Infineon

XMC1100T016F0064AAXUMA1 - 32MHz Cortex-M0 64KB MCU | Infineon

MPN: XMC1100T016F0064AAXUMA1 ✓ פעיל
PG-TSSOP-16-8 Package 32 MHz Speed 64 KB Memory
כמות הזמנה מינימלית: 1 |

XMC1100T016F0064AAXUMA1 סקירה

Infineon Technologies XMC1100T016F0064AAXUMA1 is a 32-bit ARM Cortex-M0 microcontroller operating at 32 MHz with 64 KB of Flash memory in a PG-TSSOP-16-8 package. The device is designed for compact embedded control applications requiring an efficient 32-bit processor, integrated programmable I/O, and a small surface-mount footprint. Its 16-pin package supports space-constrained industrial, consumer, appliance, sensor, and communications equipment designs.

An ARM Cortex-M0 microcontroller is a compact 32-bit processor used in embedded systems. It belongs to the microcontroller hierarchy, combining a processor core, memory interface, programmable I/O, timers, communication peripherals, and interrupt control on one integrated circuit. The XMC1000 family is intended for cost-sensitive applications where deterministic control, efficient code execution, and a small package are more important than a large memory map or high pin count.

The XMC1100T016F0064AAXUMA1 combines a 32 MHz ARM Cortex-M0 core with 64 KB of Flash storage. The PG-TSSOP-16-8 package exposes the device in a 16-lead surface-mount form factor. The industrial XMC1100 product page identifies the family as an ARM Cortex-M0 industrial microcontroller with a 32 MHz core, 64 KB Flash, and TSSOP-16 package, matching the target device ordering code.

The XMC1100 series datasheet states that most peripherals use input multiplexers to select different input sources. It also notes that input paths remain active while a pin is configured as an output, allowing feedback to on-chip resources without consuming an additional external pin. This characteristic can simplify firmware configuration when a physical pin must change between input and output roles.

Typical applications include industrial sensor controllers, motor and actuator supervision, building automation, appliance control, compact power-conversion controllers, and low-cost communications equipment. The 64 KB Flash capacity is suitable for firmware that does not require a large graphical interface or extensive local data storage. For designs requiring more code space, higher clock performance, or a larger package, compare the device with other XMC1000 derivatives before finalizing the PCB.

The PG-TSSOP-16-8 footprint simplifies assembly in small-format products, but the limited pin count requires careful planning for power, ground, programming access, clocking, communications, and application I/O. Confirm the exact pin multiplexing, alternate-function restrictions, and exposed-pin assignments in the manufacturer datasheet and reference documentation before routing the board.

This page combines the manufacturer ordering information, series data sheet details, distributor listings, programming-tool support information, and practical replacement guidance for engineers evaluating the XMC1100T016F0064AAXUMA1 in embedded designs.

חלופות תחליף ישיר עבור XMC1100T016F0064AAXUMA1 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם XMC1100T016F0064AAXUMA1 (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory.

XMC1100T016F0064ABXUMA1

✅ Drop-In
Infineon
📦 PG-TSSOP-16-8
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 · 32 MHz · 64 KB (64K x 8) · 16 KB · 32-bit RISC · XMC1000 · XMC1100-T016F0064-AB

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XMC1100T016F0064AAXUMA1 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ARM Cortex-M0 microcontroller
Processor Core ARM Cortex-M0
CPU Frequency 32 MHz
Flash Memory 64 KB
Flash Organization 64K x 8
מארז PG-TSSOP-16-8
מספר פינים 16 pins
סוג הרכבה Surface mount
Industrial Variant Industrial ARM Cortex-M0 microcontroller
Programming Interface Arm serial debug programming support
Hardware Breakpoints 2
Peripheral Input Multiplexing Supported
Input Path During Output Configuration Active

מדריך תצורת פינים של XMC1100T016F0064AAXUMA1 pg-tssop-16-8

תצורת פינים עבור XMC1100T016F0064AAXUMA1 (מארזת pg-tssop-16-8). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת pg-tssop-16-8 עבור XMC1100T016F0064AAXUMA1

אין נתוני פריסת פינים מפורטים עבור XMC1100T016F0064AAXUMA1.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XMC1100T016F0064AAXUMA1 מתאים עבור 6 יישוםs: Industrial Sensor Controllers, Building Automation Modules, Appliance Control, Compact Power Conversion Control, Motor and Actuator Supervision, Communications Equipment.

🏭

Industrial Sensor Controllers

The XMC1100T016F0064AAXUMA1 fits compact industrial sensor controllers that combine digital sensing, status monitoring, and local control in a 16-pin package. Its 32 MHz ARM Cortex-M0 core provides enough processing throughput for supervisory logic, communication handling, and debounce or filtering functions, while 64 KB of Flash accommodates a focused embedded application rather than a large application framework. Peripheral input multiplexing is particularly useful when the same physical pin must support different input sources or provide feedback while configured as an output. Keep the design within the device's verified supply range and use the manufacturer Port I/O mapping to assign pins before placing connectors, sensors, and protection components around the TSSOP footprint.

🏠

Building Automation Modules

The XMC1100T016F0064AAXUMA1 is appropriate for building-automation modules that coordinate sensors, actuators, status LEDs, and serial communications on a compact board. A 32 MHz Cortex-M0 core supports responsive event handling, and the 64 KB Flash store is practical for protocol handling, scheduled control logic, configuration storage, and diagnostic routines. The PG-TSSOP-16-8 package leaves board area for connectors and isolated communication hardware, although its limited pin count makes alternate-function planning essential. Use the pin-description and Port I/O tables in the XMC1100 documentation, keep exposed pads and ground-return layout within the package recommendations, and validate the module against its environmental and isolation requirements before production use.

🔧

Appliance Control

The XMC1100T016F0064AAXUMA1 can serve as the main controller in a compact appliance when the product requires deterministic logic for buttons, relays, sensors, displays, and motor supervision. Its 32 MHz ARM Cortex-M0 core processes control tasks without a large external processor, and 64 KB of Flash provides a practical code budget for state machines, safety checks, and device communication. Programmable I/O reduces the need to reserve dedicated pins for every peripheral, but the PG-TSSOP-16-8 package still requires careful allocation of power, ground, programming signals, and communications. Confirm the exact I/O voltage and timing limits in the manufacturer data sheet, and use the pin-mapping table to ensure every motor, relay, and sensor interface has a defined operating state during reset.

⚡

Compact Power Conversion Control

The XMC1100T016F0064AAXUMA1 is useful for supervisory control in compact power-conversion equipment where an MCU coordinates PWM commands, fault flags, temperature monitoring, and communication with a dedicated converter stage. The 32 MHz Cortex-M0 core offers efficient control-loop execution, while 64 KB of Flash can hold control algorithms, parameter handling, and fault-recovery code. The TSSOP-16-8 footprint allows the controller to sit close to the power stage, reducing control-loop routing complexity, provided the PCB separates sensitive analog returns from switching currents. Review the exact timing, I/O, and electrical limits in the manufacturer data sheet, and implement hardware shutdown paths so a firmware fault cannot leave the power stage in an unsafe state.

⚙️

Motor and Actuator Supervision

The XMC1100T016F0064AAXUMA1 can supervise low- to moderate-complexity motor and actuator systems where position sensing, limit detection, timing, and fault reporting must be coordinated by a small controller. A 32 MHz ARM Cortex-M0 core handles real-time control tasks, and the 64 KB Flash budget is suitable for compact algorithms and diagnostic sequences. Its programmable peripheral input paths allow sensor signals to be routed to internal resources, but the 16-pin package must still support the chosen motor driver, sensor interfaces, and fault signals. Use the complete Port I/O function mapping during schematic design, and validate timing margins at the maximum operating frequency before using the device as a direct replacement in an existing motor-control board.

🌐

Communications Equipment

The XMC1100T016F0064AAXUMA1 fits compact communications equipment that requires protocol handling, configuration, status monitoring, and control of external transceivers. The 32-bit Cortex-M0 core provides efficient 32-bit execution for packet processing and control tasks, while 64 KB of Flash is appropriate for a focused protocol stack and device firmware. Peripheral input multiplexing can make limited I/O more flexible, and the PG-TSSOP-16-8 package supports dense production boards. The MCU does not replace a network transceiver, so the final design must allocate pins for its interface, oscillator or clock source, reset, programming access, and power distribution. Confirm peripheral availability and package restrictions in the XMC1100 data sheet before assigning a communications interface.

What are the key specifications of XMC1100T016F0064AAXUMA1 that engineers should know?
The XMC1100T016F0064AAXUMA1 is an Infineon 32-bit ARM Cortex-M0 microcontroller rated at 32 MHz with 64 KB of 64K x 8 Flash memory in a PG-TSSOP-16-8 package. According to the manufacturer product page and XMC1100 data sheet, the family provides programmable I/O with peripheral input multiplexing, and the device support catalog identifies two hardware breakpoints for the XMC1100-64 variant.
What is the operating voltage of XMC1100T016F0064AAXUMA1?
The XMC1100T016F0064AAXUMA1 supports a 1.8 V to 5.5 V operating range, allowing operation from common 1.8 V, 2.5 V, 3.3 V, and 5 V system rails. The exact device limits and timing margins should be checked in the manufacturer data sheet, which describes the electrical characteristics of the XMC1100 series.
Where can I download the XMC1100T016F0064AAXUMA1 datasheet PDF?
The XMC1100 series data sheet is available from Infineon as a manufacturer PDF, and an additional AB-step data sheet is published on the Infineon website. Use the XMC1100 data sheet to review ordering designations, electrical characteristics, physical characteristics, and peripheral descriptions for the target XMC1100T016F0064AAXUMA1.
Where can I find the XMC1100T016F0064AAXUMA1 pinout?
The XMC1100T016F0064AAXUMA1 pinout is identified in the manufacturer XMC1100 data sheet, including the PG-TSSOP-16-8 package drawing and the Port I/O function mapping. The manufacturer notes that Table 9 contains the complete Port I/O function mapping; use that table together with the package drawing when assigning PCB tracks.
What is the difference between XMC1100T016F0064AAXUMA1 and XMC1100T016F0064ABXUMA1?
Both XMC1100T016F0064AAXUMA1 and XMC1100T016F0064ABXUMA1 are listed as 32 MHz ARM Cortex-M0 XMC1000 microcontrollers with 64 KB Flash in PG-TSSOP-16-8 packages. The ordering code identifies different product steps or variants, so engineers should compare the corresponding manufacturer ordering tables and step-specific errata before treating either part as a drop-in replacement.
What is the best drop-in replacement for XMC1100T016F0064AAXUMA1?
The closest documented same-package candidate is Infineon XMC1100T016F0064ABXUMA1, which is listed with the same 32 MHz Cortex-M0 core, 64 KB Flash, and PG-TSSOP-16-8 package. Verify the exact step, temperature range, pin functions, errata, qualification status, and firmware-device identifier before production use.
Can XMC1100T016F0064ABXUMA1 replace XMC1100T016F0064AAXUMA1?
XMC1100T016F0064ABXUMA1 is a same-package replacement candidate for XMC1100T016F0064AAXUMA1 because both are identified as 32 MHz ARM Cortex-M0 devices with 64 KB Flash in PG-TSSOP-16-8 packages. Final approval still requires checking the ordering table, device step differences, qualification markings, and any applicable errata.
When should I choose XMC1100T016F0064AAXUMA1 over another 32-bit microcontroller?
Choose XMC1100T016F0064AAXUMA1 when a design needs a 32 MHz ARM Cortex-M0 core, 64 KB of Flash, and a compact 16-pin TSSOP package in an industrial embedded product. It is particularly suitable for cost-sensitive control logic with moderate firmware requirements and no need for a large package, extensive external memory, or a higher-performance Cortex-M core.
Is XMC1100T016F0064AAXUMA1 suitable for industrial sensor controllers?
The XMC1100T016F0064AAXUMA1 is suitable for compact industrial sensor-controller designs that operate at 32 MHz and fit within a 16-pin package. Its 64 KB Flash capacity supports moderate control firmware, while programmable I/O and peripheral input multiplexing help connect sensors, digital interfaces, and supervisory functions without unnecessary external components.
How much power does XMC1100T016F0064AAXUMA1 consume?
Power consumption depends on supply voltage, clock configuration, active peripherals, GPIO activity, and operating mode, so one fixed current value does not describe every condition. Use the manufacturer data sheet's operating-current and sleep-mode tables to compare active and low-power behavior against the system power budget.
Which programming tools support XMC1100T016F0064AAXUMA1?
The XMC1100 device-support catalog identifies XMC1100-64 as an Infineon XMC1100 variant and states that compatible programming hardware and software tools support the family. The target has a 64 KB Flash configuration, so select the matching device identifier in the programming tool and verify the programming interface settings against the board design.
Where can I buy XMC1100T016F0064AAXUMA1 and check its lead time?
Use the Request a Quote form on this page to request current availability, lead time, and order handling for XMC1100T016F0064AAXUMA1. Include the required quantity, package suffix, and target delivery date so the quotation reflects the exact 64 KB PG-TSSOP-16-8 device.
What is the price of XMC1100T016F0064AAXUMA1?
The current commercial price for XMC1100T016F0064AAXUMA1 should be requested through the Request a Quote form on this page. Submit the required quantity and delivery schedule for an exact quotation covering the Infineon 64 KB PG-TSSOP-16-8 microcontroller without relying on a stale historical price.
Is XMC1100T016F0064AAXUMA1 in stock?
Current stock status for XMC1100T016F0064AAXUMA1 should be confirmed through the Request a Quote form on this page. Include your required quantity, production schedule, and approved delivery location so the response reflects the exact ordered part number and packaging configuration.
What can replace XMC1100T016F0064AAXUMA1?
XMC1100T016F0064ABXUMA1 is the closest documented drop-in candidate because both devices use the PG-TSSOP-16-8 package and are listed with a 32 MHz ARM Cortex-M0 core and 64 KB Flash. Review device-step errata, qualification, temperature markings, and peripheral details before approving the substitution.
Is XMC1100T016F0064AAXUMA1 RoHS compliant?
RoHS status should be confirmed from the current manufacturer product declaration or material-compliance documentation for the exact ordering code. The XMC1100 series documentation supports electrical and lifecycle evaluation, but RoHS, REACH, lead-free, halogen-free, and automotive-qualification claims should not be inferred solely from the family name.

נתוני עזר הנדסיים עבור XMC1100T016F0064AAXUMA1 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose XMC1100T016F0064AAXUMA1 for a compact embedded design that needs a 32 MHz ARM Cortex-M0 core, 64 KB of Flash, and a PG-TSSOP-16-8 footprint. It is a strong fit for sensor controllers, appliance logic, building-automation endpoints, communication modules, and supervisory control where moderate firmware and a small pin count are priorities. XMC1100T016F0064ABXUMA1 is the closest documented same-package candidate because it shares the core frequency, Flash capacity, and package. Select it only after checking the ordering table and product-step differences. If the application needs more than 64 KB of Flash, more I/O, a larger package, or a faster processor, move to a different XMC derivative or a higher-capacity MCU rather than forcing a drop-in substitution. Validate supply voltage, temperature grade, timing, errata, and programming-device support before releasing production firmware.

השוואה עם חלופות

פרמטר מוצר זה XMC1100T016F0064ABXUMA1
Brand Infineon Technologies Infineon Technologies
Package PG-TSSOP-16-8 PG-TSSOP-16-8
Processor Core ARM Cortex-M0 ARM Cortex-M0
CPU Frequency 32 MHz 32 MHz
Flash Memory 64 KB 64 KB
Product Variant AA ordering variant AB ordering variant
Programming Support XMC1100-64 device support listed XMC1100-64 device support listed

מבדילים עיקריים

  • Same documented core and memory configuration as the AB-step candidate (לעומתXMC1100T016F0064ABXUMA1)
  • Compact 16-pin surface-mount integration (לעומתXMC1100T016F0064ABXUMA1)
  • Direct fit for XMC1100-64 programming workflows (לעומתXMC1100T016F0064ABXUMA1)

הערות תכנון

Reserve the PG-TSSOP-16-8 footprint exactly as shown in the manufacturer package drawing, including pin-1 orientation and exposed thermal-pad requirements where applicable. Place decoupling, programming-header access, and clock components close to their associated pins. Because the package has only 16 leads, finalize alternate-function allocation before routing; a pin needed later for a peripheral may require a different board revision.

Design the supply network around the device's documented operating range and verify startup, reset, and I/O voltage compatibility with every connected sensor, transceiver, or actuator. Add local high-frequency bypass capacitance and provide a clean return path to the device ground. Do not infer a 3.3 V-only system from general marketplace descriptions; confirm the exact voltage limits for this ordering code in the manufacturer data sheet.

Do not assign pins solely by their generic GPIO names. The XMC1100 family uses peripheral input multiplexing, and the manufacturer notes that an input path remains active while the pin is configured as an output. Review the complete Port I/O function mapping and alternate-function tables before finalizing the schematic, then test every pin after reset to ensure its boot and safe-state behavior matches the system design.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer identifies the XMC1100-T016F0064-AB family as industrial, but exact compliance declarations and AEC-Q100 status for the AA ordering code require current manufacturer documentation.

חיפושים קשורים

XMC1100T016F0064AAXUMA1 XMC1100T016F0064AAXUMA1 datasheet XMC1100T016F0064AAXUMA1 pinout XMC1100T016F0064AAXUMA1 datasheet pdf XMC1100T016F0064AAXUMA1 schematic XMC1100T016F0064AAXUMA1 programming XMC1100T016F0064AAXUMA1 equivalent XMC1100T016F0064AAXUMA1 replacement XMC1100T016F0064AAXUMA1 vs XMC1100T016F0064ABXUMA1 XMC1100T016F0064AAXUMA1 footprint XMC1100T016F0064AAXUMA1 price XMC1100T016F0064AAXUMA1 stock Infineon XMC1100T016F0064AAXUMA1 XMC1100T016F0064AAXUMA1 TSSOP-16 application

רכיבים ומונחים קשורים

Infineon Technologies XMC1100T016F0064AAXUMA1 XMC1100T016F0064ABXUMA1 XMC1100 XMC1000 ARM Cortex-M0 32-bit microcontroller embedded microcontroller industrial microcontroller semiconductor 64 KB Flash memory 32 MHz clock PG-TSSOP-16-8 TSSOP package family surface-mount package peripheral input multiplexer Port I/O mapping Arm serial debug XMC1100-64 PEmicro industrial sensor control building automation appliance control power-conversion control communications equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר