ADM3485EAR vs ADM3491EARZ Perbandingan
Perbandingan bersamaan detil ADM3485EAR dari Analog Devices dan ADM3491EARZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM3491EARZ - 3.3V Full-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM3491EARZ ⚠ Waktu Beli TerakhirPerbandingan Spesifikasi
| Parameter Umum | ADM3485EAR | ADM3491EARZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface Transceivers |
| Status Lingkungan Hidup | Aktif | Waktu Pembelian Terakhir |
| Tegangan Pemuat | 3.3 V | 3.3 V |
| Laju Data | 12 Mbps | — |
| ESD Protection | ±15 kV | ±15 kV |
| Protocol Support | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | Full duplex |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Maximum Bus Nodes | 32 nodes | — |
| Receiver Fail-Safe Behavior | Open-circuit fail-safe design | — |
| Low-Power Shutdown | Supported | — |
| Bus Configuration | Multipoint differential bus | Multipoint bus transmission line |
| Paket | 8-pin SOIC | 14-pin SOIC, 3.90 mm width |
| Tipe Mounting | Surface mount | Surface mount |
| Operating Voltage | [DATA_NEEDED: operating voltage range] | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | [DATA_NEEDED: operating supply current] |
| Arus Menutup | [DATA_NEEDED: shutdown current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: receiver common-mode voltage range] |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Compliant |
| Interface Standard | — | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Maximum Data Rate | — | 12 Mbps |
| Low-Power Operation | — | Low-power transceiver with shutdown mode |
| Supply Architecture | — | Single +3.3 V supply |
| Driver Enable Control | — | DE/RE control |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |
| Differential Output Voltage | — | [DATA_NEEDED: differential driver output voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Halogen-Free Status | — | Compliant |