XC7K325T-1FFG900CES - 326080-Cell Kintex-7 FPGA | AMD
MPN: XC7K325T-1FFG900CES ✓ פעילXC7K325T-1FFG900CES סקירה
A field-programmable gate array is a semiconductor whose digital behavior is defined after manufacture by loading a configuration bitstream. Within the semiconductor hierarchy, an FPGA combines programmable logic blocks, block RAM, digital signal processing slices, programmable input/output resources, and dedicated clocking and high-speed transceiver circuitry. This integration allows a single FPGA to implement an entire embedded subsystem, including parallel algorithms, control logic, memory interfaces, and connectivity.
The Kintex-7 family targets demanding communications, defense, industrial, test, and signal-processing systems. This device provides 25,475 configurable logic blocks, a clock figure of 1098 MHz, and 16 high-speed transceivers according to family listings. The 900-ball FCBGA footprint provides 500 I/O, which supports dense board-level designs and high pin counts for external memory, clocks, serial links, and parallel interfaces. The ES ordering suffix distinguishes this configuration from the commercial-temperature ordering used in related XC7K325T variants.
Compared with smaller Kintex-7 devices, the XC7K325T offers substantially more logic, memory, and I/O capacity while remaining in the same established FPGA architecture. The -1 grade provides a balanced performance point below the -2 and -3 grades for designs that require substantial compute density without selecting the fastest, highest-cost speed grade. Dedicated resources support parallel arithmetic, deep buffering, and high-speed serial communication, although final channel ratings depend on the selected transceiver configuration and device state.
Typical uses include high-throughput digital signal processing, video and image processing, industrial control, radar and communications infrastructure, network equipment, and hardware accelerators. The 500-I/O count is especially useful when an application must connect multiple external memory devices, high-speed capture logic, clock sources, and communication channels within a single board.
A critical design consideration is that FPGA migration is rarely a simple name substitution. Place constraints, pin definitions, configuration memories, power planning, transceiver configuration, and timing results must be verified for the exact ordering code. Use the Kintex-7 package pinout files and UG475 when assigning PCB tracks and review device-specific bitstream and speed-grade requirements before release.
חלופות תחליף ישיר עבור XC7K325T-1FFG900CES — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XC7K325T-1FFG900CES (אותו גורם צורה וטביעת רגל) — שונים ב Package, Process Technology, Speed Grade, Core Voltage (VCCINT), Programmable Logic Cells.
XC7K325T-1FFG900C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K325T-1FFG900I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XC7K325T-2FFG900C
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XC7K325T-2FFG900I
✅ Drop-In✓ במלאי
$65 / יחידה
הצג גיליון נתונים ←XC7K325T-2FFG900CES
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7K325T-1FFG900CES דירוגים מרביים ומאפיינים חשמליים
| Device Type | Kintex-7 Field Programmable Gate Array (FPGA) |
| Programmable Logic Cells | 326080 cells |
| Configurable Logic Blocks | 25475 CLBs |
| Internal Memory | 16404480 bits |
| User I/O | 500 I/O |
| Maximum Clock Figure | 1098 MHz |
| High-Speed Transceivers | 16 transceivers |
| Speed Grade | -1 |
| מארז | 900-BBGA FCBGA, FFG900 |
| Ball Count | 900 balls |
| Programmable Logic Type | CMOS FPGA |
| סוג הרכבה | Surface mount |
| Series | Kintex-7 |
| Configuration | FPGA configuration bitstream |
| Logic Resources | Programmable logic, block RAM, DSP, I/O, clocking, and GTX transceiver resources |
| Package Pinout Reference | Kintex-7 package device pinout files and UG475 |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
מדריך תצורת פינים של XC7K325T-1FFG900CES kintex-7 package device pinout files and ug475
תצורת פינים עבור XC7K325T-1FFG900CES (מארזת kintex-7 package device pinout files and ug475). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XC7K325T-1FFG900CES.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XC7K325T-1FFG900CES מתאים עבור 6 יישוםs: High-Performance Digital Signal Processing, Communications and Network Infrastructure, Industrial Control and Acquisition Systems, Video and Image Processing Pipelines, Aerospace and Defense Processing, Test and Instrumentation Systems.
High-Performance Digital Signal Processing
The XC7K325T-1FFG900CES suits parallel filtering, FFT, correlation, and fixed-point arithmetic pipelines that need substantial programmable logic rather than a small accelerator. Its 326,080 programmable logic cells, 25,475 configurable logic blocks, and 16,404,480 bits of block RAM allow multiple processing lanes and line buffers to coexist on one device. The -1 speed grade provides predictable timing for sustained parallel operations, while the 500-I/O FFG900 package supports parallel capture, high-speed memory, and control interfaces. Engineers should pipeline the design around the implemented -1 timing limits and verify utilization, power, and thermal margin in Vivado.
מומלץ
Communications and Network Infrastructure
The device is appropriate for high-throughput line-card, aggregation, and protocol-processing functions where programmable logic and serial connectivity must coexist. Sixteen dedicated GTX transceivers support multi-lane serial designs, while 326,080 logic cells provide capacity for framing, rate conversion, buffers, and control logic. The 500 user I/O provide connections to external transceivers, network processors, and system memories. Implementation should account for reference-clock quality, channel placement, transceiver pin constraints, and the link-rate limits of the selected Kintex-7 configuration rather than treating every I/O as a high-speed serial interface.
מומלץ
Industrial Control and Acquisition Systems
A 500-I/O Kintex-7 FPGA can consolidate simultaneous sensor acquisition, timing control, data conditioning, and machine-control logic in one device. The XC7K325T-1FFG900CES provides ample programmable logic for parallel ADC interfaces and real-time control, while block RAM supports channel buffering and protocol state machines. The ES ordering class should be matched to the equipment's ambient and enclosure temperature requirements. Because a 900-ball FCBGA demands careful escape routing and thermal design, use the AMD package data to verify signal integrity, supply sequencing, and heat spreading around the device.
מומלץ
Video and Image Processing Pipelines
The large fabric and abundant block RAM make the XC7K325T-1FFG900CES suitable for multi-pixel-per-clock image processing, color conversion, object detection preprocessing, and high-rate video capture. Parallel logic resources can sustain multiple rows and channels, while 500 I/O are useful for parallel sensor, frame-buffer, and display interfaces. The 16 GTX transceivers can support camera or display links when their supported rates and pin assignments match the design. Engineers should pipeline stages according to -1 timing results, avoid routing high-speed interfaces through general-purpose I/O, and preserve timing margin for image-processing latency targets.
מומלץ
Aerospace and Defense Processing
The XC7K325T-1FFG900CES can support programmable radar, electronic-warfare, signal-intelligence, and rugged edge-processing designs when its qualification and temperature requirements satisfy the program. Its 326,080 logic cells and 16,404,480 bits of block RAM enable parallel detection, tracking, and filtering functions, while dedicated GTX transceivers simplify serial data ingestion. The ES suffix must be evaluated against the program-specific qualification, reliability, screening, and documentation requirements; it does not by itself establish compliance with every aerospace or defense procurement standard.
מומלץ
Test and Instrumentation Systems
Instrumentation and automated-test equipment benefits from the XC7K325T-1FFG900CES when it must combine wide parallel capture, substantial storage, pattern generation, and real-time analysis. The 500-I/O count enables dense interfaces to memories and DUT fixtures, and 16,404,480 bits of block RAM can hold samples, reference patterns, and intermediate results. GTX channels may carry trigger, synchronization, or high-rate test traffic where supported. The design must account for deterministic clocking, acquisition skew, calibration paths, and thermal behavior of the dense 900-ball package to avoid measurement errors that appear as algorithmic faults.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XC7K325T-1FFG900CES — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XC7K325T-1FFG900C | XC7K325T-1FFG900I | XC7K325T-2FFG900C | XC7K325T-2FFG900I | XC7K325T-2FFG900CES |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-BBGA FCBGA, FFG900 | 900-BBGA FCBGA, FFG900 - same | 900-BBGA FCBGA, FFG900 - same | 900-BBGA FCBGA, FFG900 - same | 900-BBGA FCBGA, FFG900 - same | 900-BBGA FCBGA, FFG900 - same |
| Programmable Logic Cells | 326080 cells | 326080 cells | 326080 cells | 326080 cells | 326080 cells | 326080 cells |
| Configurable Logic Blocks | 25475 CLBs | 25475 CLBs | 25475 CLBs | 25475 CLBs | 25475 CLBs | 25475 CLBs |
| User I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O | 500 I/O |
| High-Speed Transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers | 16 transceivers |
| Speed Grade | -1 | -1 | -1 | -2 | -2 | -2 |
| Ordering Class | ES suffix | C suffix | I suffix | C suffix | I suffix | ES suffix |
| Internal Memory | 16404480 bits | 16404480 bits | 16404480 bits | 16404480 bits | 16404480 bits | 16404480 bits |
| Maximum Clock Figure | 1098 MHz | 1098 MHz | 1098 MHz | 1098 MHz | 1098 MHz | 1098 MHz |
מבדילים עיקריים
- ES ordering class within the same Kintex-7 FFG900 device (לעומתXC7K325T-1FFG900C)
- Lower speed grade with the same resource and package platform (לעומתXC7K325T-2FFG900C)
- Pin-compatible migration within the AMD Kintex-7 family (לעומתXC7K325T-1FFG900I)
הערות תכנון
Do not treat the FFG900 footprint as a direct substitute for a smaller Kintex-7 package. The 500-I/O device demands a complete multi-rail power design, including separately decoupled supply domains for the core, I/O, and transceiver sections where applicable. Follow the AMD power estimator for the selected utilization and temperature condition, then verify sequencing and load-transient behavior on the assembled board. Because the -1 and -2 grades have different dynamic characteristics, recalculate thermal and supply margins before changing speed grade.
Use the device-specific AMD package pinout file and UG475 to validate all 900 ball assignments against the PCB footprint. Keep high-speed transceiver pairs routed with controlled length and impedance, place decoupling close to the relevant supply balls, and preserve the package's thermal-escape structure. Do not rely on a generic FFG900 symbol from another family or an inferred ball map; Vivado and the board constraints file must agree with the released PCB footprint.
A pin-compatible FPGA alternative is not automatically a transparent replacement. Changing the C, I, or ES ordering class can alter the temperature range or qualification context, while moving from -1 to -2 can change timing and power. Before substitution, review the AMD ordering guide, re-run implementation for the exact device, check transceiver placement and reference clocks, and regenerate the production bitstream. Do not reuse a -1 bitstream on a -2 device without following the AMD configuration procedure.
A 326,080-cell Kintex-7 device can consume substantial dynamic power when large portions of the fabric operate at high clock rates. Treat junction temperature as a function of actual utilization, clocking, I/O activity, ambient temperature, board construction, and airflow rather than a fixed package rating. Spread heat through the PCB and verify the design at worst-case operating conditions. For industrial or extended-temperature equipment, confirm the selected ordering class and enclosure temperature before committing the layout.
מידע על תאימות
The ES ordering suffix must be reviewed against AMD ordering and qualification information for the intended industry. Automotive, aerospace, defense, and industrial program requirements are not established by the available data.