AD977ANZ vs AD977AN तुलना

विस्तृत दोनों ओर की तुलना AD977ANZ द्वारा Analog Devices और AD977AN द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
AD977ANZ AD977ANZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ANZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ANZ ✓ सक्रिय
Analog Devices
AD977AN AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

AD977AN ✓ सक्रिय

विशेषता तुलना

पैरामीटर AD977ANZ AD977AN
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Converter Type Successive-approximation ADC —
रेज़ोल्यूशन 16 bit 16 bit
Throughput Rate 100 kSPS —
Input Architecture Single-ended, 1 input —
सप्लाई वोल्टेज 5 V 5 V
Internal Reference 2.5 V 2.5 V
Output Interface Serial —
ADC Architecture Switched-capacitor SAR —
पैकेज 20-pin PDIP 20-pin PDIP
माउंटिंग प्रकार Through-hole Through-hole
Temperature Grade Industrial —
Power Consumption [DATA_NEEDED: power consumption] —
Analog Input Range [DATA_NEEDED: analog input range] —
Input Resistance [DATA_NEEDED: input resistance] —
Integral Nonlinearity [DATA_NEEDED: integral nonlinearity] —
Offset Error [DATA_NEEDED: offset error] —
Gain Error [DATA_NEEDED: gain error] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS स्थिति unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Conversion Throughput — 100 kSPS
Analog Input Count — 1 input
Architecture — Successive-approximation switched-capacitor ADC
Process Technology — BiCMOS
Unipolar Input Range 1 — 0 V to 5 V
Unipolar Input Range 2 — 0 V to 4 V
Bipolar Input Range 1 — -5 V to +5 V
Bipolar Input Range 2 — -3.3 V to +3.3 V
Maximum Power Dissipation — 100 mW
Power-Down Mode — Supported
Factory Calibration — Yes
इंटरफ़ेस — High-speed serial interface
Analog Input Type — [DATA_NEEDED: analog input type]
Input Impedance — [DATA_NEEDED: input impedance]
SNR — [DATA_NEEDED: signal-to-noise ratio]
THD — [DATA_NEEDED: total harmonic distortion]
ENOB — [DATA_NEEDED: effective number of bits]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध