CP2105-F01-GM vs CP2105-F01-GMR 比較

詳細な並列比較: CP2105-F01-GM メーカー: Silicon Labs および CP2105-F01-GMR メーカー: Silicon Labs。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Silicon Labs
CP2105-F01-GM CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM ✓ 生産中
Silicon Labs
CP2105-F01-GMR CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR ✓ 生産中

仕様比較

パラメータ CP2105-F01-GM CP2105-F01-GMR
ブランド Silicon Labs Silicon Labs
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type USB 2.0 full-speed to dual-UART bridge controller —
USB Interface USB 2.0 full-speed —
UART Channels 2 asynchronous serial data buses 2 asynchronous serial data buses
Modem Control Full modem-control signals —
Integrated USB Transceiver Yes Yes
Integrated Oscillator Yes —
Programmable ROM One-time programmable ROM —
Digital I/O 5 digital I/O pins —
パッケージ 24-QFN, 4 x 4 mm QFN-24, 4 x 4 mm
Package Terminology QFN-24, also described as MLF or MLP in the verified datasheet snippet —
Exposed Pad Exposed pad package indicated by the verified datasheet/distributor descriptions —
Interface Category USB-to-UART interface IC —
Host Connectivity USB host connection —
Legacy Serial Support USB-to-serial bridge for legacy serial designs —
Driver Support Royalty-free drivers identified by Silicon Labs product-page result —
Operating Supply [DATA_NEEDED: operating supply voltage] —
UART Baud Rate [DATA_NEEDED: UART baud-rate range] —
USB Operating Temperature [DATA_NEEDED: operating temperature range] —
RoHS ステータス [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: automotive qualification status] —
Device Type — USB 2.0 full-speed to dual UART interface bridge
USB Speed — USB 2.0 full speed
電源電圧 — 1.8 V or 3.3 V
Integrated Clock Generator — Yes
External Crystal Required — No
One-Time Programmable ROM — 296 bytes
Integrated Voltage Regulator — 3.45 V output
Power-On Reset — On-chip
Baud Rate — Programmable
Hardware Flow Control — Supported
Modem Control Signals — Full modem control signals
USB Termination Resistors — Not required; integrated USB transceiver
動作温度 — [DATA_NEEDED: operating temperature range]
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼