ATSAM4S8BA-AN vs ATSAM4SD16CA-AUR तुलना
विस्तृत दोनों ओर की तुलना ATSAM4S8BA-AN द्वारा Microchip Technology और ATSAM4SD16CA-AUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4S8BA-AN - SAM4S 120MHz Cortex-M4 MCU 512KB | Microchip
ATSAM4S8BA-AN ✓ सक्रियMicrochip Technology
ATSAM4SD16CA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
ATSAM4SD16CA-AUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4S8BA-AN | ATSAM4SD16CA-AUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4 with FPU | — |
| Operating Frequency | 120 MHz | — |
| Flash Memory | 512 KB | — |
| SRAM | 128 KB | 160 KB |
| Supply Voltage (VDDIO) | 3.0 V to 3.6 V | — |
| Operating Voltage Range (with internal regulator) | 1.62 V to 3.6 V | — |
| Active Power Consumption | 200 uA/MHz | — |
| पैकेज | 64-LQFP (10x10 mm) | 100-pin LQFP (14x14 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount (Tape & Reel) |
| पिन काउंट | 64 | — |
| I/O Pins | [DATA_NEEDED: number of GPIO pins for LQFP-64 variant] | — |
| ADC | 12-bit, up to 1 Msps | 12-bit, up to 24 channels (per datasheet family) |
| DAC | 12-bit | — |
| USB | USB 2.0 Full-Speed Device with on-chip PHY | — |
| ऑपरेटिंग तापमान | -40C to +85C | -40 C to +85 C (industrial) |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free | Yes | — |
| Pin-to-Pin Compatible Family | SAM7S, SAM3N, SAM3S | — |
| Core Architecture | — | ARM Cortex-M4 with DSP extensions and Thumb-2 |
| CPU Frequency | — | 120 MHz maximum |
| Program Memory (Flash) | — | 1 MB (2 x 512 KB dual-bank) |
| Instruction Cache | — | 2 KB |
| MPU (Memory Protection Unit) | — | Yes |
| सप्लाई वोल्टेज | — | 1.62 V to 3.6 V |
| USB Interface | — | USB 2.0 Full-Speed with on-chip transceiver |
| Timers | — | Multiple 16/32-bit timer/counter channels with PWM |
| Communication Interfaces | — | 5x USART, 2x UART, 2x TWI (I2C), 2x SPI, 1x HS-SPI |
| MSL स्तर | — | MSL3 (per LQFP moisture classification) |
| Recommended Die Revision for New Designs | — | Revision B (use ATSAM4SD16CB-AUR / -CFUR variants) |