BTS3125TFATMA1 vs BTS3050TFATMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS3125TFATMA1 द्वारा Infineon और BTS3050TFATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS3125TFATMA1 BTS3125TFATMA1 - 2A N-Channel Smart Power Switch | Infineon

BTS3125TFATMA1 - 2A N-Channel Smart Power Switch | Infineon

BTS3125TFATMA1 ✓ सक्रिय
Infineon
BTS3050TFATMA1 BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS3125TFATMA1 BTS3050TFATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Single-channel N-channel low-side smart power switch —
Load Current (continuous) 2 A —
Load Current (pulsed) [DATA_NEEDED: pulsed drain current limit] —
RDS(on) typical 250 mΩ at 5 V Vbb —
Supply Voltage (Vbb, nominal) 5 V —
Supply Voltage (Vbb, operating) 5 V to 28 V —
Load Dump Transient Protection 40 V —
Input Logic Compatibility 3.3 V / 5 V CMOS —
On-State Resistance (max) [DATA_NEEDED: maximum RDS(on) over temp] —
थर्मल रेज़िस्टेंस, जंक्शन-टू-एम्बिएंट [DATA_NEEDED: theta_JA value] —
ऑपरेटिंग तापमान रेंज -40°C to +150°C —
Over-temperature Shutdown ~150°C with auto-restart —
Short-Circuit Protection Yes, current-limited —
Over-voltage Protection Yes (clamping at 40 V) —
ESD Protection Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) —
Status Flag Output Yes (fault feedback) —
पैकेज PG-TO252-3-313 (DPAK, SC-63) PG-TO252-3-313 (TO-252 / DPAK)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर [DATA_NEEDED: MSL moisture sensitivity level] —
RoHS स्थिति Compliant —
Part Number — BTS3050TFATMA1
Manufacturer — Infineon Technologies
Product Family — HITFET Smart Low-Side Switch
Switch Type — N-Channel Low-Side Smart Power Switch
आउटपुट की संख्या — 1
RDS(on) (typ) — 44 mOhm at 25 C
Continuous Drain Current — 4 A
Load Voltage (max) — 5.5 V
Logic Input — CMOS compatible, logic-level
Status Output — Yes (fault feedback)
Protection Features — Over-current, Over-temperature, Over-voltage, ESD
ऑपरेटिंग तापमान — -40 C to +150 C (junction)
AEC-Q100 — Qualified
RoHS — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध