CP2105-F01-GM vs CP2105-F01-GMR 比較

詳細並排比較 CP2105-F01-GM 由 Silicon Labs 與 CP2105-F01-GMR 由 Silicon Labs. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Silicon Labs
CP2105-F01-GM CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM ✓ 啟用中
Silicon Labs
CP2105-F01-GMR CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR ✓ 啟用中

規格比較

參數 CP2105-F01-GM CP2105-F01-GMR
品牌 Silicon Labs Silicon Labs
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type USB 2.0 full-speed to dual-UART bridge controller —
USB Interface USB 2.0 full-speed —
UART Channels 2 asynchronous serial data buses 2 asynchronous serial data buses
Modem Control Full modem-control signals —
Integrated USB Transceiver Yes Yes
Integrated Oscillator Yes —
Programmable ROM One-time programmable ROM —
Digital I/O 5 digital I/O pins —
封裝 24-QFN, 4 x 4 mm QFN-24, 4 x 4 mm
Package Terminology QFN-24, also described as MLF or MLP in the verified datasheet snippet —
Exposed Pad Exposed pad package indicated by the verified datasheet/distributor descriptions —
Interface Category USB-to-UART interface IC —
Host Connectivity USB host connection —
Legacy Serial Support USB-to-serial bridge for legacy serial designs —
Driver Support Royalty-free drivers identified by Silicon Labs product-page result —
Operating Supply [DATA_NEEDED: operating supply voltage] —
UART Baud Rate [DATA_NEEDED: UART baud-rate range] —
USB Operating Temperature [DATA_NEEDED: operating temperature range] —
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: automotive qualification status] —
Device Type — USB 2.0 full-speed to dual UART interface bridge
USB Speed — USB 2.0 full speed
供應電壓 — 1.8 V or 3.3 V
Integrated Clock Generator — Yes
External Crystal Required — No
One-Time Programmable ROM — 296 bytes
Integrated Voltage Regulator — 3.45 V output
Power-On Reset — On-chip
Baud Rate — Programmable
Hardware Flow Control — Supported
Modem Control Signals — Full modem control signals
USB Termination Resistors — Not required; integrated USB transceiver
工作溫度 — [DATA_NEEDED: operating temperature range]
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價