AD977ANZ vs AD977AN 比較
詳細並排比較 AD977ANZ 由 Analog Devices 與 AD977AN 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD977ANZ | AD977AN |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Converter Type | Successive-approximation ADC | — |
| 解析度 | 16 bit | 16 bit |
| Throughput Rate | 100 kSPS | — |
| Input Architecture | Single-ended, 1 input | — |
| 供應電壓 | 5 V | 5 V |
| Internal Reference | 2.5 V | 2.5 V |
| Output Interface | Serial | — |
| ADC Architecture | Switched-capacitor SAR | — |
| 封裝 | 20-pin PDIP | 20-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| Temperature Grade | Industrial | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Analog Input Range | [DATA_NEEDED: analog input range] | — |
| Input Resistance | [DATA_NEEDED: input resistance] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Offset Error | [DATA_NEEDED: offset error] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Conversion Throughput | — | 100 kSPS |
| Analog Input Count | — | 1 input |
| Architecture | — | Successive-approximation switched-capacitor ADC |
| Process Technology | — | BiCMOS |
| Unipolar Input Range 1 | — | 0 V to 5 V |
| Unipolar Input Range 2 | — | 0 V to 4 V |
| Bipolar Input Range 1 | — | -5 V to +5 V |
| Bipolar Input Range 2 | — | -3.3 V to +3.3 V |
| Maximum Power Dissipation | — | 100 mW |
| Power-Down Mode | — | Supported |
| Factory Calibration | — | Yes |
| 介面 | — | High-speed serial interface |
| Analog Input Type | — | [DATA_NEEDED: analog input type] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| SNR | — | [DATA_NEEDED: signal-to-noise ratio] |
| THD | — | [DATA_NEEDED: total harmonic distortion] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |