EPC2L120N vs EPC22LC20 तुलना
विस्तृत दोनों ओर की तुलना EPC2L120N द्वारा Intel और EPC22LC20 द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPC2L120N | EPC22LC20 |
|---|---|---|
| ब्रांड | Intel | Intel |
| श्रेणी | FPGA & CPLD | FPGA & CPLD |
| लाइफसाइकिल स्थिति | Obsolete | Obsolete |
| Device Type | Configuration Device for SRAM-based LUT FPGAs | — |
| Manufacturer | Intel (formerly Altera) | — |
| Family | EPC2 (Enhanced Configuration Device) | — |
| Memory Capacity | 165,888 bits (400,000 gates equivalent) | — |
| Operating Voltage (VCCIO) | 2.7 V to 3.6 V | — |
| 5V Tolerance | Yes (5V-tolerant I/O) | — |
| Configuration Clock (FPP) | Up to 66 MHz | — |
| Configuration Clock (PS) | Up to 33 MHz | — |
| Internal Oscillator | 8 MHz with programmable divider | — |
| JTAG Interface | IEEE Std 1149.1 compliant, ISP support | — |
| Programming Cycles | 100,000 erase/program cycles | — |
| Sector Erase Time | [DATA_NEEDED: typical sector erase time] | — |
| पैकेज | 84-pin PLCC (J-Lead) | — |
| Configuration Schemes | FPP, PS, JTAG, daisy chain | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: industrial temp range] | 0 C to +70 C (commercial) |
| Supported FPGA Families | Cyclone, APEX, FLEX, Mercury, ACEX, Stratix | ACEX 1K, APEX II, APEX 20K, FLEX 10K |
| RoHS स्थिति | unknown | — |
| फ़ंक्शन | — | In-System Programmable Configuration PROM for SRAM-based FPGAs |
| मेमोरी आकार | — | 1.6 Mbit |
| Programmable Type | — | In System Programmable (IEEE 1532 / Jam STAPL) |
| Supply Voltage - Low Range | — | 3.0 V to 3.6 V |
| Supply Voltage - High Range | — | 4.75 V to 5.25 V |
| Configuration Interface | — | Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE) |
| Programming Interface | — | JTAG (IEEE 1149.1 / IEEE 1532) |
| पैकेज / केस | — | 20-LCC (J-Lead, 9 x 9 mm) |
| माउंटिंग प्रकार | — | Surface Mount (PLCC socket compatible) |
| Packaging | — | Tube |
| Minimum DC Input Voltage | — | -0.3 V |
| Input Overshoot Tolerance | — | 7.0 V for <100 mA, <20 ns no-load |
| Input Undershoot Tolerance | — | -2.0 V for <100 mA, <20 ns no-load |
| Lead-Free / RoHS | — | [DATA_NEEDED: lead-free status not in verified data] |