BTS70081EPRXUMA1 vs BTS70402EPGXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS70081EPRXUMA1 द्वारा Infineon और BTS70402EPGXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS70081EPRXUMA1 BTS70081EPRXUMA1 - 11A Smart High-Side Power Switch | Infineon

BTS70081EPRXUMA1 - 11A Smart High-Side Power Switch | Infineon

BTS70081EPRXUMA1 ✓ सक्रिय
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS70081EPRXUMA1 BTS70402EPGXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Smart High-Side Power Switch (1:1 N-Channel) Smart High-Side Power Switch
आउटपुट की संख्या 1 —
On-State Resistance (R_DS(on) typ) 8 mOhm at 25 C —
Continuous Output Current 11 A —
करंट लिमिट [DATA_NEEDED: typical current limit value] —
Operating Supply Voltage (Vbb) 6 V to 28 V —
Load Dump Tolerance [DATA_NEEDED: load dump peak V] —
Standby Current [DATA_NEEDED: standby Iq typ] —
ऑपरेटिंग तापमान रेंज -40 C to +150 C (junction) -40 °C to +150 °C junction
पैकेज PG-TSDSO-14-22 (TSSOP-EP-14) PG-TSDSO-14 (exposed thermal pad)
पिन काउंट 14 —
माउंटिंग प्रकार Surface Mount Surface Mount
Thermal Resistance R_theta_JA 35 C/W (2s2p 1 oz FR4, per datasheet) —
Diagnostic Features Open-load, short-to-GND, short-to-Vbb, overtemperature, sense current output —
Reverse Battery Protection Yes (integrated) —
Automotive Qualified Yes (AEC-Q100, PG-TSDSO-14-22 automotive grade) —
RoHS Compliance Compliant Compliant
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
Number of Channels — 4
आउटपुट कॉन्फ़िगरेशन — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Protection Features — Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Interface — SPI status register, current-sense feedback
AEC-Q100 Qualification — Qualified (automotive grade)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध