AD977ANZ vs AD977AN So sánh

So sánh chi tiết song song của AD977ANZ bằng Analog Devices và AD977AN bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD977ANZ AD977ANZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ANZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ANZ ✓ Hoạt động
Analog Devices
AD977AN AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices

AD977AN ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số AD977ANZ AD977AN
Thương hiệu Analog Devices Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Hoạt động Hoạt động
Converter Type Successive-approximation ADC —
Độ phân giải 16 bit 16 bit
Throughput Rate 100 kSPS —
Input Architecture Single-ended, 1 input —
Điện áp cung cấp 5 V 5 V
Internal Reference 2.5 V 2.5 V
Output Interface Serial —
ADC Architecture Switched-capacitor SAR —
Hộp 20-pin PDIP 20-pin PDIP
Kiểu lắp đặt Through-hole Through-hole
Temperature Grade Industrial —
Power Consumption [DATA_NEEDED: power consumption] —
Analog Input Range [DATA_NEEDED: analog input range] —
Input Resistance [DATA_NEEDED: input resistance] —
Integral Nonlinearity [DATA_NEEDED: integral nonlinearity] —
Offset Error [DATA_NEEDED: offset error] —
Gain Error [DATA_NEEDED: gain error] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Conversion Throughput — 100 kSPS
Analog Input Count — 1 input
Architecture — Successive-approximation switched-capacitor ADC
Process Technology — BiCMOS
Unipolar Input Range 1 — 0 V to 5 V
Unipolar Input Range 2 — 0 V to 4 V
Bipolar Input Range 1 — -5 V to +5 V
Bipolar Input Range 2 — -3.3 V to +3.3 V
Maximum Power Dissipation — 100 mW
Power-Down Mode — Supported
Factory Calibration — Yes
Giao diện — High-speed serial interface
Analog Input Type — [DATA_NEEDED: analog input type]
Input Impedance — [DATA_NEEDED: input impedance]
SNR — [DATA_NEEDED: signal-to-noise ratio]
THD — [DATA_NEEDED: total harmonic distortion]
ENOB — [DATA_NEEDED: effective number of bits]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá