DRV8434RGER vs DRV8434ARGER तुलना

विस्तृत दोनों ओर की तुलना DRV8434RGER द्वारा Texas Instruments और DRV8434ARGER द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
DRV8434RGER DRV8434RGER - 48V 2.5A Stepper Driver VQFN-24 | Texas Instruments

DRV8434RGER - 48V 2.5A Stepper Driver VQFN-24 | Texas Instruments

DRV8434RGER ✓ सक्रिय
Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ सक्रिय

विशेषता तुलना

पैरामीटर DRV8434RGER DRV8434ARGER
ब्रांड Texas Instruments Texas Instruments
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Motor Type Bipolar stepper (two-phase) Bipolar stepper
Supply Voltage (VM) 4.5 V to 48 V 4.5 V to 48 V
Continuous Output Current (per H-bridge) 2.5 A —
Peak Output Current [DATA_NEEDED: peak current] —
Microstepping Resolution Up to 1/256 Full-step to 1/256 step
Control Interface STEP/DIRECTION (PWM optional) Step/Direction + SPI
Current Sensing Integrated (no external shunt) Integrated (no external sense resistor)
Decay Mode SmartTune (automatic), configurable Smart Tune (mixed decay)
On-Resistance HS+LS (typ.) [DATA_NEEDED: Rdson per bridge] —
Sleep Current 2 uA typical —
Internal Reference Voltage 3.3 V —
Logic Input Voltage 1.8 V, 3.3 V, 5.0 V compatible —
PWM Off-Time Options 7, 16, 24, 32 microseconds —
ऑपरेटिंग तापमान रेंज -40 C to +125 C —
पैकेज VQFN-24 (RGE) 4x4 mm with thermal pad VQFN-24 (RGE) 4x4 mm with thermal pad
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 2 (per JEDEC J-STD-020) 2 (1 year floor life)
RoHS स्थिति Compliant Compliant
Lead-Free / Halogen-Free Yes / Yes —
Spread Spectrum Clocking Yes —
Number of H-Bridges — 2
आउटपुट कॉन्फ़िगरेशन — NMOS H-bridge
Full-Scale Output Current — 2.5 A per phase (peak)
RMS Output Current — 1.5 A per phase (typical)
Stall Detection — Yes (GPIO output)
Sleep Pin — Yes (nSLEEP, active low)
Fault Pin — Yes (nFAULT, active low, open-drain)
Protection Features — UVLO, OCP, OVP, OTP, open load, stall
ऑपरेटिंग तापमान — -40 C to +125 C

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध