CP2102N-A01-GQFN28R vs CP2101 तुलना
विस्तृत दोनों ओर की तुलना CP2102N-A01-GQFN28R द्वारा Silicon Labs और CP2101 द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ सक्रियविशेषता तुलना
| पैरामीटर | CP2102N-A01-GQFN28R | CP2101 |
|---|---|---|
| ब्रांड | Silicon Labs | Silicon Labs |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | अंतिम बार खरीदें |
| Product Type | USB to UART Bridge Controller | — |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| डेटा दर | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | [DATA_NEEDED: operating temperature] |
| पैकेज | 28-QFN (5x5 mm) with exposed pad | MLP/QFN-28 (5 x 5 mm) |
| माउंटिंग प्रकार | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| MSL स्तर | MSL3 (per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | Compliant |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| फ़ंक्शन | — | USB to UART Bridge Controller |
| Integrated Transceiver | — | Yes |
| Integrated Oscillator | — | Yes (internal) |
| Integrated EEPROM | — | Yes (programmable) |
| Integrated Voltage Regulator | — | 5 V to 3 V, up to 100 mA |
| UART Data Rate | — | 300 bps to 921.6 kbps |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI (full) |
| Operating Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Regulated Output | — | 3.0 V to 3.6 V (3.3 V typical) |
| Driver Support | — | Windows, macOS, Linux (virtual COM port) |
| Configuration | — | USB bus-powered or self-powered |
| Bus-Powered Capable | — | Yes |