ISO1450BDWR vs ISO1432DWR तुलना
विस्तृत दोनों ओर की तुलना ISO1450BDWR द्वारा Texas Instruments और ISO1432DWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ सक्रियTexas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ISO1450BDWR | ISO1432DWR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Drivers, Receivers, Transceivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | Isolated half-duplex RS-485 / RS-422 transceiver | Transceiver, Isolated |
| Data Rate (max) | 50 Mbps | 12 Mbps |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Full |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | [DATA_NEEDED: typical value] |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | [DATA_NEEDED: HBM rating] |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| थर्मल शटडाउन | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| ऑपरेटिंग तापमान | -40C to +125C | -40 °C to +125 °C |
| पैकेज | SOIC-16 wide-body (DW), 16 pins | 16-pin SOIC (DW) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| RoHS स्थिति | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: CMTI value] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |