EPC21LC20 vs EPC2LC20 तुलना
विस्तृत दोनों ओर की तुलना EPC21LC20 द्वारा Intel और EPC2LC20 द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPC21LC20 | EPC2LC20 |
|---|---|---|
| ब्रांड | Intel | Altera |
| श्रेणी | Memory ICs | Memory ICs |
| लाइफसाइकिल स्थिति | सक्रिय | NRND |
| यूनिट मूल्य (USD) | — | $7.20 |
| मेमोरी प्रकार | Serial Configuration PROM (Flash-based, in-system programmable) | Non-volatile configuration PROM |
| Density | 2 Mb (2,097,152 bits) | — |
| Configuration Mode Supported | Serial (PS) for Altera SRAM-based LUT FPGAs | — |
| Maximum DCLK Frequency | 10 MHz | — |
| Access Time | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] | — |
| Programming Interface | IEEE 1149.1 (JTAG) | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant |
| Program/Erase Endurance | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] | — |
| Operating Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Standby Current | [DATA_NEEDED: ICCSB value] | — |
| Active Read Current | [DATA_NEEDED: ICC active current] | — |
| Operating Temperature (commercial) | 0 °C to +70 °C (LC suffix) | — |
| Operating Temperature (industrial) | [DATA_NEEDED: -40 to +85 °C for LI variant] | — |
| पैकेज / केस | 20-pin PLCC (J-lead, JEDEC MS-018) | — |
| माउंटिंग प्रकार | Surface Mount (PLCC socket or solder) | Surface Mount |
| MSL स्तर | [DATA_NEEDED: confirm moisture sensitivity level] | — |
| RoHS स्थिति | [DATA_NEEDED: confirm from Altera product page] | Non-Compliant (original Altera Pb-containing part) |
| Lead-Free (Pb-free) | [DATA_NEEDED: confirm] | — |
| Compatible FPGA Families | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) | — |
| JTAG Boundary-Scan Compliant | Yes (IEEE Std 1149.1) | — |
| Data Width | 1 bit (serial DATA output) | — |
| मेमोरी आकार | — | 1.6 Mbit |
| Configuration Interface | — | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (3.3-V operation) |
| ISP Voltage Range | — | 5.0 V or 3.3 V |
| Supported FPGA Families | — | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 |
| Cascade Support | — | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams |
| पैकेज | — | 20-pin PLCC (J-lead, 9x9 mm) |
| ऑपरेटिंग तापमान | — | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] |
| Lead-Free Version | — | EPC2LC20N available as lead-free equivalent |
| Programming Support | — | Altera Programming Unit (APU), Quartus II, JTAG programmer |
| Boundary-Scan | — | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG |