NXP Semiconductors

MC9S08RC16CFG - 8-Bit 8MHz 16KB MCU | NXP | 44-LQFP

MPN: MC9S08RC16CFG ✗ סוף ייצור
1.8 V to 3.6 V Vdss 44-LQFP (10 mm x 10 mm) Package 8 MHz Speed 16 KB (16K x 8 bits) Memory
כמות הזמנה מינימלית: 1 |

MC9S08RC16CFG סקירה

The NXP Semiconductors MC9S08RC16CFG is an 8-bit S08 microcontroller operating at up to 8 MHz, with 16 KB of Flash memory and a 44-LQFP package measuring 10 mm by 10 mm. It is designed for compact embedded-control designs requiring modest processing throughput, nonvolatile program storage, and a low-profile surface-mount footprint.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral functions onto one device. The S08 architecture belongs to the embedded processor hierarchy and combines a compact instruction set, dedicated I/O, timers, serial interfaces, and Flash-based firmware storage. The MC9S08RC16CFG is therefore positioned between simple fixed-function controllers and higher-performance microcontrollers used in networking or graphics-intensive equipment.

The device provides 16 KB, or 16K by 8 bits, of Flash program memory and an 8 MHz maximum operating frequency. Its stated operating-voltage range of 1.8 V to 3.6 V supports low-voltage embedded systems. The 44-LQFP package provides 44 external connection points in a compact 10 mm by 10 mm surface-mount body, allowing designers to retain a relatively high pin count without moving to a larger through-hole package.

The S08 architecture emphasizes economical control of embedded peripherals and deterministic firmware execution. Designers can use the available I/O pins for digital interfaces, timing functions, sensor acquisition, and actuator control. Because the processor is 8-bit rather than 32-bit, code density and arithmetic performance may differ from ARM-based microcontrollers, but the simpler architecture can remain effective for control-oriented products with modest data-processing requirements.

Typical applications include building controls, household appliances, battery-operated instruments, compact industrial controllers, sensor interfaces, and small motor-control systems. The 8 MHz clock and 16 KB Flash configuration are well matched to products that coordinate several peripheral functions without requiring an operating system, high-speed communications, or extensive external storage.

The principal design consideration is firmware and peripheral planning before PCB layout. Confirm the exact pin multiplexing, reset requirements, clock configuration, and decoupling recommendations in the manufacturer datasheet. The 1.8 V to 3.6 V operating range also requires a supply regulator and bulk and high-frequency bypass capacitors placed close to the power pins according to the reference circuit.

This page combines the identified electrical characteristics, package information, sourcing guidance, and practical selection criteria for the MC9S08RC16CFG. It also distinguishes documented device facts from parameters that require direct confirmation in the manufacturer datasheet, helping engineers plan sourcing and hardware qualification without confusing related S08 variants.

חלופות תחליף ישיר עבור MC9S08RC16CFG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

MC9S08RC16CFGE

✅ Drop-In
📦 44-LQFP (10x10)
Same stated 8 MHz S08 core, 16 KB Flash, and 44-LQFP footprint; suffix-specific temperature and qualification ratings require confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

MC9S08RC16CFG דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit S08 Flash Microcontroller
Maximum CPU Frequency 8 MHz
Flash Memory 16 KB (16K x 8 bits)
Processor Architecture S08 8-bit architecture
Operating Voltage Range 1.8 V to 3.6 V
מארז 44-LQFP (10 mm x 10 mm)
סוג הרכבה Surface mount
מספר פינים 44 pins

מדריך תצורת פינים של MC9S08RC16CFG 44-lqfp (10 mm x 10 mm)

תצורת פינים עבור MC9S08RC16CFG (מארזת 44-lqfp (10 mm x 10 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 44-lqfp (10 mm x 10 mm) עבור MC9S08RC16CFG

אין נתוני פריסת פינים מפורטים עבור MC9S08RC16CFG.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MC9S08RC16CFG מתאים עבור 6 יישוםs: Building and HVAC Controls, Household Appliance Control, Battery-Powered Sensor Interfaces, Compact Motor and Actuator Control, Test and Measurement Instruments, Embedded Access and Security Control.

🏭

Building and HVAC Controls

The MC9S08RC16CFG is suitable for small building-control modules that monitor switches, sensors, and user inputs while driving indicators, relays, or communication interfaces. Its 8 MHz S08 processor and 16 KB of Flash provide sufficient control logic for scheduled operations, debouncing, state management, and fault detection without an operating system. The 44-LQFP package also offers enough external pins for distributed digital I/O in a compact board. Because the controller operates from 1.8 V to 3.6 V, the design must include an appropriate regulated supply and local bypass capacitance. Verify timer, serial-interface, and pin-multiplexing assignments in the manufacturer datasheet before allocating the board’s connector and sensor circuits.

🔧

Household Appliance Control

The MC9S08RC16CFG can serve as the central controller in a compact appliance by combining user-interface inputs, temperature or level sensing, motor timing, and discrete output control. Its 16 KB Flash is appropriate for a dedicated firmware state machine, while the 8 MHz operating rate supports responsive polling and timing without high-cost memory resources. The 1.8 V to 3.6 V operating range fits low-voltage product architectures, although motors, heaters, and relays will require suitable driver stages and protection. Designers should partition analog sensing from switching nodes and place input, output, and ground returns carefully. Firmware size, peripheral availability, and the exact suffix-specific temperature rating must be confirmed before freezing the appliance design.

🧩

Battery-Powered Sensor Interfaces

The MC9S08RC16CFG is appropriate for compact sensor interfaces that gather periodic measurements, apply calibration, and communicate results over a low-speed serial link. Its 8 MHz S08 core is more than adequate for many acquisition and filtering routines, while 16 KB of Flash can hold application firmware and calibration tables. The 1.8 V minimum operating voltage supports direct integration with appropriately regulated low-energy rails. For battery life, the designer should evaluate sleep currents, wake-up behavior, sensor duty cycle, and regulator efficiency in addition to processor speed. Any high-impedance sensor input needs careful grounding and guarding, while the controller supply should have local high-frequency bypass capacitance close to its power pins.

⚡

Compact Motor and Actuator Control

The MC9S08RC16CFG can control low-power actuators, solenoids, small motors, or relay-based outputs when the design uses external transistor and flyback circuitry. The S08 core’s 8 MHz clock supports deterministic sequencing of motion steps, timeout monitoring, and input interlocks, while the 16 KB Flash capacity is practical for a dedicated embedded-control application. Its 44-LQFP package provides a practical mix of I/O and power connections for a compact controller board. The MCU should not drive inductive loads directly; use appropriately rated drivers, snubber networks, and protection against back-EMF. Also separate motor-current paths from sensitive signal returns and confirm the available timer channels in the manufacturer datasheet before assigning precise timing functions.

🖥️

Test and Measurement Instruments

The MC9S08RC16CFG can serve in compact measurement products that combine sensor conditioning, digital calibration, status reporting, and local user controls. Its 8 MHz S08 processor is suitable for sequential sampling and deterministic threshold logic, and the 16 KB Flash capacity can hold a focused test routine without requiring external program storage. The 44-LQFP package is useful when a measurement product needs both control I/O and access to communication or programming signals. Precision analog performance will depend on external components and layout because the listed MCU characteristics do not define a complete analog front end. Keep sensitive analog paths away from switching nodes, use a clean regulated supply, and verify the available serial and timer resources against the instrumentation protocol.

🎥

Embedded Access and Security Control

The MC9S08RC16CFG can support compact access-control, keypad, intercom, or simple security-control modules that manage digital credentials, status LEDs, lock requests, and network or serial handshakes. Its 16 KB Flash is appropriate for a constrained control application, and the 8 MHz S08 architecture provides responsive peripheral polling without a high-complexity processor. The 1.8 V to 3.6 V operating range can simplify integration with low-voltage board-level supplies, although the final power budget depends on the external communication and lock-driver circuits. Security designs should not rely solely on the MCU for cryptographic protection unless suitable validated functions are explicitly provided. Review pin multiplexing, boot and programming behavior, and the final electrical requirements in the manufacturer documentation.

סיכום מוצרים מומלצים

MC9S08RC16CFGE Same S08 controller family with alternate ordering suffix בשימוש ב-: Building and HVAC Controls, Household Appliance Control, Battery-Powered Sensor Interfaces, Compact Motor and Actuator Control, Test and Measurement Instruments, Embedded Access and Security Control MC9S08RC16 Base device family referenced for the MC9S08RC16 datasheet בשימוש ב-: Building and HVAC Controls, Household Appliance Control, Battery-Powered Sensor Interfaces, Compact Motor and Actuator Control, Test and Measurement Instruments, Embedded Access and Security Control
What is the MC9S08RC16CFG?
The MC9S08RC16CFG is an 8-bit S08 microcontroller with an operating frequency of up to 8 MHz, 16 KB of Flash program memory, and a 44-LQFP package. According to the MC9S08RC16 datasheet, the device combines a compact processor core with embedded-control peripherals for applications that do not require 32-bit processing or a high-capacity memory system.
What are the key specifications of MC9S08RC16CFG?
The MC9S08RC16CFG operates at up to 8 MHz, provides 16 KB of Flash memory, and accepts a 1.8 V to 3.6 V supply. Manufacturer documentation identifies a 44-LQFP surface-mount package measuring 10 mm by 10 mm. RAM size, timer configuration, serial interfaces, and the complete pin-multiplexing table should be confirmed in the MC9S08RC16 datasheet before final schematic design.
What is the operating voltage of MC9S08RC16CFG?
The MC9S08RC16CFG operates from 1.8 V to 3.6 V according to the product listing for the 44-LQFP device. This low-voltage range makes the controller appropriate for compact embedded systems, although the power architecture must remain within the limits stated in the manufacturer datasheet. Confirm absolute maximum and recommended operating conditions for the exact ordering suffix.
Where can I download the MC9S08RC16CFG datasheet?
The MC9S08RC16CFG datasheet should be obtained from the MC9S08RC16 manufacturer documentation because MC9S08RC16CFG is the complete ordering code for the 44-LQFP configuration. Use the manufacturer data-sheet link for the definitive electrical tables, memory map, package drawings, and pin descriptions. The public data-sheet archive entry for MC9S08RC16 can also be used to locate historical copies.
Where can I find the MC9S08RC16CFG pinout?
The MC9S08RC16CFG pinout is defined in the pin-description and package-drawing sections of the MC9S08RC16 manufacturer datasheet. The device uses a 44-LQFP footprint, but pin names and alternate functions should be transcribed directly from that table rather than inferred from package position. Pay particular attention to supply, ground, reset, oscillator, and programming-interface assignments.
What can replace the MC9S08RC16CFG?
The MC9S08RC16CFGE is the closest documented drop-in candidate because it retains the 8 MHz S08 core, 16 KB Flash memory, and 44-LQFP package. Its exact electrical ratings and temperature grade must be compared with the MC9S08RC16CFG before substitution. No other verified pin-to-pin replacement is established on this page, so software, clock, peripheral, and lifecycle compatibility remain essential.
Is MC9S08RC16CFGE the same as MC9S08RC16CFG?
The MC9S08RC16CFGE and MC9S08RC16CFG share the S08 architecture, 8 MHz maximum frequency, 16 KB Flash configuration, and 44-LQFP package. The additional E suffix normally identifies a specific ordering-temperature or qualification configuration, so the two parts should not be treated as identical without comparing their full ordering tables. Verify the temperature range and lifecycle designation before converting an existing design.
MC9S08RC16CFG vs MC9S08RC16CFGE: which is better for a new design?
Choose the MC9S08RC16CFG when its documented operating limits and lifecycle condition satisfy the product requirements; choose the MC9S08RC16CFGE when its ordered temperature grade is more appropriate. Both use the same stated 44-LQFP footprint, 8 MHz S08 core, and 16 KB Flash organization. The decisive criteria are the suffix-specific temperature rating, availability, qualification, and required operating environment.
When should I choose MC9S08RC16CFG over a 32-bit microcontroller?
Choose the MC9S08RC16CFG when the product is primarily a control system, the application can use an 8-bit processor, and 16 KB of Flash is sufficient for the firmware. A 32-bit microcontroller may be preferable for intensive arithmetic, large protocol stacks, high-resolution data processing, or larger applications. This choice should follow a firmware-size and peripheral-requirement review rather than a simple processor-speed comparison.
Is MC9S08RC16CFG suitable for battery-operated equipment?
The MC9S08RC16CFG can suit battery-operated equipment when the product operates within its 1.8 V to 3.6 V range and the firmware can use the S08 peripherals efficiently. A low-voltage supply architecture may reduce energy use, but actual battery life also depends on standby behavior, active duty cycle, sensor load, regulator efficiency, and board leakage. Confirm sleep-mode currents and wake-up sources in the manufacturer datasheet.
What is the lead time for MC9S08RC16CFG?
Current lead time and minimum order quantity for MC9S08RC16CFG should be requested through the Request a Quote form on this page. Because this is a mature S08 ordering configuration, availability may depend on lifecycle status, remaining factory inventory, and authorized distribution. Provide the required quantity, package suffix, date code preference, and target delivery date with the quotation request.
Where can I buy MC9S08RC16CFG online?
The MC9S08RC16CFG can be requested through the Request a Quote form on this page, where the required quantity and delivery requirements can be submitted. No fixed commercial terms should be assumed without a current quotation because legacy microcontroller stock can vary by lot, date code, and packaging condition. The exact ordering code and package must remain unchanged when requesting supply.
Is MC9S08RC16CFG in stock?
MC9S08RC16CFG inventory must be confirmed through the Request a Quote form on this page rather than inferred from a generic catalog entry. A usable stock answer should confirm the manufacturer, exact 44-LQFP ordering code, quantity, lot or date-code status, and shipment location. Treat any quote as the commercial commitment for the requested configuration and condition.
What is the price of MC9S08RC16CFG?
The current commercial price of MC9S08RC16CFG is returned through the Request a Quote form on this page. The final amount depends on quantity, condition, date-code requirements, packaging, and current market availability. Submit the required order quantity and acceptance criteria so the quotation can be tied to the exact MC9S08RC16CFG ordering suffix rather than a related S08 device.
Does MC9S08RC16CFG support RoHS and AEC-Q100 applications?
The MC9S08RC16CFG's RoHS, REACH, and AEC-Q100 status must be confirmed for the exact ordering configuration before compliance-sensitive release. Automotive qualification cannot be inferred merely from an MC9S08 family relationship. Request the current manufacturer declaration or product documentation, and select an explicitly qualified ordering suffix if AEC-Q100 compliance is mandatory for the application.

נתוני עזר הנדסיים עבור MC9S08RC16CFG — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the MC9S08RC16CFG for compact 8-bit control products that operate from 1.8 V to 3.6 V and fit their firmware within 16 KB of Flash. It is especially suitable for appliances, building controls, sensor interfaces, and compact actuator controllers that benefit from a 44-LQFP footprint and an 8 MHz S08 processor. Consider the MC9S08RC16CFGE when its suffix-specific temperature rating or qualification better matches the application, but verify its complete ordering table before substitution. Do not select either device solely from package appearance: confirm RAM, timers, serial interfaces, reset behavior, oscillator options, and programming requirements against the manufacturer datasheet. If the application exceeds 16 KB of firmware, needs intensive 32-bit arithmetic, or depends on unavailable peripherals, a different microcontroller will be a better engineering choice even if its board outline appears similar.

השוואה עם חלופות

פרמטר מוצר זה MC9S08RC16CFGE
Brand NXP Semiconductors NXP Semiconductors
Package 44-LQFP (10x10) 44-LQFP (10x10)
Architecture S08 8-bit S08 8-bit
Maximum CPU Frequency 8 MHz 8 MHz
Flash Memory 16 KB 16 KB
Pin Count 44 pins 44 pins

מבדילים עיקריים

  • Compact 44-LQFP implementation of the S08 control platform (לעומתMC9S08RC16CFGE)
  • 8 MHz S08 processing with 16 KB Flash (לעומתMC9S08RC16CFGE)
  • Low-voltage operating range for compact embedded systems (לעומתMC9S08RC16CFGE)

הערות תכנון

Design the supply rail to remain within the device's stated 1.8 V to 3.6 V operating range across temperature and load. Place the required bulk capacitor and a high-frequency ceramic bypass capacitor close to the supply and ground pins, with the shortest return path possible. Confirm the exact capacitor values, allowable ESR, and regulator recommendations in the manufacturer datasheet rather than copying values from another S08 device.

Assign all 44 LQFP positions from the manufacturer pin-description table before schematic capture. Separate analog and low-level sensor routing from digital switching and relay-driver outputs, and provide a quiet ground reference for sensitive inputs. A compact 10 mm by 10 mm LQFP also needs careful inspection of solder paste volume, pad geometry, and reflow profile to avoid open joints or bridging between fine-pitch leads.

Do not treat a related MC9S08RC16 ordering suffix as interchangeable until its temperature grade, qualification, clock, and electrical limits have been compared with the MC9S08RC16CFG. In particular, verify reset behavior, oscillator options, boot configuration, programming signals, and alternate pin functions. Also confirm that the firmware fits within the 16 KB Flash allocation; a pin-compatible replacement is not useful if its memory map or peripheral set differs.

The identified component characteristics cover the core clock, Flash size, voltage range, and package, but do not establish every RAM, EEPROM, timer, ADC, or serial-interface detail. Validate those resources directly against the MC9S08RC16 datasheet before committing firmware and board routing. This prevents a design from assuming a peripheral or memory feature that is absent, qualified differently, or assigned to a different pin in the selected suffix.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The identified product information does not provide exact suffix-specific environmental or regulatory declarations. Request current manufacturer documentation before making a compliance claim.

חיפושים קשורים

MC9S08RC16CFG datasheet MC9S08RC16CFG specifications MC9S08RC16CFG pinout MC9S08RC16CFG datasheet pdf MC9S08RC16CFG equivalent MC9S08RC16CFG replacement MC9S08RC16CFG cross reference MC9S08RC16CFG vs MC9S08RC16CFGE MC9S08RC16CFG price MC9S08RC16CFG stock NXP MC9S08RC16CFG MC9S08RC16CFG 8 MHz MC9S08RC16CFG 16KB Flash MC9S08RC16CFG 44-LQFP MC9S08RC16CFG application circuit

רכיבים ומונחים קשורים

NXP Semiconductors MC9S08RC16CFG MC9S08RC16CFGE MC9S08RC16 S08 architecture 8-bit microcontroller embedded processor Flash memory 16 KB Flash 8 MHz 1.8 V to 3.6 V 44-LQFP LQFP package family surface mount technology industrial control building control appliance control sensor interface actuator control I/O pin multiplexing firmware programmable logic device
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר