BTS3046SDRATMA1 vs ITS4100SSJNXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3046SDRATMA1 द्वारा Infineon और ITS4100SSJNXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3046SDRATMA1 BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 - 3.6A Smart Low-Side Switch HITFET | Infineon

BTS3046SDRATMA1 ✓ सक्रिय
Infineon
ITS4100SSJNXUMA1 ITS4100SSJNXUMA1 - 2A Smart High-Side Power Switch | Infineon

ITS4100SSJNXUMA1 - 2A Smart High-Side Power Switch | Infineon

ITS4100SSJNXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3046SDRATMA1 ITS4100SSJNXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart Low-Side Power Switch (HITFET family) High-Side Power Switch
Manufacturer Infineon Technologies —
Switch Configuration 1:1 N-Channel, single channel —
Continuous Output Current 3.6 A —
On-State Resistance (Rds(on)) 95 mOhm (0.095 ohm) typical —
Operating Voltage Range (Vbb) 4.5 V to 42 V —
Load Type Low-side switch (ground-referenced load) —
पैकेज PG-TO252-3-11 (DPAK, 3-pin with tab) PG-DSO-8 (exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज -40 C to +150 C [DATA_NEEDED: Tj range]
Protection Features Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD —
Input Logic CMOS-compatible with internal pull-down —
Status Feedback Yes (status output pin) —
Automotive Qualification AEC-Q100 (where variant specified) —
RoHS / Lead-Free Compliant / Yes —
टोपोलॉजी — 1:1 N-Channel High-Side
Maximum Continuous Load Current — 2 A
On-State Resistance RDS(on) — [DATA_NEEDED: RDS(on) typical value]
Operating Supply Voltage Range — [DATA_NEEDED: VBB min/max]
Overvoltage Protection (Load Dump) — Yes
Overload Protection — Yes
Current Limitation — Yes
Short Circuit Protection — Yes
Thermal Shutdown with Restart — Yes
Reverse Battery Protection — Yes
Fast Demagnetization of Inductive Loads — Yes
Status / Diagnostic Output — Yes
RoHS स्थिति — Compliant
AEC-Q100 Qualification — Yes (Automotive Grade)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध