ADM3485EAR vs ADM3491EARZ तुलना

विस्तृत दोनों ओर की तुलना ADM3485EAR द्वारा Analog Devices और ADM3491EARZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM3485EAR ADM3485EAR - 12 Mbps 3.3 V RS-485 Transceiver | Analog Devices

ADM3485EAR - 12 Mbps 3.3 V RS-485 Transceiver | Analog Devices

ADM3485EAR ✓ सक्रिय
Analog Devices
ADM3491EARZ ADM3491EARZ - 3.3V Full-Duplex RS-485/RS-422 Transceiver | Analog Devices

ADM3491EARZ - 3.3V Full-Duplex RS-485/RS-422 Transceiver | Analog Devices

ADM3491EARZ ⚠ अंतिम खरीद

विशेषता तुलना

पैरामीटर ADM3485EAR ADM3491EARZ
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface Transceivers
लाइफसाइकिल स्थिति सक्रिय अंतिम बार खरीदें
सप्लाई वोल्टेज 3.3 V 3.3 V
डेटा दर 12 Mbps —
ESD Protection ±15 kV ±15 kV
Protocol Support TIA/EIA RS-485 and RS-422 —
Duplex Mode Half-duplex Full duplex
Driver Count 1 driver —
Receiver Count 1 receiver —
Maximum Bus Nodes 32 nodes —
Receiver Fail-Safe Behavior Open-circuit fail-safe design —
Low-Power Shutdown Supported —
Bus Configuration Multipoint differential bus Multipoint bus transmission line
पैकेज 8-pin SOIC 14-pin SOIC, 3.90 mm width
माउंटिंग प्रकार Surface mount Surface mount
Operating Voltage [DATA_NEEDED: operating voltage range] —
सप्लाई करंट [DATA_NEEDED: supply current] [DATA_NEEDED: operating supply current]
शटडाउन करंट [DATA_NEEDED: shutdown current] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] [DATA_NEEDED: receiver common-mode voltage range]
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] Compliant
Interface Standard — TIA/EIA RS-485 and TIA/EIA RS-422
Transceiver Configuration — 1 transmitter and 1 receiver
Maximum Data Rate — 12 Mbps
Low-Power Operation — Low-power transceiver with shutdown mode
Supply Architecture — Single +3.3 V supply
Driver Enable Control — DE/RE control
Shutdown Supply Current — [DATA_NEEDED: shutdown supply current]
Differential Output Voltage — [DATA_NEEDED: differential driver output voltage]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Halogen-Free Status — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध