DRV8303DCAR vs DRV8301DCAR तुलना
विस्तृत दोनों ओर की तुलना DRV8303DCAR द्वारा Texas Instruments और DRV8301DCAR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
DRV8301DCAR - 65V 3-Phase Gate Driver with Buck Regulator & SPI | Texas Instruments
DRV8301DCAR ✓ सक्रियविशेषता तुलना
| पैरामीटर | DRV8303DCAR | DRV8301DCAR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Motor Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Three-phase gate driver (pre-driver) with dual current-shunt amplifiers | — |
| टोपोलॉजी | Three half-bridge pre-drivers for external N-channel MOSFETs | 3-phase gate driver (pre-driver) for 6 N-channel MOSFETs |
| Peak Source Gate Current | 1.7 A | — |
| Peak Sink Gate Current | 2.3 A | — |
| Maximum Supply Voltage (VBS/VGLS abs max) | 65 V | — |
| Operating Supply Voltage (VM) | 6 V to 60 V | — |
| Logic Supply Voltage (VDD) | 3.3 V or 5 V (1.8 V compatible inputs) | — |
| Number of Half-Bridge Channels | 3 | — |
| Integrated Current-Shunt Amplifiers | 2 (bidirectional, programmable gain) | — |
| Current-Shunt Amplifier Gain Settings | 5 / 10 / 20 / 40 V/VIA (SPI configurable) | — |
| इंटरफ़ेस | SPI (configuration) + 6 PWM inputs (EN, IN, GH) | — |
| Bootstrap Architecture | Integrated bootstrap diode with trickle-charge pump, supports 100% duty cycle | — |
| Dead-Time Control | Programmable via SPI | — |
| Protection Features | UVLO (gate-drive and bootstrap), OC (programmable), OT warning, OT shutdown, phase fault from SPIs | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | -40 °C to +125 °C |
| पैकेज | HTSSOP-48 (DCA) with PowerPAD, 12.5 mm × 6.1 mm | 56-pin HTSSOP (DCA) with PowerPAD, 14.0 mm × 6.1 mm |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 3 (per TI product page) | 3 (168 hours) |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free | Yes | — |
| Motor Supply Voltage (VM) | — | 8 V to 60 V (absolute max 65 V) |
| Gate Drive Current (per phase) | — | 5 mA to 60 mA (programmable via SPI) |
| Charge Pump Supply | — | 10 V to 12 V (for 100% HS duty cycle) |
| Integrated Current Shunt Amplifiers | — | Dual, 4.6 V/V to 80 V/V gain, 5 µs settling |
| Integrated Buck Regulator | — | 1.5 A synchronous, 0.8 V to 8.5 V adjustable, 3.3 V / 5 V preset |
| Control Interface | — | 6-PWM (3-PWM mode selectable) + SPI |
| Dead-Time | — | Programmable via SPI (adaptive) |
| Protections | — | OCP, OTP, UVLO, gate-drive fault, shoot-through prevention |
| SPI Max Clock Frequency | — | 5 MHz |