ATMEGA329V-8AI vs ATMEGA329P-20AU Karşılaştırma

Ayrıntılı yan yana karşılaştırma ATMEGA329V-8AI tarafından Microchip Technology ve ATMEGA329P-20AU tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
ATMEGA329V-8AI ATMEGA329V-8AI - 8-bit AVR MCU 32KB Flash LCD | Microchip

ATMEGA329V-8AI - 8-bit AVR MCU 32KB Flash LCD | Microchip

ATMEGA329V-8AI ✓ Aktif
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Aktif

Özellik Karşılaştırması

Parametre ATMEGA329V-8AI ATMEGA329P-20AU
Marka Microchip Technology Microchip Technology
Kategori Microcontrollers Microcontrollers
Yaşam Döngüsü Durumu Aktif Aktif
Core Architecture 8-bit AVR RISC AVR (8-bit RISC, Harvard)
CPU Speed 8 MHz —
Program Memory (Flash) 32 KB (16K x 16) 32 KB (16K x 16), In-System Programmable with RWW
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
Supply Voltage (Vcc) 1.8 V to 5.5 V 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General Purpose I/O 54 lines —
General Purpose Registers 32 —
LCD Controller On-chip, supports up to 4x25 segments —
ADC 10-bit, up to 8 channels 10-bit, up to 8 single-ended channels
Timers/Counters Three flexible Timer/Counters with PWM —
Serial Interfaces USART, SPI, TWI (I2C-compatible) —
Debug Interface JTAG (IEEE 1149.1 compliant) JTAG (IEEE 1149.1 compliant)
Paket 64-pin TQFP, 14x14 mm body, 0.5 mm pitch 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Montaj Türü Surface Mount Surface Mount
İşletim Sıcaklığı -40C to +85C (industrial) -40C to +85C (industrial, -A suffix)
RoHS Durumu Compliant Compliant (Pb-free / Green)
Instruction Set — 131 instructions, mostly single-cycle
Maximum Clock Speed — 20 MHz
Throughput — Up to 20 MIPS at 20 MHz
General-Purpose I/O Pins — 54
General-Purpose Working Registers — 32
PWM Channels — 6
Communication Peripherals — 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Power-Save Modes — Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support — Yes (peripheral touch controller via library)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin