WM1811AECS/R - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM1811AECS/R ✓ פעילWM1811AECS/R סקירה
An audio codec combines signal conversion and digital audio-interface functions within one integrated circuit. The codec hierarchy begins with the ADC and DAC converters, continues through the stereo audio codec, and extends into the broader category of audio interface ICs used for digital signal conversion and device-to-device audio communication. Integrating these functions reduces the number of external audio components required in portable equipment.
The WM1811A family is designed for low-power, high-fidelity portable audio. Its stereo signal path supports 24-bit I2S and PCM digital audio, while the integrated speaker and headphone drivers reduce the need for separate output-driver devices. The manufacturer describes the part as requiring two voltage supplies, with other internal supply rails generated by integrated low-dropout regulators. This architecture supports compact layouts where component count, board area, and power-management complexity are important.
The WM1811AECS/R combines analog stereo capture and playback in a package measuring 4.16 mm by 3.88 mm. Its integrated Class D speaker driver and Class W headphone driver are intended to reduce external circuitry and simplify portable-device signal chains. The 80-WCSP format requires a dense, high-density PCB layout and careful component placement to maintain short analog and digital return paths.
Typical uses include smartphone call and media processing, portable media players, connected personal-audio equipment, and compact multimedia systems. A smartphone implementation can route microphone signals through the stereo ADCs, exchange PCM or I2S audio with an application processor, and use the integrated playback drivers for speaker or headphone output. The codec architecture is particularly useful where a conventional discrete ADC, DAC, and output-driver chain would consume excessive board area.
Designers should treat microphone, headphone, speaker, digital-interface, and power connections as separate high-value signal paths. Place passive components adjacent to their associated balls, use short ground returns, and verify that the board layout preserves clean analog performance and correct class-D output behavior. Before release, compare the selected PCB footprint, ball assignments, supply requirements, and acoustic test conditions against the manufacturer datasheet.
This page consolidates the known WM1811AECS/R device description, package information, application guidance, pin-access notes, and drop-in replacement assessment. It also distinguishes a verified same-family alternative from the many general audio codecs that use incompatible packages or interfaces, helping engineers avoid substitutions that require PCB redesign.
חלופות תחליף ישיר עבור WM1811AECS/R — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם WM1811AECS/R (אותו גורם צורה וטביעת רגל) — שונים ב Digital Audio Interfaces, Mounting Type.
WM1811GECS/R
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←WM1811AECS/R דירוגים מרביים ומאפיינים חשמליים
| Product Type | Stereo audio codec |
| Manufacturer | Cirrus Logic |
| Audio Resolution | 24 bit |
| Digital Audio Interfaces | I2S and PCM |
| Analog-to-Digital Converters | 2 |
| Digital-to-Analog Converters | 2 |
| Integrated Speaker Driver | Stereo Class D |
| Integrated Headphone Driver | Class W |
| External Supply Count | 2 |
| Internal Supply Generation | Integrated LDOs |
| מארז | 80-ball WCSP |
| Package Dimensions | 4.16 mm x 3.88 mm |
| מספר פינים | 80 balls |
| סוג הרכבה | Surface mount |
| Primary Application | Smartphones and portable multimedia devices |
מדריך תצורת פינים של WM1811AECS/R 4.16 mm x 3.88 mm
תצורת פינים עבור WM1811AECS/R (מארזת 4.16 mm x 3.88 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור WM1811AECS/R.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
WM1811AECS/R מתאים עבור 6 יישוםs: Smartphone Voice and Media Processing, Portable Media Player, Connected Personal Audio, Compact Tablet Audio Front End, Industrial Voice Terminal, Portable Gaming Audio Module.
Smartphone Voice and Media Processing
The WM1811AECS/R fits smartphones that need integrated stereo capture, digital audio transfer, and low-power playback in a compact board area. Its 24-bit I2S or PCM interface connects to an application processor, while two ADC channels support analog microphone acquisition and two DAC channels handle digital playback. The integrated Class D speaker driver and Class W headphone driver further reduce the number of external audio devices. In a compact handset, the 4.16 mm by 3.88 mm 80-ball WCSP helps preserve routing space, although its dense footprint requires careful assembly planning and ball-level layout review.
מומלץ
Portable Media Player
The WM1811AECS/R is appropriate for portable media players requiring a consolidated headphone and speaker audio path. Two ADC channels support line or microphone input, and the 24-bit I2S or PCM digital interface can carry full-resolution audio to a host processor. Integrated Class W headphone and Class D speaker drive eliminate separate output stages from the basic signal chain, which is valuable in a battery-powered enclosure. The implementation should still budget for load, output filtering, thermal rise, and the device’s two external supply requirements before finalizing the power architecture.
מומלץ
Connected Personal Audio
The WM1811AECS/R supports connected personal-audio products that combine digital media playback with analog voice capture. An I2S or PCM link provides a direct digital-audio connection to a Bluetooth, network, or application-processing subsystem, while the stereo converters and integrated headphone driver reduce external analog routing. The Class D speaker path is useful for compact products that need efficient playback from a restricted internal volume. For a wearable or accessory design, verify acoustic output limits, microphone biasing, supply sequencing, and heat dissipation under sustained playback because the package is optimized for density rather than unrestricted power dissipation.
מומלץ
Compact Tablet Audio Front End
The WM1811AECS/R can serve as the local audio front end in a compact tablet or multimedia module when a single codec must handle microphone capture, headphone playback, and speaker output. The 24-bit I2S or PCM interface provides a flexible digital connection to a system processor, and the integrated Class D and Class W outputs simplify analog output planning. Its small 80-ball WCSP is advantageous where board area is constrained. The high-density footprint makes assembly yield, exposed-ball requirements, and placement of microphone and output components central considerations, so prototype layouts should be reviewed against the manufacturer land pattern.
מומלץ
Industrial Voice Terminal
The WM1811AECS/R can support a compact voice terminal that accepts analog microphone input, processes audio digitally, and provides headphone or small-speaker playback. The two ADC and two DAC channels offer a symmetric stereo route, while I2S or PCM supports connection to a digital signal processor or network controller. Integrated output drivers reduce board-area requirements compared with a discrete codec and amplifier arrangement. An industrial enclosure should still address acoustic echo, microphone grounding, supply integrity, and operating-temperature requirements, while the layout should maintain separation between capture, playback, and digital return paths.
מומלץ
Portable Gaming Audio Module
The WM1811AECS/R is suitable for a portable gaming-audio module combining digital game audio, microphone communication, headphone output, and speaker playback. Its 24-bit I2S or PCM interface allows low-latency digital audio transfer from a host device, and the integrated Class W headphone driver simplifies the common headset-output path. The Class D speaker driver can support a compact internal transducer when its load and thermal limits are respected. Since gaming devices emphasize low latency and dynamic range, system validation should include clock synchronization, microphone-to-playback echo behavior, output filtering, and sustained-playback temperature measurements.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור WM1811AECS/R — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | WM1811GECS/R |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 80-ball WCSP (4.16 mm x 3.88 mm) | 80-ball WCSP (4.16 mm x 3.88 mm) |
| Product Type | Stereo audio codec | Stereo audio codec |
מבדילים עיקריים
- Combines stereo conversion and output-drive functions in one compact package (לעומתWM1811GECS/R)
- Supports two principal digital-audio formats (לעומתWM1811GECS/R)
- Reduces external power-conversion complexity (לעומתWM1811GECS/R)
הערות תכנון
Use the manufacturer’s 80-ball WCSP land pattern and assembly process requirements without changing ball spacing, pad geometry, or solder-mask definitions. Place input, output, and supply bypass components directly beside their associated balls to minimize loop area. The 4.16 mm by 3.88 mm package leaves little room for long escape routing, so establish ball assignments from the final schematic before locking the component-placement grid.
Keep the microphone input, headphone output, and speaker-output paths away from switching-regulator nodes and high-speed digital returns. Use a continuous ground reference beneath and around the codec where the layout rules permit, and route I2S or PCM clock and data as a compact, matched group. A clear return-current path is especially important because the package integrates sensitive analog converters with digital interfaces and powerful output drivers.
Plan the two external supply rails around the manufacturer’s voltage and current limits, and confirm startup sequencing for every rail. The codec generates additional internal rails with integrated LDOs, but those internal rails do not remove the need for clean external supplies. Check the maximum input voltage, current drawn during startup and full-scale playback, and the load presented by the Class D and Class W outputs before selecting regulators.
Do not treat every codec with a similar audio feature set as a drop-in replacement. The package ball map, supply pins, clock interface, I2S/PCM signal mapping, analog pins, and output-driver connections must match, and electrical limits must also be acceptable. WM1811GECS/R is the closest same-family candidate, but its exact ordering-code differences should be resolved against the manufacturer documentation before production use.
מידע על תאימות
No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the cited product information. The part is an audio codec intended for portable consumer electronics rather than an identified automotive-qualified device.