. It can support port-role detection, cable-orientation detection, attachment detection, and Type-C current-mode management. The surrounding USB protocol controller and power-source or sink path must also implement the behavior required by the finished product.
What can replace TUSB320RWBR?
The closest confirmed candidates are the same-family TUSB320IRWBR, TUSB320LAIRWBR, and TUSB320LIRWBR ordering codes. Their common Type-C role and package compatibility should be confirmed against the relevant ordering and datasheet information. No cross-brand pin-compatible replacement was established from the available manufacturer and comparison references, so a blanket second-source substitution should not be assumed.
Is TUSB320RWBR the same as TUSB320LIRWBR?
No, TUSB320RWBR and TUSB320LIRWBR are distinct ordering codes within the TUSB320 family. The available part-comparison information identifies them as related devices but does not provide enough detail to declare their electrical ratings, qualification levels, and lifecycle conditions identical. Review the manufacturer ordering table and inspect the device-status and suffix-specific entries for the exact production configuration.
Where can I buy TUSB320RWBR online?
Use the Request a Quote form on this page to request current TUSB320RWBR availability, minimum order quantity, packaging, and lead time. The form provides a direct quotation path without requiring you to rely on a static price. The manufacturer part-details page is https://www.ti.com/product/TUSB320/part-details/TUSB320RWBR and confirms the exact ordering code and product family.
What is the price of TUSB320RWBR?
The current TUSB320RWBR quotation is generated through the Request a Quote form on this page. Pricing depends on order quantity, package format, market conditions, and current inventory, so a static amount can become inaccurate. Submit the requested MPN and quantity on the quote form to receive the applicable commercial response and lead-time information.
What is the lead time for TUSB320RWBR and is it in stock?
Current TUSB320RWBR stock and lead time should be requested through the Request a Quote form on this page. The manufacturer lists TUSB320RWBR as an ordering option, but that alone does not establish warehouse quantity or a shipment date. Include the required quantity, package preference, and target delivery location so the quotation can reflect the correct supply conditions.

کے لیے انجینئرنگ ریفرنس ڈیٹا TUSB320RWBR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose TUSB320RWBR for a compact USB Type-C port that requires configuration-channel control, attachment detection, orientation detection, role detection, and support for DFP, UFP, or DRP operation. Its documented USB Type-C 1.1 compatibility, backward compatibility with 1.0, and current advertisement and detection up to 3 A make it suitable for docks, charging adapters, industrial equipment, and embedded accessories. TUSB320IRWBR, TUSB320LAIRWBR, and TUSB320LIRWBR are same-family alternatives in the common 12-X2QFN footprint, but their suffix-specific temperature, qualification, status, and lifecycle conditions require confirmation before substitution. No cross-brand drop-in replacement was established from the available manufacturer and comparison references. The surrounding design must also provide a compatible USB data controller, correct VBUS and power-path architecture, suitable connector and cable components, and the manufacturer’s recommended layout.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ TUSB320IRWBR TUSB320LAIRWBR TUSB320LIRWBR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 12-X2QFN (1.6 x 1.6 mm) 12-X2QFN (1.6 x 1.6 mm) 12-X2QFN (1.6 x 1.6 mm) 12-X2QFN (1.6 x 1.6 mm)
Product Type USB Type-C configuration channel logic and port controller TUSB320-family USB Type-C controller TUSB320-family USB Type-C controller TUSB320-family USB Type-C controller
Attach, Orientation, And Role Detection Supported TUSB320-family port-management functions TUSB320-family port-management functions TUSB320-family port-management functions

اہم امتیازی خصوصیات

  • Compact Type-C port-management footprint (بمقابلہTUSB320IRWBR)
  • Defined USB Type-C version coverage (بمقابلہTUSB320LAIRWBR)
  • Explicit three-port-role support (بمقابلہTUSB320LIRWBR)

ڈیزائن نوٹس

Place the TUSB320RWBR and its required support components close to the USB-C connector, keeping configuration-channel and VBUS-related routing short and away from noisy power-conversion stages. The 12-X2QFN package requires careful fanout from a 1.6 mm by 1.6 mm land pattern. Follow the manufacturer layout example for exposed-pad, ground, and component-placement details rather than generalizing from another QFN device.

Separate CC negotiation from power delivery. The controller can advertise and detect Type-C current up to 3 A, but the source, sink, VBUS switch, protection devices, connector, and cable must support the selected operating level. Add fault handling for VBUS overvoltage, reversed or invalid cable conditions, and failed power-path switching so that a configuration result cannot directly energize an unsafe load.

Do not treat TUSB320RWBR as a high-speed USB data controller. It manages configuration-channel signaling, attachment, orientation, role, and current mode, while USB data lanes remain connected to a separate host, device, or dual-role controller. Verify that software state transitions match the electrical role and that the CC implementation follows the manufacturer recommendation for the selected DFP, UFP, or DRP architecture.

Use a stable reference and ground strategy around the compact package, and observe the manufacturer’s recommended decoupling and exposed-pad connection instructions. Check the final assembly for adequate solder-joint access and verify the package drawing rather than relying only on the 1.6 mm by 1.6 mm body dimension. Pin numbering, pad geometry, and thermal construction must come from the exact TUSB320RWBR package drawing.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No definitive compliance status was exposed by the accessible product and distributor excerpts. A comparison service references RoHS and REACH attributes, but it does not state their values. Verify the exact ordering entry and manufacturer compliance documentation before release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

TUSB320RWBR datasheet TUSB320RWBR datasheet pdf TUSB320RWBR pinout TUSB320RWBR specifications Texas Instruments TUSB320RWBR TUSB320RWBR price TUSB320RWBR stock TUSB320RWBR equivalent TUSB320RWBR replacement TUSB320RWBR vs TUSB320IRWBR TUSB320RWBR 12-X2QFN TUSB320RWBR USB Type-C controller TUSB320 3 A configuration channel TUSB320RWBR USB-C application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments TUSB320RWBR TUSB320IRWBR TUSB320LAIRWBR TUSB320LIRWBR USB Type-C USB Type-C specification 1.1 USB Type-C specification 1.0 Configuration Channel CC USB interface IC Type-C port controller Dual Role Port DFP UFP DRP current advertisement current detection 3 A cable orientation detection port role detection 12-X2QFN QFN surface-mount semiconductor VBUS USB-C docking station USB-C charging RoHS REACH
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں