BTG70902EPLXUMA1 vs BTG7003A1EPWXUMA2 比較
詳細並排比較 BTG70902EPLXUMA1 由 Infineon 與 BTG7003A1EPWXUMA2 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ 啟用中Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ 啟用中規格比較
| 參數 | BTG70902EPLXUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Family | PROFET+2 12V | — |
| 功能 | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 1 |
| Input-to-Output Ratio | 1:1 | — |
| 輸出配置 | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | 6 V to 18 V |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| 電流限制 | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| 封裝 | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| 工作接面溫度 | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| RoHS 狀態 | Compliant | Compliant |
| 安裝類型 | Surface Mount | Surface Mount |
| MSL 等級 | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Switch Type | — | High-Side Power Switch |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |
| 工作溫度 | — | -40C to +150C (TJ) |