ATMEGA329V-8AI vs ATMEGA329P-20AU तुलना
विस्तृत दोनों ओर की तुलना ATMEGA329V-8AI द्वारा Microchip Technology और ATMEGA329P-20AU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA329V-8AI - 8-bit AVR MCU 32KB Flash LCD | Microchip
ATMEGA329V-8AI ✓ सक्रियMicrochip Technology
ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64
ATMEGA329P-20AU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA329V-8AI | ATMEGA329P-20AU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | AVR (8-bit RISC, Harvard) |
| CPU Speed | 8 MHz | — |
| Program Memory (Flash) | 32 KB (16K x 16) | 32 KB (16K x 16), In-System Programmable with RWW |
| SRAM | 2 KB | 2 KB (2K x 8) |
| EEPROM | 1 KB | 1 KB |
| Supply Voltage (Vcc) | 1.8 V to 5.5 V | 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) |
| General Purpose I/O | 54 lines | — |
| General Purpose Registers | 32 | — |
| LCD Controller | On-chip, supports up to 4x25 segments | — |
| ADC | 10-bit, up to 8 channels | 10-bit, up to 8 single-ended channels |
| Timers/Counters | Three flexible Timer/Counters with PWM | — |
| Serial Interfaces | USART, SPI, TWI (I2C-compatible) | — |
| Debug Interface | JTAG (IEEE 1149.1 compliant) | JTAG (IEEE 1149.1 compliant) |
| पैकेज | 64-pin TQFP, 14x14 mm body, 0.5 mm pitch | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | -40C to +85C (industrial, -A suffix) |
| RoHS स्थिति | Compliant | Compliant (Pb-free / Green) |
| Instruction Set | — | 131 instructions, mostly single-cycle |
| Maximum Clock Speed | — | 20 MHz |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| General-Purpose I/O Pins | — | 54 |
| General-Purpose Working Registers | — | 32 |
| PWM Channels | — | 6 |
| Communication Peripherals | — | 2x USART, 1x TWI (I2C), 1x SPI (also ISP) |
| Power-Save Modes | — | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) |
| QTouch Support | — | Yes (peripheral touch controller via library) |