ADP5585ACBZ-00-R7 vs PCA9557D So sánh

So sánh chi tiết song song của ADP5585ACBZ-00-R7 bằng Analog Devices và PCA9557D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADP5585ACBZ-00-R7 ADP5585ACBZ-00-R7 - 10 I/O Keypad Controller | Analog Devices

ADP5585ACBZ-00-R7 - 10 I/O Keypad Controller | Analog Devices

ADP5585ACBZ-00-R7 Unknown
Texas Instruments
PCA9557D PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D ✗ Cuối đời

So sánh thông số kỹ thuật

Tham số ADP5585ACBZ-00-R7 PCA9557D
Thương hiệu Analog Devices Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Unknown Cuối chu kỳ cuộc sống
Device Type 10-I/O port expander with keypad matrix decoder —
Number of Configurable I/Os 10 I/Os —
Giao diện I2C I2C, SMBus
I2C Maximum Frequency 1 MHz —
Supply Voltage Range 1.65 V to 3.6 V —
Keypad Matrix Support Up to 6 × 5 matrix with ADP5585ACBZ-01-R7 or ADP5585ACPZ-01-R7 option —
FIFO 16-element FIFO for event recording —
Programmable Logic Supported —
Reset Generator Supported —
PWM Generator Supported —
Interface Width 8-bit —
Hộp 16-WLCSP (1.59 mm × 1.59 mm) 16-SOIC (DR, 7.5 mil pitch)
Package Type Wafer-level chip-scale package —
Application Category Keypad entries and I/O expansion —
Portable Device Suitability Phones, remote controls, and cameras —
Nonportable Device Suitability Healthcare, industrial, and instrumentation applications —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Automotive AEC-Q100 Status [DATA_NEEDED: AEC-Q100 status] —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 C to +85 C
Điện áp cung cấp [DATA_NEEDED: typical and maximum supply current] —
Pinout [DATA_NEEDED: complete pin names and functions] —
Number of I/O Bits — 8
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
Kiểu lắp đặt — Surface Mount
Cấp MSL — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá