ADP5585ACBZ-00-R7 vs PCA9557D तुलना

विस्तृत दोनों ओर की तुलना ADP5585ACBZ-00-R7 द्वारा Analog Devices और PCA9557D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADP5585ACBZ-00-R7 ADP5585ACBZ-00-R7 - 10 I/O Keypad Controller | Analog Devices

ADP5585ACBZ-00-R7 - 10 I/O Keypad Controller | Analog Devices

ADP5585ACBZ-00-R7 Unknown
Texas Instruments
PCA9557D PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D ✗ जीवन की समाप्ति

विशेषता तुलना

पैरामीटर ADP5585ACBZ-00-R7 PCA9557D
ब्रांड Analog Devices Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति Unknown उत्पादन बंद
Device Type 10-I/O port expander with keypad matrix decoder —
Number of Configurable I/Os 10 I/Os —
इंटरफ़ेस I2C I2C, SMBus
I2C Maximum Frequency 1 MHz —
Supply Voltage Range 1.65 V to 3.6 V —
Keypad Matrix Support Up to 6 × 5 matrix with ADP5585ACBZ-01-R7 or ADP5585ACPZ-01-R7 option —
FIFO 16-element FIFO for event recording —
Programmable Logic Supported —
Reset Generator Supported —
PWM Generator Supported —
Interface Width 8-bit —
पैकेज 16-WLCSP (1.59 mm × 1.59 mm) 16-SOIC (DR, 7.5 mil pitch)
Package Type Wafer-level chip-scale package —
Application Category Keypad entries and I/O expansion —
Portable Device Suitability Phones, remote controls, and cameras —
Nonportable Device Suitability Healthcare, industrial, and instrumentation applications —
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Automotive AEC-Q100 Status [DATA_NEEDED: AEC-Q100 status] —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] -40 C to +85 C
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] —
Pinout [DATA_NEEDED: complete pin names and functions] —
Number of I/O Bits — 8
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
माउंटिंग प्रकार — Surface Mount
MSL स्तर — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध