BTG70902EPLXUMA1 vs BTG7003A1EPWXUMA2 Perbandingan
Perbandingan bersamaan detil BTG70902EPLXUMA1 dari Infineon dan BTG7003A1EPWXUMA2 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktifInfineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTG70902EPLXUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Family | PROFET+2 12V | — |
| Fungsi | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Input-to-Output Ratio | 1:1 | — |
| Konfigurasi Output | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | 6 V to 18 V |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Batas Arus | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Paket | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| Suhu Hubung Kerja | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| Status RoHS | Compliant | Compliant |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Switch Type | — | High-Side Power Switch |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |
| Suhu Kerja | — | -40C to +150C (TJ) |