CP2105-F01-GM vs CP2105-F01-GMR तुलना

विस्तृत दोनों ओर की तुलना CP2105-F01-GM द्वारा Silicon Labs और CP2105-F01-GMR द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Silicon Labs
CP2105-F01-GM CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM ✓ सक्रिय
Silicon Labs
CP2105-F01-GMR CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR ✓ सक्रिय

विशेषता तुलना

पैरामीटर CP2105-F01-GM CP2105-F01-GMR
ब्रांड Silicon Labs Silicon Labs
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type USB 2.0 full-speed to dual-UART bridge controller —
USB Interface USB 2.0 full-speed —
UART Channels 2 asynchronous serial data buses 2 asynchronous serial data buses
Modem Control Full modem-control signals —
Integrated USB Transceiver Yes Yes
Integrated Oscillator Yes —
Programmable ROM One-time programmable ROM —
Digital I/O 5 digital I/O pins —
पैकेज 24-QFN, 4 x 4 mm QFN-24, 4 x 4 mm
Package Terminology QFN-24, also described as MLF or MLP in the verified datasheet snippet —
Exposed Pad Exposed pad package indicated by the verified datasheet/distributor descriptions —
Interface Category USB-to-UART interface IC —
Host Connectivity USB host connection —
Legacy Serial Support USB-to-serial bridge for legacy serial designs —
Driver Support Royalty-free drivers identified by Silicon Labs product-page result —
Operating Supply [DATA_NEEDED: operating supply voltage] —
UART Baud Rate [DATA_NEEDED: UART baud-rate range] —
USB Operating Temperature [DATA_NEEDED: operating temperature range] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: automotive qualification status] —
Device Type — USB 2.0 full-speed to dual UART interface bridge
USB Speed — USB 2.0 full speed
सप्लाई वोल्टेज — 1.8 V or 3.3 V
Integrated Clock Generator — Yes
External Crystal Required — No
One-Time Programmable ROM — 296 bytes
Integrated Voltage Regulator — 3.45 V output
Power-On Reset — On-chip
Baud Rate — Programmable
Hardware Flow Control — Supported
Modem Control Signals — Full modem control signals
USB Termination Resistors — Not required; integrated USB transceiver
ऑपरेटिंग तापमान — [DATA_NEEDED: operating temperature range]
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध