BTG70902EPLXUMA1 vs BTG7003A1EPWXUMA2 तुलना

विस्तृत दोनों ओर की तुलना BTG70902EPLXUMA1 द्वारा Infineon और BTG7003A1EPWXUMA2 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTG70902EPLXUMA1 BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon

BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon

BTG70902EPLXUMA1 ✓ सक्रिय
Infineon
BTG7003A1EPWXUMA2 BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon

BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon

BTG7003A1EPWXUMA2 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTG70902EPLXUMA1 BTG7003A1EPWXUMA2
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Family PROFET+2 12V —
फ़ंक्शन Smart High-Side Power Switch —
Number of Channels 1 1
Input-to-Output Ratio 1:1 —
आउटपुट कॉन्फ़िगरेशन N-Channel High-Side —
Continuous Load Current 2 A —
Nominal Operating Voltage 12 V (automotive bus) —
Operating Voltage Range [DATA_NEEDED: Vbb operating range min/max] 6 V to 18 V
On-State Resistance (Ron) [DATA_NEEDED: Rdson typ/max in mohm] —
करंट लिमिट Fixed (value not specified in retrieved data) —
Protection Features Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery —
Diagnostic Output DEN pin (current sense / fault flag) —
Enable Input IN pin (active-high) —
Channel Select DSEL pin —
Slew Rate Control Yes (internal, for EMI) —
पैकेज PG-TSDSO-14 (exposed pad) PG-TSDSO-14-22 (exposed pad)
ऑपरेटिंग जंक्शन तापमान -40 C to +150 C —
Automotive Qualification AEC-Q100 (PROFET+2 family targeted at automotive) —
RoHS स्थिति Compliant Compliant
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL rating per JEDEC J-STD-020] —
Switch Type — High-Side Power Switch
Configuration — 1:1 N-Channel
Maximum Continuous Load Current — 15.7 A
Load Dump Tolerance — 40 V
Idle Mode Quiescent Current — 50 µA
On-Resistance R_DS(on) — 10 mΩ (typ)
Control Input — Active High
Wire Protection — Integrated I²t
Functional Safety — ISO 26262 compliant
ऑपरेटिंग तापमान — -40C to +150C (TJ)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध