BTT62001ENAXUMA1 vs BTS52001ENAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTT62001ENAXUMA1 द्वारा Infineon और BTS52001ENAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTT62001ENAXUMA1 - 200mΩ 1.5A Smart High-Side Power Switch | Infineon
BTT62001ENAXUMA1 ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | BTT62001ENAXUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| टोपोलॉजी | 1:1 N-Channel High-Side | — |
| On-State Resistance (Ron) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | 1.5 A |
| Operating Voltage Range | 5 V to 48 V | 4.5 V to 28 V (load-dump tolerant) |
| Technology | Smart6 HV (N-channel vertical MOSFET with charge pump) | Smart6 (N-channel vertical MOSFET with charge pump) |
| पैकेज | PG-TDSO-8-31 (DSO-8 with exposed pad) | PG-TDSO-8-31 (Exposed Pad) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Protection Features | Overload, Short-Circuit, Over-Temperature, Over-Voltage, Reverse Battery | — |
| Diagnostic Output | Current Sense (IS) pin | Yes (status feedback) |
| Lamp Drive Capability | 1 × R10W at 24 V or 1 × R5W at 12 V | — |
| ऑपरेटिंग तापमान | -40 °C to +150 °C junction | — |
| MSL स्तर | 2A (4 weeks) | — |
| ECCN | EAR99 | — |
| REACH Status | REACH Unaffected | — |
| Family | — | Classic PROFET 12V |
| Number of Channels | — | 1 |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Nominal Operating Voltage | — | 12 V |
| Input Control | — | Logic-level, active-high |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| ऑपरेटिंग तापमान रेंज | — | -40 °C to +150 °C |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |