ISO1450BDWR vs ISO1432DWR Perbandingan
Perbandingan bersamaan detil ISO1450BDWR dari Texas Instruments dan ISO1432DWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktifTexas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISO1450BDWR | ISO1432DWR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Drivers, Receivers, Transceivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Status Stok | — | In Stock |
| Harga Unit (USD) | — | $4,92 |
| Fungsi | Isolated half-duplex RS-485 / RS-422 transceiver | Transceiver, Isolated |
| Data Rate (max) | 50 Mbps | 12 Mbps |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Full |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | [DATA_NEEDED: typical value] |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | [DATA_NEEDED: HBM rating] |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| Penutupan Panas | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Suhu Kerja | -40C to +125C | -40 °C to +125 °C |
| Paket | SOIC-16 wide-body (DW), 16 pins | 16-pin SOIC (DW) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| Status RoHS | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: CMTI value] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |