BTT62001ENAXUMA1 vs BTS52001ENAXUMA1 Perbandingan
Perbandingan bersamaan detil BTT62001ENAXUMA1 dari Infineon dan BTS52001ENAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTT62001ENAXUMA1 - 200mΩ 1.5A Smart High-Side Power Switch | Infineon
BTT62001ENAXUMA1 ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | BTT62001ENAXUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologi | 1:1 N-Channel High-Side | — |
| On-State Resistance (Ron) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | 1.5 A |
| Operating Voltage Range | 5 V to 48 V | 4.5 V to 28 V (load-dump tolerant) |
| Technology | Smart6 HV (N-channel vertical MOSFET with charge pump) | Smart6 (N-channel vertical MOSFET with charge pump) |
| Paket | PG-TDSO-8-31 (DSO-8 with exposed pad) | PG-TDSO-8-31 (Exposed Pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Protection Features | Overload, Short-Circuit, Over-Temperature, Over-Voltage, Reverse Battery | — |
| Diagnostic Output | Current Sense (IS) pin | Yes (status feedback) |
| Lamp Drive Capability | 1 × R10W at 24 V or 1 × R5W at 12 V | — |
| Suhu Kerja | -40 °C to +150 °C junction | — |
| Level MSL | 2A (4 weeks) | — |
| ECCN | EAR99 | — |
| REACH Status | REACH Unaffected | — |
| Family | — | Classic PROFET 12V |
| Number of Channels | — | 1 |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Nominal Operating Voltage | — | 12 V |
| Input Control | — | Logic-level, active-high |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Rentang Suhu Kerja | — | -40 °C to +150 °C |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |