EP1K30TI144-2 vs EP1K30TI144-3N तुलना
विस्तृत दोनों ओर की तुलना EP1K30TI144-2 द्वारा Intel और EP1K30TI144-3N द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EP1K30TI144-2 | EP1K30TI144-3N |
|---|---|---|
| ब्रांड | Intel | Altera |
| श्रेणी | FPGA & CPLD | FPGA & CPLD |
| लाइफसाइकिल स्थिति | Obsolete | NRND |
| Family | ACEX-1K | ACEX 1K |
| Series | EP1K30 | EP1K30 |
| Logic Elements / Cells | 1728 | — |
| Total RAM Bits | 24576 | — |
| Number of Logic Array Blocks (LABs) | 216 | — |
| Equivalent Gates | 30,000 | — |
| User I/O Count | 102 | — |
| Number of I/O Banks | 4 | — |
| Supply Voltage - Core | 2.5 V (2.375 V min, 2.625 V max) | — |
| Supply Voltage - I/O | 2.5 V / 3.3 V / 5.0 V (multiVolt) | — |
| Maximum Internal Frequency | 200 MHz | — |
| Process Technology | 0.22 µm CMOS, SRAM-based | 0.18 um CMOS, 4 metal layers |
| Embedded Memory Type | Dual-port EAB (Embedded Array Block) | — |
| पैकेज | 144-LQFP (TQFP), 22 mm × 22 mm, 0.5 mm pitch | TQFP-144 (0.5 mm pitch) |
| ऑपरेटिंग तापमान | -40 °C to +85 °C (Industrial, "I" suffix) | -40C to +85C (Industrial) |
| Speed Grade | -2 (mid-tier) | -3 (fastest in EP1K30 family) |
| Configuration Method | SRAM, requires external configuration PROM (EPC) | — |
| Programming Interface | JTAG (IEEE 1149.1) / IEEE 1532 ISP | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount (Gull-Wing) |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance - legacy part] | [DATA_NEEDED: RoHS status] |
| Logic Elements | — | 1,728 |
| Typical Gates | — | 30,000 |
| Usable Gates | — | 17,500 |
| Embedded Memory (EAB) | — | 24 Kbit (6 EABs of 4 Kbit each) |
| Maximum User I/O Pins | — | 102 |
| Dedicated Input Pins | — | 6 |
| Total Terminals | — | 144 |
| Core Supply Voltage | — | 2.5 V nominal (2.375 V min, 2.625 V max) |
| Configuration Modes | — | Passive Serial, Passive Parallel Async, Passive Parallel Sync, JTAG (IEEE 1149.1) |
| PLLs | — | 4 |
| Thermal Resistance (theta_JA) | — | Approximately 35-40 C/W (PCB-dependent) |