DRV8303DCAR vs DRV8301DCAR Perbandingan

Perbandingan bersamaan detil DRV8303DCAR dari Texas Instruments dan DRV8301DCAR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
DRV8303DCAR DRV8303DCAR - 65V 3-Phase Gate Driver w/ Dual CSA & SPI | TI

DRV8303DCAR - 65V 3-Phase Gate Driver w/ Dual CSA & SPI | TI

DRV8303DCAR ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum DRV8303DCAR DRV8301DCAR
Merek Texas Instruments Texas Instruments
Kategori Motor Drivers Motor Drivers
Status Lingkungan Hidup Aktif Aktif
Product Type Three-phase gate driver (pre-driver) with dual current-shunt amplifiers —
Topologi Three half-bridge pre-drivers for external N-channel MOSFETs 3-phase gate driver (pre-driver) for 6 N-channel MOSFETs
Peak Source Gate Current 1.7 A —
Peak Sink Gate Current 2.3 A —
Maximum Supply Voltage (VBS/VGLS abs max) 65 V —
Operating Supply Voltage (VM) 6 V to 60 V —
Logic Supply Voltage (VDD) 3.3 V or 5 V (1.8 V compatible inputs) —
Number of Half-Bridge Channels 3 —
Integrated Current-Shunt Amplifiers 2 (bidirectional, programmable gain) —
Current-Shunt Amplifier Gain Settings 5 / 10 / 20 / 40 V/VIA (SPI configurable) —
Antarmuka SPI (configuration) + 6 PWM inputs (EN, IN, GH) —
Bootstrap Architecture Integrated bootstrap diode with trickle-charge pump, supports 100% duty cycle —
Dead-Time Control Programmable via SPI —
Protection Features UVLO (gate-drive and bootstrap), OC (programmable), OT warning, OT shutdown, phase fault from SPIs —
Rentang Suhu Kerja -40 °C to +125 °C -40 °C to +125 °C
Paket HTSSOP-48 (DCA) with PowerPAD, 12.5 mm × 6.1 mm 56-pin HTSSOP (DCA) with PowerPAD, 14.0 mm × 6.1 mm
Tipe Mounting Surface Mount Surface Mount
Level MSL 3 (per TI product page) 3 (168 hours)
Status RoHS Compliant Compliant
Lead-Free Yes —
Motor Supply Voltage (VM) — 8 V to 60 V (absolute max 65 V)
Gate Drive Current (per phase) — 5 mA to 60 mA (programmable via SPI)
Charge Pump Supply — 10 V to 12 V (for 100% HS duty cycle)
Integrated Current Shunt Amplifiers — Dual, 4.6 V/V to 80 V/V gain, 5 µs settling
Integrated Buck Regulator — 1.5 A synchronous, 0.8 V to 8.5 V adjustable, 3.3 V / 5 V preset
Control Interface — 6-PWM (3-PWM mode selectable) + SPI
Dead-Time — Programmable via SPI (adaptive)
Protections — OCP, OTP, UVLO, gate-drive fault, shoot-through prevention
SPI Max Clock Frequency — 5 MHz

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon