ADM3485EAR vs ADM3491EARZ 比較
詳細並排比較 ADM3485EAR 由 Analog Devices 與 ADM3491EARZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Analog Devices
ADM3491EARZ - 3.3V Full-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM3491EARZ ⚠ 最後購買機會規格比較
| 參數 | ADM3485EAR | ADM3491EARZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface Transceivers |
| 生命週期狀態 | 啟用中 | 最後購買 |
| 供應電壓 | 3.3 V | 3.3 V |
| 資料速率 | 12 Mbps | — |
| ESD Protection | ±15 kV | ±15 kV |
| Protocol Support | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | Full duplex |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Bus Nodes | 32 nodes | — |
| Receiver Fail-Safe Behavior | Open-circuit fail-safe design | — |
| Low-Power Shutdown | Supported | — |
| Bus Configuration | Multipoint differential bus | Multipoint bus transmission line |
| 封裝 | 8-pin SOIC | 14-pin SOIC, 3.90 mm width |
| 安裝類型 | Surface mount | Surface mount |
| Operating Voltage | [DATA_NEEDED: operating voltage range] | — |
| 供應電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| 關機電流 | [DATA_NEEDED: shutdown current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: receiver common-mode voltage range] |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Compliant |
| Interface Standard | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Maximum Data Rate | — | 12 Mbps |
| Low-Power Operation | — | Low-power transceiver with shutdown mode |
| Supply Architecture | — | Single +3.3 V supply |
| Driver Enable Control | — | DE/RE control |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |
| Differential Output Voltage | — | [DATA_NEEDED: differential driver output voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Halogen-Free Status | — | Compliant |