INA118P vs INA118PB مقایسه
مقایسه دقیق کنار به کنار INA118P توسط Texas Instruments و INA118PB توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
INA118P - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118P ✓ فعالTexas Instruments
INA118PB - Precision Instrumentation Amplifier | Texas Instruments
INA118PB ✓ فعالمقایسه مشخصات
| پارامتر | INA118P | INA118PB |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Amplifier ICs | Amplifier ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Precision, low-power instrumentation amplifier | Precision instrumentation amplifier |
| Number of Amplifier Circuits | 1 circuit | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Common-Mode Rejection Ratio | 110 dB minimum at gain 1000 | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| جریان سکون | 350 µA | 350 uA |
| Gain Range | 1 to 10000 | 1 to 10,000 |
| Gain Setting | One external resistor | — |
| Bandwidth | 70 kHz at gain 100 | — |
| Architecture | Three-op-amp design with current-feedback input circuitry | Three-op-amp design |
| بسته‌بندی | 8-pin plastic DIP | 8-pin plastic DIP |
| نوع نصب | Through-hole | Through-hole |
| دمای کاری | -40°C to +85°C | — |
| Number of Amplifiers | — | 1 circuit |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 110 dB at G = 1000 |
| Maximum Input Voltage | — | ±40 V |
| Maximum Supply Voltage | — | ±18 V |
| Minimum Single-Supply Voltage | — | 1.35 V |
| Minimum Dual-Supply Voltage | — | ±2.25 V |
| Bandwidth at Gain of 100 | — | 70 kHz |
| محدوده دمای کاری | — | -40°C to +85°C |
| وضعیت RoHS | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |