Z86E6116ASG - 16MHz 8-Bit Z8 MCU, 16KB OTP, UART | Zilog
MPN: Z86E6116ASG ✓ פעילZ86E6116ASG סקירה
A microcontroller (MCU) is a self-contained computer on a single die, combining a CPU core, non-volatile program memory, data RAM, and peripherals such as timers and serial ports. Within the Zilog portfolio the device belongs to the Z8 family, which sits under the broader 8-bit microcontroller class alongside 8051-derivative devices. Z8 parts add on-chip oscillators, watchdogs, UARTs and brownout detection in a compact low-cost package, making them typical choices for appliance controls, meters and simple consumer equipment.
Key features of this device include a 16 MHz internal oscillator with 16 KB of OTP program memory, 236 bytes of general-purpose RAM for stack, variables and working buffers, and an on-chip UART for serial debug or communication links. The operating supply range is 4.5 V to 5.5 V, and the specified temperature range is 0 C to +70 C, identifying the part as a commercial-grade (C) device. The 44-LQFP package offers a 10 mm x 10 mm body with 0.5 mm lead pitch and a 1.0 mm stand-off height, which keeps the footprint compatible with standard surface-mount assembly and repair flows.
Architecturally, the Z8 core is an enhanced 8-bit design with a multi-source interrupt controller, programmable I/O ports, and on-chip peripherals that reduce external component count. Because the Z86E61xx devices are EPROM versions of the Z86C61 and Z86C63 devices, existing 8051-era designs can be adapted by changing only the device type and programmer, while keeping the same board-level pin arrangement.
Typical applications include small appliance and white-goods control panels, HVAC and thermostat modules, simple serial-connected sensor hubs, LED signage controllers, and battery or mains powered instrumentation with a serial interface to a host processor. The 236-byte RAM budget suits firmware that performs state-machine control, key scanning, and periodic sensor polling rather than heavy protocol stacks.
One key design consideration is OTP memory: the 16 KB program array can be written only once, so development normally proceeds on the mask-programmable or EPROM equivalents, and the production board layout should be frozen before the OTP parts are ordered. Keep 0.1 uF bypass decoupling close to VDD and VSS pins and route the oscillator pins away from switching nodes.
This page combines distributor availability and package details with pin-compatible Z8 family members, application scenarios, and practical design notes that go beyond a single datasheet download, helping engineers select the correct Zilog MCU and plan sourcing in one place.
חלופות תחליף ישיר עבור Z86E6116ASG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
Z86C6116ASG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z86C6316ASG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z86E6114ASG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z86E6112ASG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z86C6314ASG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
Z86E6116ASG דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-Bit Microcontroller (MCU), Z8 Family |
| Manufacturer | Zilog |
| תדר שעון מקסימלי | 16 MHz |
| Program Memory (Flash/EPROM) | 16 KB (16K x 8), One-Time Programmable |
| General-Purpose RAM | 236 Bytes |
| Operating Supply Voltage Range | 4.5 V to 5.5 V |
| טווח טמפרטורת פעולה | 0 C to +70 C |
| מארז | 44-LQFP (10 mm x 10 mm) |
| Lead Pitch | 0.5 mm |
| סוג הרכבה | Surface Mount |
| Core / Architecture | Z8 8-bit CPU |
| Peripherals | UART, timers, watchdog, multi-source interrupt controller |
| Program Memory Type | EPROM (EPROM-compatible Z86C61 / Z86C63 pinout) |
| Available Package Styles in Family | 40-pin DIP, 44-pin PLCC, 44-pin LQFP |
| סטטוס RoHS | Compliant (RoHS) |
| Product Class | Commercial grade (0 C to +70 C) |
מדריך תצורת פינים של Z86E6116ASG 40-pin dip, 44-pin plcc, 44-pin lqfp
תצורת פינים עבור Z86E6116ASG (מארזת 40-pin dip, 44-pin plcc, 44-pin lqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור Z86E6116ASG.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
Z86E6116ASG מתאים עבור 6 יישוםs: Appliance and White-Goods Control Panel, Thermostat and HVAC Module, Serial Sensor Hub and Metering, LED Signage and Display Driver, Battery-Powered Instrumentation with Boost Stage, Legacy 8051 Board Upgrade Path.
Appliance and White-Goods Control Panel
The Z86E6116ASG suits small appliance controllers that scan a keypad, drive relays and segments, and manage a small state machine. With 236 bytes of general-purpose RAM, the firmware comfortably holds debounce counters, timer presets and a short command buffer, while the 16 MHz clock gives fast enough timer resolution for motor timing and buzzer patterns. The single 4.5 V to 5.5 V supply means one regulator stage feeds the MCU even when the mains-derived rail is stepped down, and the 0.5 mm pitch 44-LQFP footprint keeps the controller board compact for panel-mounted housings. The on-chip UART allows a service port to the main board for diagnostics without adding a second serial interface chip.
מומלץ
Thermostat and HVAC Module
Z86E6116ASG fits thermostat and HVAC controller modules that must read a temperature sensor on a periodic schedule, drive a relay or triac, and expose a serial link to a wall controller. The Z8 on-chip timer and interrupt structure lets the firmware time the sensor conversion interval without busy waiting, which keeps the 236 bytes of RAM free for the last few readings and the hysteresis state. Because the MCU runs from 4.5 V to 5.5 V, it sits comfortably behind a 5 V regulator supplied from the transformer rectifier stage typical of wall thermostats, and the internal 16 MHz oscillator removes crystal cost and layout area on a crowded thermostat PCB.
מומלץ
Serial Sensor Hub and Metering
The Z86E6116ASG is a natural fit for a small serial-connected sensor hub that polls a handful of sensors and forwards readings to a host processor over the UART. The 16 MHz clock supports reliable UART bit timing at standard baud rates with generous margin, and the 236-byte RAM is adequate for a ring buffer of recent samples plus the framing state. Because the program memory is one-time-programmable, production units are programmed once after the firmware is validated on the EPROM equivalent, and the final board can be released without rework. The 44-LQFP package keeps the assembly cost low on automated pick-and-place lines in high-volume meter production.
מומלץ
LED Signage and Display Driver
LED signage controllers and small display modules can use the Z86E6116ASG to generate timing and refresh sequences without an external display driver IC. The 16 MHz internal oscillator gives deterministic refresh timing, and the general-purpose I/O pins of the Z8 port structure drive segment or pixel enable lines directly. With 236 bytes of RAM, a page buffer for a short scrolling message plus the animation state is workable, and the 5 V-only supply range matches the LED driver stage that most sign modules already run from. The commercial 0 C to +70 C rating suits indoor signage, while outdoor installations should specify a wider temperature grade rather than this ordering code.
מומלץ
Battery-Powered Instrumentation with Boost Stage
For portable instrumentation such as handheld meters or a battery-backed logger, the Z86E6116ASG provides the control brain behind a boost converter that lifts a single cell to the 4.5 V to 5.5 V rail the MCU requires. The internal oscillator and on-chip peripherals reduce the external component count, which matters when every milliamp affects run time, and the low-cost LQFP-44 package supports compact assembly. Firmware can implement wake, sample and sleep cycles entirely in the Z8 core. Designers should note that this ordering code is rated 0 C to +70 C only, so a cold-chain or outdoor product needs an extended-temperature variant and a low-quiescent-current regulator.
מומלץ
Legacy 8051 Board Upgrade Path
Because Zilog documents the Z86E61xx OTP parts as pin-compatible EPROM versions of the Z86C61 and Z86C63 devices, the Z86E6116ASG is a natural fit for modernising an existing 8051-derived board without respinning the layout. The same family exists in 40-pin DIP, 44-pin PLCC and 44-pin LQFP outlines, so a legacy PLCC or DIP design can stay as-is while a new LQFP board uses the same firmware architecture. The transition from the older mask-programmable EPROM part to OTP also removes the UV-erase programming step from the manufacturing flow, which shortens test cycle time and reduces production tooling requirements.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור Z86E6116ASG — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | Z86C6116ASG | Z86C6316ASG | Z86E6114ASG | Z86E6112ASG | Z86C6314ASG |
|---|---|---|---|---|---|---|
| Package | 44-LQFP (10 mm x 10 mm) | 44-LQFP (10 mm x 10 mm) - identical | 44-LQFP (10 mm x 10 mm) - identical | 44-LQFP (10 mm x 10 mm) - identical | 44-LQFP (10 mm x 10 mm) - identical | 44-LQFP (10 mm x 10 mm) - identical |
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog | Zilog |
| Program Memory Type | One-Time Programmable (EPROM-based) | EPROM, re-programmable in circuit | EPROM, re-programmable in circuit | One-Time Programmable | One-Time Programmable | EPROM, re-programmable in circuit |
| General-Purpose RAM | 236 Bytes | 236 Bytes | 236 Bytes | 236 Bytes | 236 Bytes | 236 Bytes |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Operating Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Operating Temperature Range | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C |
| Serial Interface | UART on-chip | UART on-chip | UART on-chip | UART on-chip | UART on-chip | UART on-chip |
| Programming Method | OTP, single write at programming | EPROM, repeatable in-circuit programming | EPROM, repeatable in-circuit programming | OTP, single write at programming | OTP, single write at programming | EPROM, repeatable in-circuit programming |
מבדילים עיקריים
- OTP cost advantage over the re-programmable EPROM counterpart (לעומתZ86C6116ASG)
- Larger program memory for message-heavy firmware (לעומתZ86E6116ASG)
- Cost-optimized path for firmware that fits a smaller memory (לעומתZ86E6116ASG)
- Single-supply 5 V operation simplifies system power design (לעומתAT87C51RB2-RLTUM)
הערות תכנון
OTP program memory can be written only once, so firmware must be frozen before the production order is placed. Develop on the EPROM equivalent of the same device, or on a socketed prototype board, and only release the OTP parts once the exact image has been validated. If a revision is needed later, a new device must be programmed and, if the same board is reused, the old IC must be physically replaced. Plan the firmware freeze, programming fixtures and date-code traceability into the manufacturing schedule well before the build starts.
The Z86E6116ASG operates from a single 4.5 V to 5.5 V rail, which removes the need for level shifting but demands a stable 5 V source. Place a 100 nF ceramic bypass capacitor close to each supply pin and add a bulk electrolytic or ceramic capacitor of about 10 uF near the regulator output to absorb switching ripple from adjacent stages. Keep the ground return of the capacitor directly under the device rather than through the outer ground pour, so that supply ripple is not injected into the analog or oscillator return paths.
The 44-LQFP outline uses a 0.5 mm lead pitch, so route escape between pads on a 0.4 mm or finer class board and allow for proper solder mask dam and via-in-pad decisions in the fan-in region. Because the Z8 core runs from an internal oscillator, keep the layout quiet: separate the MCU supply and ground pours from switching converter and relay drive areas, keep the analog or sensor inputs away from the MCU underside, and provide a solid ground plane reference so the UART and timer thresholds are not disturbed by high di/dt paths on the same board.
Do not assume the 44-pin LQFP part can be substituted into a 44-pin PLCC or 40-pin DIP board. The Z8 family is offered in all three outlines and the pin numbering differs between them, so a board change is required even though the firmware is compatible. Also verify the temperature grade: this ordering code is specified for 0 C to +70 C, and products used in cold outdoor enclosures, automotive bays or industrial cabinets should use an extended-temperature ordering code from the same family.
מידע על תאימות
RoHS compliance is stated on the Zilog listing for the Z86E6116ASG. Reach, lead-free termination, halogen-free status and conflict-minerals declarations are not published in the available listings and remain unverified. The device is not automotive grade; the ordering code is specified for 0 C to +70 C commercial operation.