BTS3125TFATMA1 vs BTS3050TFATMA1 So sánh

So sánh chi tiết song song của BTS3125TFATMA1 bằng Infineon và BTS3050TFATMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS3125TFATMA1 BTS3125TFATMA1 - 2A N-Channel Smart Power Switch | Infineon

BTS3125TFATMA1 - 2A N-Channel Smart Power Switch | Infineon

BTS3125TFATMA1 ✓ Hoạt động
Infineon
BTS3050TFATMA1 BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS3125TFATMA1 BTS3050TFATMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Single-channel N-channel low-side smart power switch —
Load Current (continuous) 2 A —
Load Current (pulsed) [DATA_NEEDED: pulsed drain current limit] —
RDS(on) typical 250 mΩ at 5 V Vbb —
Supply Voltage (Vbb, nominal) 5 V —
Supply Voltage (Vbb, operating) 5 V to 28 V —
Load Dump Transient Protection 40 V —
Input Logic Compatibility 3.3 V / 5 V CMOS —
On-State Resistance (max) [DATA_NEEDED: maximum RDS(on) over temp] —
Kháng nhiệt, mối nối đến môi trường [DATA_NEEDED: theta_JA value] —
Khoảng nhiệt độ hoạt động -40°C to +150°C —
Over-temperature Shutdown ~150°C with auto-restart —
Short-Circuit Protection Yes, current-limited —
Over-voltage Protection Yes (clamping at 40 V) —
ESD Protection Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) —
Status Flag Output Yes (fault feedback) —
Hộp PG-TO252-3-313 (DPAK, SC-63) PG-TO252-3-313 (TO-252 / DPAK)
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL [DATA_NEEDED: MSL moisture sensitivity level] —
Trạng thái RoHS Compliant —
Part Number — BTS3050TFATMA1
Manufacturer — Infineon Technologies
Product Family — HITFET Smart Low-Side Switch
Switch Type — N-Channel Low-Side Smart Power Switch
Số lượng đầu ra — 1
RDS(on) (typ) — 44 mOhm at 25 C
Continuous Drain Current — 4 A
Load Voltage (max) — 5.5 V
Logic Input — CMOS compatible, logic-level
Status Output — Yes (fault feedback)
Protection Features — Over-current, Over-temperature, Over-voltage, ESD
Nhiệt độ hoạt động — -40 C to +150 C (junction)
AEC-Q100 — Qualified
RoHS — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá