BTS700121ESPXUMA2 vs BTS70041EPPXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS700121ESPXUMA2 द्वारा Infineon और BTS70041EPPXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS700121ESPXUMA2 BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon

BTS700121ESPXUMA2 - 31.3A Smart High-Side Power Switch | Infineon

BTS700121ESPXUMA2 ✓ सक्रिय
Infineon
BTS70041EPPXUMA1 BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon

BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon

BTS70041EPPXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS700121ESPXUMA2 BTS70041EPPXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Power Switch / Driver 1:1 N-Channel —
टोपोलॉजी High-Side —
Continuous Load Current 31.3 A —
Family PROFET (Protected FET) —
Nominal Supply Voltage 13.5 V —
Operating Voltage Range [DATA_NEEDED: Vbb operating range] [DATA_NEEDED: operating voltage range]
On-State Resistance (Ron) [DATA_NEEDED: Ron typ @ 25 C] —
Number of Channels 1 —
पैकेज PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) PG-TSDSO-14-22 (14-pin)
Number of Terminals 24 —
Terminal Pitch 0.65 mm —
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज -40 C to +150 C —
Max Junction Temperature 150 C —
Protection Features Overload, short-circuit, over-temperature, reverse battery, ground loss —
Diagnostic Output Analog current sense (IS pin) —
Open-Load Detection Yes (on-state and off-state) —
RoHS स्थिति Compliant Compliant
Part Family — HIC-PROFET +2 12V
Switch Type — High-Side N-Channel Smart Power Switch
Typical R_DS(on) — 4 mOhm at 25 °C
Nominal Load Current — 15 A (DC)
Load-Dump Robustness — [DATA_NEEDED: load dump rating]
Input Logic Compatibility — 3.3 V and 5 V CMOS
Diagnostic Enable Pin (DEN) — Yes
Current Sense Output (IS) — Yes (analog proportional to load current)
Embedded Protection — Over-current, short-circuit, over-temperature, reverse battery
PWM Capability — Yes (low-duty cycle supported via integrated charge pump)
ऑपरेटिंग तापमान — -40 °C to +150 °C (junction)
MSL स्तर — MSL3 (per JEDEC J-STD-020)
Automotive Qualification — AEC-Q100 qualified

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध