Nuvoton Technology Corporation

W78E054B40FL - 8-Bit 40MHz 16KB Flash MCU | Nuvoton

MPN: W78E054B40FL ✗ סוף ייצור
44-pin BQFP Package 40 MHz Speed 16KB (16K x 8) Flash Memory
כמות הזמנה מינימלית: 1 |

W78E054B40FL סקירה

The Nuvoton Technology Corporation W78E054B40FL is an 8-bit W78 series microcontroller with a 40 MHz maximum operating frequency, 16KB (16K x 8) Flash program memory, and 36 I/O pins in a 44-pin BQFP package. The device is based on the 8051 instruction-set architecture and is intended for embedded control applications requiring deterministic peripheral integration and modest code storage.

An 8051 microcontroller is an embedded processor category designed around a compact instruction set, integrated memory, timers, serial interfaces, and general-purpose I/O. The W78 series extends the classic 8051 architecture with an integrated Flash program memory implementation. These devices occupy the MCU hierarchy between general-purpose microprocessors and simpler fixed-function logic, making them useful for appliance controls, small industrial systems, access equipment, and compact embedded products.

The W78E054B40FL combines 16KB of Flash program memory with 256 bytes of RAM. Its 36 available I/O lines provide interface capacity for sensors, switches, displays, actuators, and external control logic. The 40 MHz operating capability supports faster instruction execution than lower-frequency 8051 derivatives, while the 44-BQFP package exposes enough pins for parallel control and multiple peripheral connections.

The part belongs to the W78E family and uses an 8051-compatible core with integrated Flash memory. Its operating architecture is intended for small embedded control systems where deterministic behavior, compact software, and a moderate peripheral set are more important than a high-performance CPU core or large application-memory footprint. Its 256-byte RAM limits complex buffering and encourages designs to use external memory only when the application genuinely requires it.

Typical uses include appliance and equipment controllers, small motor or relay control panels, sequential industrial modules, instrumentation interfaces, and compact 8-bit embedded platforms. The 36 I/O pins make the device practical for systems combining digital inputs, output control, communication signaling, and status indication without requiring a larger package.

Designers should verify oscillator, reset, timing, and interrupt assignments against the manufacturer datasheet before laying out the PCB. Because the 8051 architecture is memory-constrained, firmware should avoid unnecessary library overhead and preserve stack space for interrupt service routines. The 44-pin BQFP footprint also requires adequate clearance for fine-pitch routing and careful assembly inspection.

This product page consolidates the confirmed architecture, memory, speed, pin-count, package, lifecycle, sourcing, and cross-reference information for the W78E054B40FL. It also highlights the engineering constraints engineers should evaluate when planning a replacement, including memory capacity, timing, package compatibility, pin behavior, firmware dependencies, and legacy-production risk.

חלופות תחליף ישיר עבור W78E054B40FL — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

W78E054B40FL דירוגים מרביים ומאפיינים חשמליים

Microcontroller Type 8-bit 8051 W78 microcontroller
Maximum CPU Frequency 40 MHz
Program Memory Size 16KB (16K x 8) Flash
RAM Size 256 bytes (256 x 8)
Number of I/O Pins 36 pins
מארז 44-pin BQFP
Instruction Set Architecture 8051
Series W78 series
סוג הרכבה Surface mount

מדריך תצורת פינים של W78E054B40FL 44-pin bqfp

תצורת פינים עבור W78E054B40FL (מארזת 44-pin bqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 44-pin bqfp עבור W78E054B40FL

אין נתוני פריסת פינים מפורטים עבור W78E054B40FL.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

W78E054B40FL מתאים עבור 6 יישוםs: Legacy Equipment Controllers, Appliance and Household Device Control, Small Motor and Relay Control, Instrumentation and Data Acquisition Front Ends, Access and Security Control Modules, Communication and Protocol Concentrators.

🏭

Legacy Equipment Controllers

The W78E054B40FL fits legacy equipment controllers that retain an 8051 software base and require the original 44-pin BQFP interface. Its 40 MHz operating capability supports responsive control logic, while 16KB of Flash provides space for startup routines, state machines, parameter tables, and communication handlers. The 36 I/O lines can supervise switches, alarm signals, relay outputs, and status indicators. Because the device is obsolete, engineers should preserve its memory map, interrupt structure, and peripheral configuration when maintaining installed platforms, and confirm availability, traceability, and temperature requirements before committing a design to continued production.

🔧

Appliance and Household Device Control

The W78E054B40FL can manage compact appliance functions where a deterministic 8-bit controller is preferable to a higher-power processor. Its 36 I/O lines support buttons, mode indicators, display segments, sensors, and actuator commands, while 16KB of Flash accommodates a focused state machine rather than a large operating system. The 40 MHz clock rate provides execution margin for scanning inputs, updating displays, and coordinating timing. For connected appliances, the MCU can serve as a local controller while external circuitry handles network connectivity. Firmware planning should account for the 256-byte RAM limit and minimize interrupt-time operations and deep call chains.

⚡

Small Motor and Relay Control

The W78E054B40FL is applicable to compact relay, solenoid, and small-motor control modules where deterministic sequencing and ample I/O are more important than complex computation. Its 36 I/O lines can distribute digital input sensing and control outputs across the board, while 40 MHz operation supports timely task execution. The 8051 core is familiar in established control codebases, reducing migration effort when maintaining a mature machine. Designers must use the manufacturer datasheet to confirm whether each required timer, PWM, and capture function is present, and they must add suitable driver, protection, and isolation circuits for inductive loads.

📺

Instrumentation and Data Acquisition Front Ends

The W78E054B40FL can serve as the supervisory controller in a compact instrumentation front end that multiplexes sensors, controls measurement sequencing, and converts results into local display or communications output. Its 16KB Flash capacity suits bounded acquisition routines and configuration data, and its 36 I/O lines can interface with external amplifiers, converters, and digital sensors. The 256-byte RAM requires streaming or periodic processing rather than retaining large sample buffers. Designers should confirm the available analog and serial peripherals in the datasheet, maintain careful grounding between analog and digital sections, and provide filtering appropriate to the measured signal bandwidth.

🔐

Access and Security Control Modules

The W78E054B40FL is suitable for compact access-control modules that supervise credential inputs, indicator outputs, lock or relay commands, and local event handling. The 36 I/O lines provide sufficient parallel connectivity for keys, status LEDs, alarm signals, and door-control elements, while 16KB of Flash supports a fixed control program and parameter tables. The 8051 architecture remains practical where firmware is already established and deterministic timing is required. Security deployments should add appropriate credential validation and communication isolation rather than treating the MCU alone as a cryptographic boundary. For new installations, a currently supported MCU with greater memory may simplify long-term maintenance.

🌐

Communication and Protocol Concentrators

The W78E054B40FL can support a small protocol-concentrator or interface bridge when the required traffic remains modest and the system prioritizes deterministic 8-bit processing. Its 40 MHz clock rate handles protocol timing, status tracking, and routing between serial interfaces, while the 36 I/O lines provide handshake and status signals around external interface components. The 16KB Flash footprint is suitable for compact protocol stacks and fixed configuration tables, although the 256-byte RAM limits buffering depth. Engineers should verify the exact UART, timer, and interrupt resources in the manufacturer datasheet, validate bus timing under worst-case interrupt load, and isolate external communication lines where needed.

What is the W78E054B40FL?
The W78E054B40FL is an 8-bit Nuvoton W78 series microcontroller based on the 8051 architecture. It operates at up to 40 MHz, contains 16KB (16K x 8) of Flash program memory and 256 bytes of RAM, provides 36 I/O pins, and is packaged in a 44-pin BQFP. According to the manufacturer datasheet and product listings, these characteristics position it for compact embedded-control systems.
What are the key specifications of W78E054B40FL that engineers should know?
The principal W78E054B40FL specifications are an 8-bit 8051 core, 40 MHz maximum operating frequency, 16KB of Flash program memory, 256 bytes of RAM, 36 I/O pins, and a 44-pin BQFP package. The manufacturer datasheet is the controlling reference for operating voltage, peripheral configuration, reset behavior, timing, and absolute maximum ratings because those details are not summarized by the product listing.
How much memory does the W78E054B40FL have?
The W78E054B40FL has 16KB (16K x 8) of Flash program memory and 256 bytes of RAM. This memory footprint is suitable for compact 8-bit firmware, control tables, state machines, and communication routines. The manufacturer datasheet should be consulted for the program-memory organization, RAM addressing, and code-development restrictions associated with the 8051 architecture.
What is the operating frequency of W78E054B40FL?
The W78E054B40FL supports a maximum operating frequency of 40 MHz. The 40 MHz figure identifies the CPU clocking capability of this 8051-based W78 device. Exact clock-source requirements, oscillator accuracy limits, reset timing, and low-power behavior must be implemented according to the manufacturer datasheet rather than inferred solely from the headline frequency.
What package and pin count does the W78E054B40FL use?
The W78E054B40FL is offered in a 44-pin BQFP package with 36 I/O pins. The manufacturer datasheet pin-description table should be used when assigning tracks to power, ground, reset, clock, programming, and general-purpose I/O functions. Because the package has 44 physical positions but only 36 listed I/O pins, the remaining positions are dedicated to supply, control, or other package-specific functions.
Where can I download the W78E054B40FL datasheet PDF?
The W78E054B40FL datasheet PDF is available through the Winbond datasheet archive listed on this page and through linked component records. Download the document identified as W78E054B40FL and use its ordering-information, pin-description, electrical-characteristics, memory-map, clock, and timing tables for design verification. The archived datasheet describes an 8-bit microcontroller and should be treated as the authority for revisions and package details.
Where can I find the W78E054B40FL pinout?
The W78E054B40FL pinout is found in the pin-description section and package drawing of the manufacturer datasheet. It is a 44-pin BQFP device with 36 I/O pins, so engineers should not assume every physical pin is user I/O. Use the datasheet's numbered pin table and 44-BQFP drawing to identify power, ground, clock, reset, programming, and no-connect assignments before PCB routing.
What is the best drop-in replacement for W78E054B40FL?
No confirmed drop-in replacement for the W78E054B40FL was identified in the available cross-reference results. A valid replacement must match the 44-pin BQFP footprint and remain pin-to-pin compatible while preserving the 40 MHz, 16KB Flash, 256-byte RAM, and 8051 firmware requirements. Use the Request a Quote form on this page to request sourcing and engineering review of an obsolete-part replacement.
Can another W78E054B40FL-compatible device replace it without PCB changes?
A device can replace the W78E054B40FL without PCB changes only if its land pattern, pin assignments, supply requirements, clock configuration, reset behavior, memory organization, peripherals, and firmware execution are verified as compatible. The available cross-reference searches did not identify a confirmed equivalent, so an engineer should request a controlled device migration review rather than assume that a generic 8-bit MCU is interchangeable.
When should I choose the W78E054B40FL over another 8-bit MCU?
Choose the W78E054B40FL when an existing 8051-based design specifically targets its 44-pin BQFP footprint, 40 MHz clocking, 16KB Flash organization, and 256-byte RAM. It is primarily relevant for maintaining or reproducing legacy equipment because the part is obsolete and requires careful sourcing. For a new design, a currently supported MCU may offer a longer supply horizon and more memory.
Is the W78E054B40FL suitable for industrial control applications?
The W78E054B40FL can be suitable for compact embedded-control tasks that fit an 8-bit 8051 core, 16KB of program memory, 256 bytes of RAM, and 36 I/O lines. Its use in an industrial product also depends on the required operating-temperature range, EMC performance, supply availability, and product-specific qualification. Those suitability conditions must be checked against the manufacturer datasheet.
Where can I buy the W78E054B40FL online?
The W78E054B40FL is listed as obsolete by an aggregated component record, although other listings still show inventory. Use the Request a Quote form on this page to request the current part condition, authorized sourcing options, minimum order quantity, and delivery estimate for the exact 44-pin BQFP ordering code. Confirm authenticity and traceability before accepting any proposed supply.
What is the price of the W78E054B40FL?
Current unit pricing is not published in the available product records, and no explicit quantity-break table was captured for this exact MPN. Use the Request a Quote form on this page to request current pricing for the exact W78E054B40FL ordering code, proposed quantities, and delivery requirements. This avoids relying on stale market figures or confusing other package or suffix variants with the requested device.
What is the lead time for the W78E054B40FL?
The current manufacturer lead time for the obsolete W78E054B40FL cannot be stated from the available product records. Use the Request a Quote form on this page to request the current lead time, minimum order quantity, and available stock for the exact MPN. Because lifecycle status is obsolete, include the machine quantity, target date, and any traceability requirements in the request.
Is the W78E054B40FL in stock?
Inventory is reported by multiple listings, but no dependable current stock quantity or manufacturer allocation is established. Use the Request a Quote form on this page to request live availability for the exact W78E054B40FL, including pack quantity, date code, traceability, and estimated delivery. Treat any displayed third-party inventory as provisional until the supply is confirmed.
How does the W78E054B40FL compare with a current 8-bit MCU?
The W78E054B40FL differs from a current 8-bit MCU primarily in lifecycle risk and product maturity: it is identified as obsolete, while current devices normally offer longer availability and broader ecosystem support. Its confirmed strengths are a 40 MHz 8051 core, 16KB Flash, 256 bytes of RAM, 36 I/O pins, and a 44-pin BQFP footprint. A migration should compare peripheral mapping, memory, timing, package, toolchain, and certification requirements.

נתוני עזר הנדסיים עבור W78E054B40FL — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the W78E054B40FL when maintaining or reproducing equipment that already depends on its 8051 core, 40 MHz timing, 16KB Flash organization, 256-byte RAM, 36 I/O lines, and 44-pin BQFP footprint. These requirements are particularly important for legacy industrial, appliance, access-control, and instrumentation platforms where redesigning the controller would be more disruptive than sourcing an obsolete part. Do not select it for a new design without reviewing lifecycle exposure, software-tool support, temperature limits, and long-term supply. No confirmed drop-in alternative was established by the available cross-reference records, so replacement should be treated as an engineering migration rather than a simple ordering substitution. Any candidate must prove package, pin, clock, reset, memory, peripheral, and firmware compatibility before PCB release.

השוואה עם חלופות

פרמטר מוצר זה
Brand Nuvoton Technology Corporation
Package 44-pin BQFP
CPU Architecture 8-bit 8051
Maximum CPU Frequency 40 MHz
Program Memory 16KB (16K x 8) Flash
RAM 256 bytes (256 x 8)
I/O Pin Count 36 pins
Lifecycle Status Obsolete

מבדילים עיקריים

  • Defined legacy 8051 control platform (לעומתNo confirmed drop-in alternative)
  • High I/O availability within a 44-pin package (לעומתNo confirmed drop-in alternative)
  • On-chip Flash program memory (לעומתNo confirmed drop-in alternative)

הערות תכנון

Do not treat every one of the 44 physical BQFP positions as a general-purpose I/O. The device has 36 listed I/O pins, so the remaining positions serve power, ground, clock, reset, programming, or other dedicated functions. Assign PCB connections from the manufacturer pin-description table, confirm each signal's direction and electrical limits, and preserve the original land pattern when replacing an obsolete assembly.

Route the 44-BQFP footprint as a controlled, fine-pitch assembly and avoid long copper stubs beneath the device. Keep clock and reset traces short, provide a clean local return path, and place required bypass capacitors at the supply pins using the datasheet reference layout. Because obsolete parts may have uncertain sourcing provenance, inspection criteria should include solderability, pin condition, marking consistency, and traceability.

Design the supply path around the manufacturer's operating and absolute-maximum voltage limits rather than around the 40 MHz clock rating alone. Use separate routing for sensitive signals, account for startup and reset behavior, and verify that power-supply transients remain within the specified limits. If the original equipment uses a nonstandard clock or reset network, preserve and validate that configuration during any drop-in sourcing review.

The 256-byte RAM is the principal firmware constraint. Avoid deep recursion, large local buffers, and blocking communication routines that can overrun memory during interrupts. Place frequently used data in the limited RAM region, measure worst-case stack depth, and keep time-critical handlers short. A replacement should be checked for equivalent RAM addressing and code-generation behavior, not merely for matching Flash capacity.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit compliance declaration for this exact MPN appears in the available product records. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the current manufacturer or authorized supply channel before environmental or regulatory use.

חיפושים קשורים

W78E054B40FL datasheet W78E054B40FL datasheet pdf W78E054B40FL pinout W78E054B40FL specifications Nuvoton W78E054B40FL W78E054B40FL 40MHz 16KB flash W78E054B40FL 44-BQFP W78E054B40FL equivalent W78E054B40FL replacement W78E054B40FL cross reference W78E054B40FL obsolete W78E054B40FL buy

רכיבים ומונחים קשורים

Nuvoton Technology Corporation Winbond W78E054B40FL W78 series 8051 8-bit microcontroller embedded microcontroller microcontroller semiconductor 16KB Flash memory 256-byte RAM 40 MHz 36 I/O pins 44-pin BQFP surface-mount package embedded control legacy equipment appliance control instrumentation access control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר