INA118P vs INA118PB तुलना
विस्तृत दोनों ओर की तुलना INA118P द्वारा Texas Instruments और INA118PB द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
INA118P - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118P ✓ सक्रियTexas Instruments
INA118PB - Precision Instrumentation Amplifier | Texas Instruments
INA118PB ✓ सक्रियविशेषता तुलना
| पैरामीटर | INA118P | INA118PB |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Precision, low-power instrumentation amplifier | Precision instrumentation amplifier |
| Number of Amplifier Circuits | 1 circuit | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Common-Mode Rejection Ratio | 110 dB minimum at gain 1000 | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| क्वाइसेंट करंट | 350 µA | 350 uA |
| Gain Range | 1 to 10000 | 1 to 10,000 |
| Gain Setting | One external resistor | — |
| Bandwidth | 70 kHz at gain 100 | — |
| Architecture | Three-op-amp design with current-feedback input circuitry | Three-op-amp design |
| पैकेज | 8-pin plastic DIP | 8-pin plastic DIP |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| ऑपरेटिंग तापमान | -40°C to +85°C | — |
| Number of Amplifiers | — | 1 circuit |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 110 dB at G = 1000 |
| Maximum Input Voltage | — | ±40 V |
| Maximum Supply Voltage | — | ±18 V |
| Minimum Single-Supply Voltage | — | 1.35 V |
| Minimum Dual-Supply Voltage | — | ±2.25 V |
| Bandwidth at Gain of 100 | — | 70 kHz |
| ऑपरेटिंग तापमान रेंज | — | -40°C to +85°C |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |