EPC21LC20 vs EPC2LC20 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng EPC21LC20 sa pamamagitan ng Intel at EPC2LC20 sa pamamagitan ng Altera. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Intel
EPC21LC20 - Altera 2 Mb Config PROM for SRAM-based LUT Devices | PLCC-20
EPC21LC20 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | EPC21LC20 | EPC2LC20 |
|---|---|---|
| Brand | Intel | Altera |
| Kategorya | Memory ICs | Memory ICs |
| Katayuan ng Lifecycle | Aktibo | NRND |
| Presyo ng Yunit (USD) | — | $7.20 |
| Uri ng Memory | Serial Configuration PROM (Flash-based, in-system programmable) | Non-volatile configuration PROM |
| Density | 2 Mb (2,097,152 bits) | — |
| Configuration Mode Supported | Serial (PS) for Altera SRAM-based LUT FPGAs | — |
| Maximum DCLK Frequency | 10 MHz | — |
| Access Time | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] | — |
| Programming Interface | IEEE 1149.1 (JTAG) | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant |
| Program/Erase Endurance | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] | — |
| Operating Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Standby Current | [DATA_NEEDED: ICCSB value] | — |
| Active Read Current | [DATA_NEEDED: ICC active current] | — |
| Operating Temperature (commercial) | 0 °C to +70 °C (LC suffix) | — |
| Operating Temperature (industrial) | [DATA_NEEDED: -40 to +85 °C for LI variant] | — |
| Packhaging / Kaso | 20-pin PLCC (J-lead, JEDEC MS-018) | — |
| Uri ng Pagpapasok | Surface Mount (PLCC socket or solder) | Surface Mount |
| Level ng MSL | [DATA_NEEDED: confirm moisture sensitivity level] | — |
| Tindminan RoHS | [DATA_NEEDED: confirm from Altera product page] | Non-Compliant (original Altera Pb-containing part) |
| Lead-Free (Pb-free) | [DATA_NEEDED: confirm] | — |
| Compatible FPGA Families | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) | — |
| JTAG Boundary-Scan Compliant | Yes (IEEE Std 1149.1) | — |
| Data Width | 1 bit (serial DATA output) | — |
| Laki ng Memory | — | 1.6 Mbit |
| Configuration Interface | — | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (3.3-V operation) |
| ISP Voltage Range | — | 5.0 V or 3.3 V |
| Supported FPGA Families | — | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 |
| Cascade Support | — | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams |
| Packhaging | — | 20-pin PLCC (J-lead, 9x9 mm) |
| Temperature na Operasyon | — | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] |
| Lead-Free Version | — | EPC2LC20N available as lead-free equivalent |
| Programming Support | — | Altera Programming Unit (APU), Quartus II, JTAG programmer |
| Boundary-Scan | — | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG |