ATSAME54-XPRO vs ATSAME54P20A-AFT तुलना
विस्तृत दोनों ओर की तुलना ATSAME54-XPRO द्वारा Microchip Technology और ATSAME54P20A-AFT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ सक्रियMicrochip Technology
ATSAME54P20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54P20A-AFT ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAME54-XPRO | ATSAME54P20A-AFT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Evaluation Kit / Development Board | — |
| Target MCU | ATSAME54P20A | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP extensions) | — |
| Core Architecture | 32-bit RISC | ARM Cortex-M4F with single-precision FPU |
| Maximum Clock Speed | 120 MHz | — |
| Flash Memory | 1 MB dual-panel Flash with ECC (on target MCU) | 1 MB (dual-panel with ECC) |
| SRAM | 256 KB with ECC (on target MCU) | 256 KB (with ECC) |
| Embedded Debugger | Atmel EDBG (onboard, no external probe required) | — |
| Debug Interfaces | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) | — |
| Main Crystal | 12 MHz | — |
| Backup Crystal | 32.768 kHz (RTC reference) | — |
| Backup Power | Supercapacitor for RTC retention | — |
| CAN Transceiver | ATA6561 (CAN-FD capable) | — |
| Extension Headers | 2x Xplained Pro extension headers, mikroBUS socket | — |
| Capture Interface | Parallel Capture Controller (ArduCAM compatible) header | — |
| USB Interfaces | USB-C debug (EDBG), USB-C micro-B device | — |
| Operating System Support | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 | — |
| RoHS स्थिति | Compliant | Compliant |
| Maximum CPU Clock | — | 120 MHz |
| पैकेज | — | 128-pin TQFP (14x14 mm) |
| Supply Voltage (VDDIO) | — | 3.3 V typical |
| Ethernet | — | 10/100 Mbps MAC with IEEE 1588 |
| USB | — | USB 2.0 Full-Speed with on-chip PHY |
| CAN | — | 2x CAN-FD controllers |
| ADC | — | 12-bit, up to 1 Msps |
| ऑपरेटिंग तापमान | — | -40C to +125C (extended) |
| माउंटिंग प्रकार | — | Surface Mount |
| MSL स्तर | — | 3 (168 hours) |
| Supply Form | — | Tape & Reel (T&R) |