ADE9153A vs ADE9153AACPZ तुलना
विस्तृत दोनों ओर की तुलना ADE9153A द्वारा Analog Devices और ADE9153AACPZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADE9153A - Single-Phase Energy Metering IC, mSure Autocalibration | Analog Devices
ADE9153A ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADE9153A | ADE9153AACPZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Battery Management | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Single-Phase Energy Metering IC with mSure Autocalibration | Single-phase energy metering IC |
| Number of ADCs | 3 (high-performance 24-bit sigma-delta) | — |
| Signal-to-Noise Ratio (SNR) | 88 dB | — |
| Current Sensor | Shunt resistor (no CT required) | — |
| Active Energy Accuracy | [DATA_NEEDED: active energy accuracy over dynamic range] | — |
| Measurements | Active energy, fundamental reactive energy, apparent energy, RMS voltage and RMS current | — |
| Power Quality Metrics | Supported per datasheet (specific metrics [DATA_NEEDED]) | — |
| Autocalibration | mSure (no reference source or reference meter required) | mSure automatic current- and voltage-channel calibration |
| Host Interfaces | SPI and I2C | — |
| पैकेज | 32-LFCSP (5x5 mm), suffix ACPZ | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C (industrial) | [DATA_NEEDED: operating temperature range] |
| सप्लाई वोल्टेज | [DATA_NEEDED: AVDD/DVDD typical] | — |
| Lead Finish / RoHS | [DATA_NEEDED: lead finish] | — |
| Datasheet Revision | Rev. 0 | — |
| Datasheet Page Count | 50 pages (per third-party datasheet repository) | — |
| Evaluation Kit | EV-ADE9153ASHIELDZ (Arduino shield compatible with Uno, Zero, ESP8266) | — |
| Reference Manual | ADE9153A Technical Reference Manual UG-1247 | — |
| Metering Phase | — | 1 phase |
| Calibration Method | — | Full signal-path measurement without an accurate source or accurate reference meter when a shunt resistor is used |
| Supported Meter Classes | — | Class 1 and Class 2 |
| Current-Sensing Method | — | Shunt-based |
| Package Type | — | 32-LFCSP (5 mm x 5 mm) |
| Lead Count | — | 32 leads |
| माउंटिंग प्रकार | — | Surface mount |
| ADC Resolution | — | [DATA_NEEDED: ADC resolution] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Digital Interface | — | [DATA_NEEDED: digital interface] |
| Voltage-Channel Range | — | [DATA_NEEDED: voltage-channel input range] |
| Current-Channel Range | — | [DATA_NEEDED: current-channel input range] |
| Energy Accuracy | — | [DATA_NEEDED: energy accuracy] |
| Moisture Sensitivity Level | — | MSL 3 (168 hours) |
| RoHS स्थिति | — | ROHS3 compliant |
| REACH Status | — | Unaffected |
| Lifecycle Recommendation | — | Recommended for new designs |